• Journal of radiological science and technology
• /
• v.21 no.1
• /
• pp.24-28
• /
• 1998

A conventional treatment machine shapes x-ray fields by a set of dense metal collimators(jaws) built into the machine. These collimators are positioned by the therapist using hand controls in the treatment room, and usually remain stationary during treatment. The collimator jaws of treatment machines produce rectangular beams. Conventional beam shaping is accomplished through the use of a combination of these collimator jaws and secondary custom beam blocks attached to the accelerator beyond the collimator Jaws. The jaw positions for a particular field can be retrieved from a computer. One application of this increased capability is replacement of beam blocks for field-shaping with the MLC. There are three basic applications of the MLC. The first application is to replace conventional blocking. A second function of the MLC is related to conformal therapy, adjusting the field shape to match the beam's eye view projection of a planning target volume during treatment. The third application is the use of the MLC to achieve beam intensity modulation. The aim of this paper is to provide basic principle and to state fundamental concepts needed to implement the use of a multileaf collimator in the conventional clinical setting. The use of MLC field shaping is likely to save time and to incur a lower operating cost when compared to the use of beam blocks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1808-1815
• /
• 2016

Stable operation of the dam and the river is directly related to the life and property of citizens, and hydrological observation data reliability is essential to the safety against disaster. Even though real-time data acquisition with high accuracy is needed for scientific and reliable water resources management, currently operating water gauges installed on the upper and down stream of dams or rivers are not easy to be calibrated or corrected on site to ensure higher reliability. K-water Institute has been operating an international accredited calibration laboratory for flows meters, rainfall and water gauges. Rainfall gauges are calibrated in the fixed standard room or on-site. However, due to the absence of on-site calibration procedure and system, on-site calibration for the water gauges are performed by an external agency. Therefore, a development of standard calibration procedure and system for on-site calibration of water gauges is needed to improve the reliability of observed hydrological data.

• Journal of Intelligence and Information Systems
• /
• v.12 no.3
• /
• pp.47-65
• /
• 2006

These days, the number of automated container terminals is increasing to encourage the productivity of the container terminal inside and outside of the country. So far, there have been a lot of researches on the operating one type of equipments in a container terminal. However, there is still room for further improvement as none of equipment works itself but cooperate each other to finish a job, which means synchronization among the equipments is necessary. Among lots of equipments in a terminal, this paper concerns with the operation of ATCs (Automated Transfer Crane) and YTs (Yard Truck). The purpose of this paper is to find the efficient heuristic methods for operating ATCs and YTs that can set up a schedule in a real time. Moreover, using simulation this paper shows the efficient stacking strategy to decide the location of containers to be put and the proper selection range of YTs.

• Journal of Korean Clinical Nursing Research
• /
• v.18 no.1
• /
• pp.99-110
• /
• 2012

Purpose: The purpose of this study was to examine the puncture incidence of surgical gloves in an operational setting. Methods: The 277 surgical gloves were used collecting at one general hospital located in Seoul from February 1, 2011 to April 3. The data were analyzed by $x^2$ test, Fisher's exact test, and multiple logistic regression. Results: In the dental and orthopedic department, the puncture incidence were significantly higher than others. The time of wearing gloves demonstrated significant difference: The group 181-240 minutes had a significantly higher than those with under 90, 91-180, or over 240 minutes. The influencing factors were as follows. Compared to that of the 2nd assistants, the puncture incidence rates of the surgeons were 9.91 times, scrub nurses were 8.39 times higher respectively. The participants in work experience under 1 year showed a 4.58 times higher than those with over 7 years. In addition, compared to the puncture incidence rate of neurosurgery department, the 17.41 times in cardio-thoracic surgery, 13.89 times in dental surgery, 4.93 times in gynecology, and 4.97 times in orthopedics higher respectively. Conclusion: There is a need for training operational room personnels to occasionally exchange the gloves even during the procedure and to use double surgical gloves.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2453-2466
• /
• 2022

Nuclear power plant operators in the main control room are exposed to stressful conditions in emergency situations as immediate and appropriate mitigations are required. While emergency operating procedures (EOPs) provide operators with the appropriate tasks and diagnostic guidelines, EOPs have static properties that make it difficult to reflect the dynamic changes of the plant. Due to this static nature, operator workloads increase because unrelated information must be screened out and numerous displays must be checked to obtain the plant status. Generally, excessive workloads should be reduced because they can lead to human errors that may adversely affect nuclear power plant safety. This paper presents a framework for an operator support system that can substitute the initial responses of the EOPs, or in other words the immediate actions and diagnostic procedures, in the early stages of an emergency. The system assists operators in emergency operations as follows: performing the monitoring tasks in parallel, identifying current risk and latent risk causality, diagnosing the accident, and displaying all information intuitively with a master logic diagram. The risk causalities are analyzed with a functional modeling methodology called multilevel flow modeling. This system is expected to reduce workloads and the time for performing initial emergency response procedures.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.317-318
• /
• 1998

The purpose of this study is to design and develop the circuit of the dual mode syringe pump. Syringe pump is used in intensive care unit, delivery room, pediatric room, operating theater and other fields of hospital at present. Normally the syringe pump delivers one medicine in one case, but in case of intensive care unit, it is necessary to deliver more than two kinds of medicines at a time. Therefore we have designed dual mode syringe pump. We used RISC type microcontroller, PIC17C44 as master controller, and PIC16C73 as slave cpu using for the low power consumption. The performance of system is evaluated by analysis of the linearity and accuracy which is the most important factors in application. While the proposed system shows a acceptable linearity and accuracy, a further research about reducing the errorr should be done.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.188-195
• /
• 2002

To investigate the degradation of mechanical properties induced mainly by neutron irradiation, the tensile tests were conducted from room temperature to 300\\`c using the irradiated and the unirradiated Zr-2.5Nb pressure tube materials. The irradiated longitudinal and transverse specimens were collected from the coolant inlet, middle, and outlet parts of M-11 tube which had been operated in Wolsung CANDU Unit-1 and exposed to different operating temperatures and irradiation fluences. The different tensile behavior was characterized not by the fluences of irradiation but by the tensile loading direction. The transverse specimen showed the higher strength and lower elongation than those of the longitudinal one. It was believed that these phenomena resulted from the microstructure anisotropy caused by the extrusion process. The increased strength hardening and decreased elongation embrittlement of the irradiated material were compard to those of the unirradiated one. While the tensile strength of the inlet was higher than that of the outlet, the elongation of the inlet was lower than that of outlet. Considering the operation condition, it was proposed that the operating temperature could be a more effective parameter than the irradiation fluence for long-time life. Through the TEM observation, it was found that while the a-type dislocation density was increased, the c-type dislocation was not changed in the irradiated. The fact that the higher dislocation density was sequentially distributed over the inlet, the middle, and the outlet parts was consistent with the distribution of the tensile strength.

• Korean Journal of Adult Nursing
• /
• v.25 no.4
• /
• pp.473-482
• /
• 2013

Purpose: The purpose of this study was to investigate the effects of a structured preoperative instruction upon anxiety and postoperative self-care compliance. Methods: A randomized control group pre-post design was used. Sixty subjects undergoing cataract surgery were randomly assigned to one of two groups. The instruction consisted of cataract surgery procedure, sensory information, deep breathing, use of eye drop, and post op self-care regimen and was provided to the experimental group with control group receiving an usual treatment. State anxiety NRS, pulse, BP, and self-care compliance scale developed by Cho & Rho were used. Data were collected at two time periods: on the day of surgery in the clinic and prior to anesthesia in the operating room. The postoperative self-care compliance scores were measured at their second visits to the hospital after surgery. Data were analyzed using Kolmogorov Smirnov test, t-test, and Mann-Whitney U test. Results: There were significant differences between the two groups in the postoperative state anxiety (t=-3.57, p=.001) and the postoperative self-care compliance score (t=3.92, p<.001). There were no significant difference between the two groups in the postoperative blood pressure and pulse rate. Conclusion: The results of this study suggest that the structured preoperative instruction could be a nursing intervention for cataract surgery patients.

• Fire Science and Engineering
• /
• v.17 no.2
• /
• pp.6-9
• /
• 2003

Recently, forced ventilating air conditioning system has been widely used in modern buildings. However, It is obvious that this kind of system may affect on the response of fire detectors at real fire incidents, especially, on the ionization smoke detector, which is critically influenced by air stream. Therefore we studied to verify the response characteristics of air stream by ionization smoke detector for the design of facilities in practice. In this study, experiments were executed to examine the correlation between air velocity and the ionization detector's responses with var-ious air velocity and smoke densities in the simulated test room. As a result of experiments, ionization detector's operating time is in reverse proportion to air velocity. And the detector shows more sensitive reaction when the velocity of smoke stream increase over 60 cm/s. In addition, it was shown that ionization smoke detector is more sensitive to smoldering fires in paper than that in petro-chemicals.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.295-296
• /
• 2009

There are various application of liquid crystal materials to devices, especially, blue phase liquid crystal (BPLC) and nano-structured liquid crystal mixture have been studied recently because BPs existing temperature range has been expanded by polymer-stabilization and liquid crystal has been confined in room which has certain coherence length so that their particular characters, such as fast response time and optically isotropic state at no electric field, could apply to advanced liquid crystal display devices. However, there is an crucial problem which is high operating voltage from low Kerr constant and limited electric field utilization using in-plain electric field. In this paper, we will analyze cell structure in the way of using electric field and show effective electric field utilization to reduce operating voltage.