• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.257-259
• /
• 1996

This paper presents the active eye system for tracking a moving object in 3D space. A prototype system able to track a moving object is designed and implemented. The mechanical system ables the control of platform that consists of binocular camera and also the control of the vergence angle of each camera by step motor. Each camera has two degrees of freedom. The image features of the object are extracted from complicated environment by using zero disparity filtering(ZDF). From the cnetroid of the image features the gaze point on object is calculated and the vergence angle of each camera is controlled by step motor. The Proposed method is implemented on the prototype with robust and fast calculation time.

• 대한물리의학회지
• /
• 제12권3호
• /
• pp.99-104
• /
• 2017

PURPOSE: Gait disturbances in patients with hemiplegic stroke involve asymmetry of stance time. Step box training is used to supplement the limitations of stair walking training and increasing the torque value of the paralyzed lower leg's strength. This study aimed to investigate whether step-up training on unstable support could change walking ability in patients with chronic stroke. METHODS: Thirty stroke patients were randomly assigned to the step-up training group (experimental group), that performed training on an unstable surface, and the control group, that performed training on a stable surface. Walking speed, step length, and cadence were measured before and after training. Paired t-tests were used to compare pre- and post-intervention data, while the independent samples t-test was used to determine intergroup differences. Values of p < .05 were considered statistically significant. RESULTS: There was a significant difference in walking ability before versus after the intervention in both groups, although the experimental group showed greater differences than the control group (walking velocity by 8.1%; step length of the non-paralyzed side by 6.9%, respectively; p<.05). CONCLUSION: Step-up training might be more effective on an unstable surface than on a stable surface for increasing walking speed and step length of the non-paralyzed side.

• Journal of Construction Engineering and Project Management
• /
• 제10권1호
• /
• pp.16-32
• /
• 2020

Cost and time control of projects is important in preventing project failure. However, achieving effective cost and time control in practice is often challenging. The challenges of project cost and time control in practice are investigated by carrying out a questionnaire survey on the top 150 construction contractors in the UK followed by in-depth semi-structured interviews of practitioners from 15 construction companies in the country. Quantitative analysis reveals that design change is the most important factor inhibiting the ability of UK contractors from effectively controlling both the cost and time of construction projects. Four of the top five factors inhibiting effective cost control are also the top factors inhibiting effective time control albeit in a different order. These top factors-design changes, inaccurate evaluation of project time/duration, risk and uncertainty, non-performance of subcontractors and nominated suppliers were also found to be endogenous factors to the project. Additionally, qualitative analysis of the interviews reveals 16 key challenges to prevent for effective project cost and time control in practice. These are classified into four categorised based on where they stem from as follows; from the organisation (1. Lack of integration of cost and time during project control, 2. lack of management buy-in, 3. complicated project control systems and processes, 4. lack of a project control training regime); from the construction management/project management approach (5. Lapses in integration of interfaces, 6. project control not being implemented from the early stages of a project, 7. inefficient utilisation and control of labour, 8. limited time devoted to planning how a project will be controlled at the outset); from the client; (9. Excessive authorisation gates, 10. use of adversarial and non-collaborative forms of contracts, 11. communication problems within client set-up, 12. obstructive client representatives) and; from the project team (13. Lack of detailed/complete design, 14. lack of trust among the project partners, 15. limited time devoted to project control on site, 16. non-factual reporting). The study posits that knowledge of these project control inhibiting factors and challenges is the first step at ensuring they are avoided and enable the implementation of a more effective project cost and time control process in practice.

• 전기학회논문지P
• /
• 제65권4호
• /
• pp.255-261
• /
• 2016

Korean Power System are operating a load shedding system to prevent voltage instability phenomenon caused by severe line contingencies. In order to apply the load shedding scheme should be selected a location, amount, delay time. Current load shedding system is load shedding amount that has been calculated in the steady-state analysis to load shed the total amount in first level, load shedding amount calculated in advance, it is possible to perform an unnecessary load shedding. In this paper, set a multi-level load shedding control strategy step-by-step selection of load shedding amount for the prevention of excessive load shedding. In addition, through a voltage resilience analysis of the power system by applying motor load ratio and sensitivity parameter to selection the multi level load shedding ratio and delay time. For this reason, to take advantage of the limit data of interchange power, by utilizing interface power flow data to set a multi-level load shedding control strategy for the stabilization of the Korean Power System.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.654-667
• /
• 2003

This paper presents a consequence of the systematic approach to identify the aerodynamic parameters of an unmanned aerial vehicle (UAV) equipped with the automatic flight control system. A 3-2-1-1 excitation is applied for the longitudinal mode while a multi-step input is applied for lateral/directional excitation. Optimal time step for excitation is sought to provide the broad input bandwidth. A fully automated programmed flight test method provides high-quality flight data for system identification using the flight control computer with longitudinal and lateral/directional autopilots, which enable the separation of each motion during the flight test. The accuracy of the longitudinal system identification is improved by an additional use of the closed-loop flight test data. A constrained optimization scheme is applied to estimate the aerodynamic coefficients that best describe the time response of the vehicle. An appropriate weighting function is introduced to balance the flight modes. As a result, concurrent system models are obtained for a wide envelope of both longitudinal and lateral/directional flight maneuvers while maintaining the physical meanings of each parameter.

• Journal of Astronomy and Space Sciences
• /
• 제15권1호
• /
• pp.235-244
• /
• 1998

인공위성의 궤도조정에 사용되는 소모연료의 최적화를 위해, 비 선형 제어 시스템인 슬라이딩 제어 기법을 사용하여 지구 비대칭 중력장에 의해 섭동력을 고려한 궤도조정 문제의 해를 구하였다. 결합 방정식을 이용한 해법을 통해 총 속도 변화량이 최소가 되는 Lambert 궤도를 목표궤도로 설정하고 그에 따른 궤도조정 시간을 결정하였다. 결정된 궤도조정 시간이 종료되는 시점에서 제한된 추력에 의해 제어되는 인공위성의 상태 백터가 경계조건과 일치되도록 하기 위하여, 슬라이딩 제어를 반복적으로 사용하는 2단 슬라이딩 제어기법을 도입하였으며, 이를 인공위성 랑데뷰 문제에 적용하여 최적 에어방법에 의한 결과와 비교하였다. 새롭게 제안된 제어방법을 이용한 궤도조정은 이상적인 전이궤도인 Lambert 궤도와 근접한 궤도를 갖도록 하는 thrust-coast-thrust 형태의 추력을 나타내었으며, 이 때 필요한 속도의 변화량은 Lambert's two-impulsive 방법에 의한 값에 매우 근접한 값을 나타내었다. 또한 궤도조정 시간이 종료되었을 때, 궤도의 모든 상태변수들이 최종 경계조건과 거의 일치되는 결과를 얻을 수 있었다.

• 동아시아식생활학회지
• /
• 제25권6호
• /
• pp.1049-1057
• /
• 2015

This study investigated the physicochemical properties of Dioscorea batatas for improvement of biological activities during a three-step steaming process, steaming $120^{\circ}C$ for 30 min and hot air drying at $60^{\circ}C$ for 8 hrs. Samples were extracted with 70% ethanol and analyzed for free sugars, and organic acids were analyzed by HPLC. The DPPH & ABTS radical scavenging activities, crude saponin, water binding capacity, oil absorption, and ${\alpha}$-glucosidase activity were measured. The major free sugars in all samples were fructose, maltose, and sucrose, and the free sugar contents increased to 157~235% after the three-step steaming process compared to the control. Organic acid contents of samples treated by steaming increased to greater than 55.8 mg/100g. The ABTS radical scavenging activity significantly increased with repeated steaming process, especially after the three-step process. As the time of steaming process increased, DPPH radical scavenging activity increased from 26.99% fresh Dioscorea batatas to 80.46~97.79% after the three-step process. Crude saponin content increased rapidly as steaming time increased, but decreased after the three-step process steaming process. The water-binding capacities of the samples treated by steaming process were higher than that of the control, whereas oil absorption decreased as steaming time increased. From the results, steaming process could be suggested as beneficial for controlling fat intake. Compared to acarbose, a known antidiabetic drug, used as a positive control, ${\alpha}$-glucosidase inhibitory activity of samples treated by two-step steaming was among the samples. The results suggest that Dioscorea batatas treated by steaming process has antioxidative and anti-diabetis activities and can be used as a natural health product.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.5-10
• /
• 2005

We deal with the sliding mode control using the time delay estimation. The time delay estimation is able to weaken the need for obtaining a quantitative plant model analogous to the real plant so the sliding mode control with a time delay estimation (SMCTE) is very suitable for plant such as SMA actuators whose quantitative model is difficult to obtain. We have already studied the application of the time delay control (TDC) to SMA actuators in other literature. Based on the previous study on the TDC, we developed the gain tuning method for the SMCTE, which results were nearly the same as the TDC. With respect to the step response, the SMCTE proved its predominance in a comparison with other control schemes such as the PID control and the relay control. As well as the contribution of the above control methodology, the model identification for SMA actuators has also been studied. The dynamics for an SMA actuator was newly derived using the modified Liang's model. The derived dynamics showed a continuity at the change of the phase transformation process but the original Liang's model could not.

• 제어로봇시스템학회논문지
• /
• 제10권3호
• /
• pp.205-215
• /
• 2004

The characteristic ratio assignment (CRA) method〔1〕 is new polynomial approach which allows to directly address the transient responses such as overshoot and speed of response time in time domain specifications. The method is based on the relationships between time response and characteristic ratios($\alpha_i$ ) and generalized time constant (T), which are defined in terms of coefficients of characteristic polynomial. However, even though the CRA can apply to developing a linear controller that meets good transient responses, there are still some fundamental questions to be explored. For the purpose of this, we have analyzed several sensitivities of a linear system with respect to the changes of coefficients itself and $\alpha_i$ of denominator polynomial. They are (i) the unnormalized root sensitivity : to determine how the poles change as $\alpha_i$ changes, and (ii) the function sensitivity to determine the sensitivity of step response to the change of o, and to analyze the sensitivity of frequency response as o, changes. As an other important result, it is shown that, under any fixed T and coefficient of the lowest order of s in denominator, the step response is dominantly affected merely by $\alpha_1, alpha_2 and alpha_3$ regardless of the order of denominator higher than 4. This means that the rest of the$\alpha_i$ s have little effect on the step response. These results provide some useful insight and background theory when we select $\alpha_i$ and T to compose a reference model, and in particular when we design a low order controllers such as PID controller.

• 대한전자공학회논문지
• /
• 제21권4호
• /
• pp.78-83
• /
• 1984

Hyperstability 이론에 의한 연속시간 시스템의 제어 알고리즘을 이산시간 선형시변 시스템의 적응제어에 직접 이용하여 시스템의 설계를 간단하게 하였다. 기준인력으로서 계단함수와 램프함수를 인가하여 설계된 시스템의 동작특성을 조사해 본 결과 공정의 출력이 모델의 출력에 적응함을 알 수 있었다.