• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.10
• /
• pp.833-839
• /
• 2012

In this paper, we analyze the reconstruction error in the modeling of flow field on BFS(Backward Facing Step). In order for the mathematical modelling of a density on the field, the spatial and temporal modes are extracted by POD(Proper Orthogonal Decomposition) method. After formulating the modeling error, we summarize the relationship between the energy strength and the reconstruction errors. Moreover the allowable modeling error limits in the flow control point of view are confined by analysing in the frequency domain as well as time domain of the reconstructed data.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.10
• /
• pp.974-981
• /
• 2009

In this paper, a method of auto-tuning of PID (Proportional-Integral-Derivative) and PIDA (Proportional-Integral-Derivative-Acceleration) controllers is proposed that can be applied to a time-delayed second order model. The proposed identification method is based on step responses, but it can be easily automated rising digital controller unlike the existing graphical identification methods. We provide a ways to yield parameter identifications which is independent to initial values of the plants. The tuning rule is based on the pole-placement strategy and is formulated so that it can be implemented using a digital controller with ease.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.4
• /
• pp.313-318
• /
• 2010

This paper deals with the relationship between zeros and step response of the second and third order LTI (Linear Time Invariant) SISO (Single-Input and Single-Output) systems with complex poles. Although it has been known that the maximum number of local extrema is less than the number of zeros in the system with only real poles[8], some cases with complex poles are shown in this paper to have many local extrema. This paper proposes monotone nondecreasing conditions and describes the relationship between the transient response and the number of local extrema in step response with each region of zeros.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2451-2460
• /
• 2000

In order to minimize straightness error of deflected shaft, a geometric adaptive straightness controller system is studied. A multi-step straightening and a three-point bending process have been developed for the geometric adaptive straightness controller. Load-deflection relationship, on-line identification of variations of material properties, on-line springback prediction, and real-time hydraulic control methodology are studied for the three-point bending process. By deflection pattern analysis and fuzzy self-learning method in the multi-step straightening process, a straightening point and direction, desired permanent deflection and supporting condition are determined. An automatic straightening machine has been fabricated for rack bars by using the developed ideas. Validity of the proposed system is verified through experiments.

• Structural Engineering and Mechanics
• /
• v.40 no.2
• /
• pp.233-243
• /
• 2011

This paper presents a theoretical study of a model predictive control (MPC) strategy employed in semi-active control system with magnetorheological (MR) dampers to reduce the responses of seismically excited structures. The MPC scheme is based on a prediction model of the system response to obtain the control actions by minimizing an objective function, which can compensate for the effect of time delay that occurred in real application. As an example, a 5-story building frame equipped with two 20 kN MR dampers is presented to demonstrate the performance of the proposed MPC scheme for addressing time delay and reducing the structural responses under different earthquakes, in which the predictive length l = 5 and the delayed time step d = 10, 20, 40, 60, 100 are considered. Comparison with passive-off, passive-on, and linear quadratic Gaussian (LQG) control strategy indicates that MPC scheme exhibits good control performance similar to the LQG control strategy, both have better control effectiveness than two passive control methods for most cases, and the MPC scheme used in semi-active control system show more effectiveness and robustness for addressing time delay and protecting structures during earthquakes.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.456-458
• /
• 1986

A method for on-line tuning of the PID-controller parameters for a discrete-time multivariable process system is presented. And it is based on a step change in the controller set point. The system is presumed to be a linear, open loop stable and known one. The controller parameters are determined by the performance criterion and Fletcher-Powell methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.978-983
• /
• 2003

In this paper, we propose a fault detection method for extended Kalman filter in decentralized filter structure. To detect a fault, a consistency between filter output and a monitoring signal is tested. State propagators are used to obtain the monitoring signal. However, the output of state propagator increases in magnitude and finally diverges as time runs. To solve such problem, two-propagator method was proposed for linear system. Two propagators are reset by Kalman filter output, alternatively, to avoid divergence. But a test statistics change abruptly at the reset instant in that method. Hence a N-step propagator method is proposed to fix up the problem. In the N-step propagator, only time propagations are performed from k-N+1 step to k step without measurement updates. A test statistics are defined by errors and its covariance between extended Kalman filter and N-step propagator. These fault detection methods are applied to integrated strapdown inertial navigation system (SDINS). By computer simulation, it is shown that the proposed methods detect a fault effectively.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.491-496
• /
• 2002

Most partitioning algorithms for hardware- software codesign do not consider scheduling. Therefore, partitioning should be performed again if time constraints art not satisfied in scheduling the partitioned results. Existing FDS-applied methods which consider scheduling in partitioning decide the control step of the node to schedule while selecting nodes for partitioning. In selecting nodes for partitioning, several aspects should be considered together such as added cost or time due to the partition of the node, or the degree of interference due to the scheduling of the node. At this time, the induced force, which means the degree of intereference of scheduling other nodes, is computed all over the control step of the corresponding node and other depending nodes. In this paper, a new FDS-applied partitioning algorithm is proposed, where partitioning is performed using the defined scheduling urgency and relative scheduling urgency of the nodes. Since the nodes are partitioned by the computation of relative scheduling urgencies only at the earliest control step and the latest control step among the assignable steps, the time complexity for the computation of induced force could be improve. Experimental result on the benchmarks show the improvement of execution time of the proposed algorithm compared to the existing FDS-applied methods.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.3
• /
• pp.209-216
• /
• 2014

The purpose of this study was to explore the effect of 8 weeks after school classes of track sports on students' start motion through kinematic variables. 30 students in D National university of education participated for this study. These students divided into two groups, 17 students for experimental group and 13 students for control group. The two groups participated in general athletic class as common class, and the experimental group participated in after school class additionally. The general class taught track and jump skill for 3 hours a week, and the after school class taught only athletic running skill for 30 minutes a week. Pre and post test assessed to assess students' kinematic changes. Findings indicated that velocity and step rate were increased, and contact time, step length, displacement of center of mass were decreased in the experimental group. In the control group, early velocity, knee/hip angle velocity were increased, and contact time, step length, displacement of center of mass were decreased. In conclusion, the students who only participated in general class, could not maintain athletic skills obtained from the class. However, students who participated in both general and after school class accomplish athletic start skill. This is because Continuous learning effect helped students keep the skill and did not lose the skill. Thus, in order for students to learn specific sport skills, joining after school class with general class together is recommended.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.6
• /
• pp.841-846
• /
• 2014

The present study was conducted to determine whether the two-step time-restricted feeding improves the fattening traits of one-step time-restricted feeding in geese. Thirty-six 8-wk-old geese were allotted into one of three groups. Group R1 (the 1-step restricted feeding group) was allowed access to feed for 2 h in the morning from 8 wk to 14 wk of age. Group R2 (the 2-step restricted feeding group) was treated as Group R1, but was additionally fed for 2 h in the afternoon from 12 wk to 14 wk of age. Group C (the control group) was fed ad libitum from 8 wk to 14 wk of age. Feed intake and body weight (BW) were recorded daily and weekly, respectively. At 14 wk of age, the blood samples were collected to determine the fasting plasma levels of glucose, triacylglycerols and uric acid before sacrifice. The results showed that daily feed intake (DFI) was lower, feed efficiency (FE) was higher in both Groups R1 and R2 than in Group C, and daily gain (DG) in Group R2 was higher than in Group R1 during the whole experimental period (p<0.05). Group R1 exhibited lower abdominal and visceral fat weights in carcass than did Group C (p<0.05), and Group R2 was in intermediate. The fasting plasma glucose levels in Group C were higher, and triacylglycerol levels in Group R1 were higher, compared with the other groups (p<0.05). It is concluded that time-restricted feeding in the fattening period not only increases FE but reduces DFI, and the additional meal during the late fattening period improves the DG without the expense of FE in geese.