• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.87-90
• /
• 2009

A dual-cell-gap transflective liquid crystal display (TR-LCD) with identical response time in the transmissive and reflective regions is demonstrated. In the transmissive region, strong anchoring energy condition is used to decrease the response time, while in the reflective region weak anchoring energy condition is used to increase the response time. The simulated dual-cell-gap TR-LCD has good performances.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권1호
• /
• pp.15-19
• /
• 1997

The characteristics of the response time and the viewing angle on twisted nematic (TN) liquid crystal display (LCD) and amorphous (a)-TN-LCD without rubbing were investigated. To measure the tansmission-voltage, response time, and viewing angle characteristics, we prepared three kinds of LC cells and then studied the surface liquid crystal alignment effect. It was found that the response time on A-TN-LCD was fast compared to the TN-I-CD, and the weak anchoring strength was attributed to the fast response time on a-TN-LCD. Also, we obtained the wide viewing angle characteristics on a-TN-LCD. The liquid crystal alignment of LCD device for electro-optical characteristics is discussed in the present paper.

• Structural Engineering and Mechanics
• /
• 제76권5호
• /
• pp.631-641
• /
• 2020

In the present work, an approach for the multiple time probabilistic characterization of the response of linear structural systems subjected to random non-Gaussian processes is presented. Its fundamental property is working directly on the multiple time probability density functions of the actions and of the response. This avoids of passing through the evaluation of the response statistical moments at multiple time or correlations, reducing the computational effort in a consistent measure. This approach is the extension to the multiple time case of a previously published dynamic Probability Transformation Method (PTM) working on a single evolution of the response statistics. The application to some simple examples has revealed the efficiency of the method, both in terms of computational effort and in terms of accuracy.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 춘계학술발표대회
• /
• pp.625-628
• /
• 2007

갈수록 복잡화, 대량화되고 있는 시스템의 성능은 유지하면서 User Response Time 을 단축시키는 Tuning 은 투자 대비 이익률(ROI : Return On Investment)에 탁월한 효과를 가져온다는 점에서 중요시 되고 있다. 본 연구는 SAP R/3 System 환경에서 Tuning 통한 User Response Time 감소를 위하여 Query 분석 및 Table Index 생성, Program Logic 수정, Parallel Processing, SAP R/3 System 의 고유 기능인 Notes 적용을 통한 User Response Time 감소 기법을 제시한다.

• 대한산업공학회지
• /
• 제19권2호
• /
• pp.53-64
• /
• 1993

Successful completion of a visual task in a predetermined time is very crucial to many operations such as piloting an aircraft. Although existing ergonomic interface models often provide a function of vision tests, it determines only the visibility at any given location. To complement this problem in existing models, the isoresponse time region considering the factors related to visual tasks is presented. Using a multiple regression model, equal response time regions were obtained within which mean response time is expected to be the same and is asymmetrical in shape. Among the factors considered, expectancy significantly decreased response time, and when cued, the effects of field heterogeneity, target uncertainty, density, size contrast and peripheral position on search time were less significant than those in unexpected cases. Response time and error rate, gender and visual acuity were not significantly correlated, and response time and age was positively correlated. These results are expected to be directly applicable to designing various visual tasks in real-life situations.

• 한국자동차공학회논문집
• /
• 제1권3호
• /
• pp.1-11
• /
• 1993

An experimental study was carried out to evaluate the characteristics of transient performance of carburettered gasoline engine under rapid accelerating transient driving conditions. In order to evaluate the characteristics of transient performance quantitatively, the concept of dead time $t_d$ response delay time $t_r$ are introduced. Performance parameters such as air mass fiowrate Gat, engine speed N, manifold boost pressure Pb, and output torque T are measured simultaneously during the rapid opening of the throttle valve by the stepping motor. During the rapid opening of the throttle valve, air mass fiowrate Gat is increased immediately without delay time, but response of engine revolution N, and output torque T are delayed. Therefore hesitation, and stumble phenomena are occurred. Dead time $t_d$ and response delay time $t_r$ of engine revolution N, which is extremely delayed comparing to other performance parameters, are respectively 0.2-0.3sec., 3.0-4.6sec., and dead time rate $t_d/{\Delta}t$ and response delay time rate $t_r/{\Delta}t$ are linearly increased with the throttle valve opening rate ${\theta}$ during the acceleration from 12 degree to 20 degree at 1250rpm.

• 한국전자통신학회논문지
• /
• 제12권4호
• /
• pp.575-584
• /
• 2017

제어시스템의 시간응답을 해석하기 위해 전기회로망을 제안한다. 전달함수와 상태방정식을 이용해 시스템의 시간응답을 계산함으로써 고전제어와 현대제어의 연계성을 분석한다. 상태천이방정식의 복잡한 적분과정을 생략하고, 상태천이행렬과 전달함수의 조합만으로도 시간응답의 해석이 가능함을 제시한다. 단위계단함수와 정현파입력에 따른 전압­전류의 출력응답을 표현하기 위해 프로그램을 코딩하였다. 단위계단입력에서는 과도응답을 해석하였으며, 정현파입력에서는 전압과 전류의 위상차를 해석하였다. 제안된 내용을 과도응답이나 상태공간에 기술함으로써 제어공학의 이해도와 설계능력을 높인다.

• 로봇학회논문지
• /
• 제7권4호
• /
• pp.292-298
• /
• 2012

It is a real-time system that the system correctness depends not only on the correctness of the logical result of the computation but also on the result delivery time. Real-time Operating System (RTOS) is a software that manages the time of a microprocessor to ensure that the most important code runs first so that it is a good building block to design the real-time system. The real-time performance is achieved by using real-time mechanisms through data communication and synchronization of inter-task communication (ITC) between tasks. Therefore, test on the response time of real-time mechanisms is a good measure to predict the performance of real-time systems. This paper aims to analysis the response characteristics of real-time mechanisms in kernel space for real-time embedded Linux: RTAI and Xenomai. The performance evaluations of real-time mechanism depending on the changes of task periods are conducted. Test metrics are jitter of periodic tasks and response time of real-time mechanisms including semaphore, real-time FIFO, Mailbox and Message queue. The periodicity of tasks is relatively consistent for Xenomai but RTAI reveals smaller jitter as an average result. As for real-time mechanisms, semaphore and message transfer mechanism of Xenomai has a superior response to estimate deterministic real-time task execution. But real-time FIFO in RTAI shows faster response. The results are promising to estimate deterministic real-time task execution in implementing real-time systems using real-time embedded Linux.

• 한국인터넷방송통신학회논문지
• /
• 제15권3호
• /
• pp.137-141
• /
• 2015

모바일 클라우드 컴퓨팅은 모바일 기기의 자원 제약적인 문제를 해결하기 위해 클라우드 서비스를 활용한다. 이렇게 모바일 기기에서 수행해야할 작업을 클라우드로 위임하는 것을 오프로딩이라고 하고 에너지 소모의 관점에서 많은 연구들이 진행되고 있다. 본 논문에서는 응답 시간의 관점에서 오프로딩 기법 적용의 효율성을 측정하기 위해 센 싱 데이터 동기화를 고려한 응답 시간 모델을 설계하였다. 제안 모델에서는 클라우드에서 모바일 기기가 요청한 작업 을 처리할 때 필요한 센싱 데이터에 대한 동기화 작업을 고려하여 정교한 응답 시간 예측을 가능하도록 했으며 모의실험을 통해 새로운 센서 데이터의 발생 비율과 동기화 주기가 응답 시간에 어떤 영향을 주는지를 확인하였다.

• 한국정보처리학회논문지
• /
• 제2권5호
• /
• pp.807-813
• /
• 1995

본 논문은 UNIX 시스템의 최적 이용율(Optimal Utilization)을 결정하는 방법을 제시한다. 제시된 방법은 사용자가 인내할 수 있는 응답시간(Tolerable Response Time) 을 제공하는 범위에서 사용자에게 허용될 수 있는 최대 이용율이 최적 이용율이 된다 는 정의(Definition)를 근거로하여 개발되었다. 인내할 수 있는 응답시간이 길어지면 최적 이용율도 높아지므로 최적 이용율은 인내할 수 있는 응답시간의 최대값에서 구해 진다. 인내할 수 있는 응답시간은 서비스 목표(Service Objective) 가 주어지면 도출 해낼 수 있다. 본 논문에서는 인내할 수 있는 응답시간이 0.24초라는 것과 최적 이용 율의 세가지 구성요소는 %wio, %sys, %usr이라는 것을 보여준다. 또한 최적 이용율을 결정하는 실제의 과정을 예시하기 위하여 UNIX 운영체제를 사용하는 IBM 3081 컴퓨터 의 최적 이용율을 구하는 과정을 보여준다.