• 품질경영학회지
• /
• 제42권1호
• /
• pp.33-41
• /
• 2014

Purpose: The purpose of this paper is estimate response quality of three major portal in Korea based on the response time. In addition to response time, the response time by 1Kbyte will be analysed. Methods: Data was collected from July 2010 to November 2013 using Firebug. For comparing averages, ANOVA will be used. For comparing distributions, Chisquare test and Kolmogov-Smirnov test will be used for parametric and non parametric test respectively. Results: For response quality based on response time, Daum gets the first place, Naver the second place, and Nate the third place. But the order of the response time per 1Kbyte is different. The order is Naver, Daum and Nate. Conclusion: The response quality may be estimated using various factors. Response time is the most important factor. Daum provides the shortest response time. We could say Daum provides the best response quality. But Naver provides the shortest response time per 1Kbyte. From these results, we know reducing packets is very important thing in response time.

• 인터넷정보학회논문지
• /
• 제22권3호
• /
• pp.53-58
• /
• 2021

보안관제 분야의 실제 업무활동에 대해서는 거의 연구가 없는 실정이다. 이에 본 논문에서는 보안관제의 위협정보 탐지 대응시간 모델링을 통해 적정 투입인력 규모 산정에 기여하고 최신 보안솔루션 투입시의 효과성 분석 등에 활용할 수 있는 실질적인 연구 방법론을 제시하고자 한다. 보안관제센터에서 수행하는 전체 위협정보 탐지대응시간은 TIDRT(Total Intelligence Detection & Response Time)로 정의한다. 전체 위협정보 탐지 대응시간(TIDRT)는 내부 위협정보 탐지대응시간(IIDRT, Internal Intelligence Detection & Response Time)과 외부 위협정보(EIDRT, External Intelligence Detection & Response Time)의 합으로 구성된다. 내부위협정보 탐지대응시간(IIDRT)는 다섯 단계의 소요시간의 합으로 계산할 수 있다. 본 연구의 궁극적인 목표는 보안관제센터의 주요한 업무활동들을 수식으로 모델링하여 보안관제센터의 사이버 위협정보 탐지대응시간 계산식을 산정하는데 있다. 2장에서는 선행연구를 살펴보고, 3장에서는 전체 위협정보 탐지대응시간의 계산식을 모델링한다. 4장에서 결론으로 끝을 맺는다.

• 대한인간공학회지
• /
• 제32권3호
• /
• pp.217-227
• /
• 2013

Objective: The purpose of this study was to analyze 'response time', 'peak response time' and 'overshoot value' for each muscle by applying the EMG signal to the vehicle response in ISO 7401 and to quantify the response of the driver according to vehicle characteristics by comparing vehicle characteristics and muscle responses of the driver. Background: The Open-loop test defined in international standards ISO 7401 is the only method for evaluating the performance of the vehicle. However, this test was focused only on mechanical responses, not driver's ones. Method: One skilled male driver(22 yrs. experience) was participated in this experiment to measure muscle activities of the driver in transient state. Then the seven muscle signals were applied to calculate 'response time', 'peak response time', and 'overshoot value'. Results: In the analyses of the EMG data, the effects of vehicle type and muscle were statistically significant on the 'response time' and 'peak response time'. Also, the effects of vehicle type, muscle, and lateral acceleration level were statistically significant on the 'overshoot value' in this study. According to the analyses of the vehicle motion data, vehicle motion variable(LatAcc, Roll, YawVel) was statistically significant on the 'response time' and vehicle type, vehicle motion variable, and lateral acceleration level were statistically significant on the 'peak response time', respectively. Conclusion: In the analyses of the 'response time' and 'overshoot value', the data of muscle activities(EMGs) was better index that could evaluate the vehicle characteristic and performance than the data of vehicle motion. In case of peak response time, both EMG and vehicle motion data were good index. Application: The EMGs data from a driver might be applicable as index for evaluation of various vehicle performances based on this study.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.831-839
• /
• 2016

Seismic qualification by test is widely used as a way to show the integrity and functionality of equipment that is related to the overall safety of nuclear power plants. Another means of seismic qualification is by direct integration analysis. Both approaches require a series of time histories as an input. However, in most cases, the possibility of using real earthquake data is limited. Thus, artificial time histories are widely used instead. In many cases, however, response spectra are given. Thus, most of the artificial time histories are generated from the given response spectra. Obtaining the response spectrum from a given time history is straightforward. However, the procedure for generating artificial time histories from a given response spectrum is difficult and complex to understand. Thus, this paper presents a simple time-domain method for generating a time history from a given response spectrum; the method was shown to satisfy conditions derived from nuclear regulatory guidance.

• 한국산업융합학회 논문집
• /
• 제5권1호
• /
• pp.21-26
• /
• 2002

Response time of actuator in a hydraulic system may be important and necessary to avoid failures and to improve the efficiency of operation. Flow restricting devices can result in a decrease in the peak pressure, but may change the response time. The response time has an important effect on both operator and operator perceived smoothness. The response time should correspond to how fast a system responds to a given disturbance at the system boundary, Occasionally the appropriate response time is not easily determined. This study is on the characteristics of response time in the hydraulic system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.597-603
• /
• 2001

Control of pressure transients in a hydraulic system may be important and necessary to avoid failures and to improve the efficiency of operation. Flow restricting devices can result in a decrease in the peak pressure, but may change the response time. The response time has an important effect on both operator and operator perceived smoothness. The response time should correspond to how fast a system responds to a given disturbance at the system boundary. Occasionally the appropriate response time is not easily determined. This study is on the response time characteristics in the hydraulic system studied for the control of response time.

• 대한기계학회논문집B
• /
• 제26권11호
• /
• pp.1488-1495
• /
• 2002

The response time represents how fast a system responds to a given disturbance at the system boundary. Flow restricting devices for controlling transients can result in a decrease in the peakm pressure, but may change response time. Response lag in a hydraulic system leads to inefficient working cycle and operator discomfort. The experiments were conducted in order to get information on the parameters which exert appreciable influence on the response time. The experimental apparatu including a hydraulic actuator, orifice and a hydraulic pump was an idealization of a bucket hydraulic shifting system. Experimental results show that the response time depends on operating pressure and flow rate. The effects of orifice type and size on the response time are quantified.

• 제어로봇시스템학회논문지
• /
• 제19권3호
• /
• pp.195-201
• /
• 2013

In this paper, we present optimization technique for the response time of DVR (Dynamic Voltage Restorer) and the possible compensation range of voltage dip by the DVR system. To protect 3-phase phase-controlled rectifier from voltage dip, DVR system needs to have optimum response time as an important design factor. Although the fast response time of DVR ensures wider range of voltage dip, DVR controller has so high cost and poor stability. This paper proposes DVR system with optimum response time required for certain intensity of voltage dips and good stability to support possible compensation range of voltage dip. Proposed technique showed optimum response time and good stability for overall system. We believe that proposed technique is reliable and useful in DVR design.

• 한국전기전자재료학회논문지
• /
• 제22권1호
• /
• pp.93-97
• /
• 2009

We analyzed voltage characteristics of toner particle type display according to particle layers and cell gap between two electrodes and ascertained the aging effects by measuring the response time of particles with and without aging process. The threshold/driving/breakdown voltage is proportional to layers of toner particles and cell gap and the response time at driving voltage is faster than that of threshold and breakdown voltage because of different q/m of color and black particles. The analysis of response time is a method of estimation of optical characteristics, driving voltage and particle lumping and these results are promoted by aging process. We use the laser and photodiode to measure response time and optical properties. It has not been studied and reported to analyze the relationship of response time, threshold/driving/breakdown voltage, lumping phenomena, cell gap, and aging process for toner particle type display.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.974-978
• /
• 1991

Electro-pneumatic valve is an electro-mechanical device which converts electric signal into pneumatic flow mu or pressure. A measurement of dynamic response time is very important to evaluate valve performance. Dynamic response time of electro-pneumatic valve has a variation accordance with valve types, operating way and test standard. In this study, automatic measurement system of dynamic response time is composed based on test condition of dynamic response time test standard(CETOP, JIS). Also, in this study test pressure variation characteristics accordance with variation of solenoid excitation power, and we developed dynamic response measurement system enable to compare of and analyze these two characteristics.