• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.541-549
• /
• 2020

The Drug Delivery System (DDS) is defined as a technology for designing existing or new drug formulations and optimizing drug treatment. DDS is designed to efficiently deliver drugs for the care of diseases, minimize the side effects of drug, and maximize drug efficacy. In this study, the optimization of tripolyphosphate (TPP) concentration on the size of Chitosan nanoparticles (CNPs) produced by crosslinking with chitosan was measured. In addition, the characteristics of Fe₃O₄-CNPs according to the amount of iron oxide (Fe₃O₄) were measured, and it was confirmed that the higher the amount of Fe₃O₄, the better the characteristics as a magnetic drug carrier were displayed. Through the ninhydrin reaction, a calibration curve was obtained according to the concentration of γ-aminobutyric acid (GABA) of Y = 0.00373exp(179.729X)-0.0114 (R² = 0.989) in the low concentration (0.004 to 0.02 wt%) and Y = 21.680X-0.290 (R² = 0.999) in the high concentration (0.02 to 0.1 wt%). Absorption was constant at about 62.5% above 0.04 g of initial GABA. In addition, the amount of GABA released from GABA-Fe₃O₄-CNPs over time was measured to confirm that drug release was terminated after about 24 hr. Finally, GABA-Fe₃O₄-CNPs performed under the optimal conditions were spherical particles of about 150 nm, and it was confirmed that the properties of the particles appear well, indicating that GABA-Fe₃O₄-CNPs were suitable as drug carriers.

• The KIPS Transactions:PartC
• /
• v.18C no.5
• /
• pp.343-360
• /
• 2011

The objective of this paper is to analyze and characterize to simulate routing observations on end-to-end routing circuits and a ping experiment of a virtual network after modeling, such as IPv6 migration, an OSPFv3 routing experiment based on an IPv6 environment, and a ping experiment for IPv4/IPv6 dual-stack networks and IPv6 network for OSPFv3 routing using IPv6 planning and operations in an OPNET Modeler. IPv6 deployment based largely on the integrated wired and wireless network was one of the research tasks at hand. The previous studies' researchers recommended that future research work be done on the explicit features of both OSPFv3 and EIGRP protocols in the IPv4/IPv6 environment, and more research should be done to explore how to improve the end-to-end IPv6 performance. Also, most related work was performed with an IPv4 environment but lacked studies related to the OSPFv3 virtual network based on an end-to-end IPv6 environment. Hence, this research continues work in previous studies in analyzing IPv6 migration, an OSPFv3 routing experiment based on IPv6, and a ping experiment for IPv4/IPv6 dual-stack networks and IPv6 network for OSPFv3 routing. In the not too distant future, before enabling the default IPv6, it would help to understand network design and deployment based on an IPv6 environment through IPv6 planning and operations for the end-user perspective such as success or failure of connection on IPv6 migration, exploration of an OSPFv3 routing circuit based on an end-to-end IPv6 environment, and a ping experiment for IPv4/IPv6 dual-stack networks and IPv6 network for OSPFv3 routing. We were able to observe an optimal route for modeling of an end-to-end virtual network through simulation results as well as find what appeared to be a fast ping response time VC server to ensure Internet quality of service better than an HTTP server.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.61-68
• /
• 2017

The key quality attributes of the pressed powder, one of base makeup products, are skin-affinity and spreadability. In general, there was a limit to meet skin-affinity and spreadability simultaneously, which are opposite attributes each other. In this study, air jet mill process was tried to satisfy two main properties. Skin-affinity was improved by a wet coating of sericite with a mixture of lauroyl lysine (LL) and sodium cocoyl glutamate (SCG). The application of mono-dispersed polymethyl methacrylate (PMMA) and diphenyl dimethicone/vinyl diphenyl dimethicone/silsesquioxane crosspolymer (DDVDDSC) improved both qualities. Air jet mill process has been mainly applied in the pharmaceutical and food industries, and is a method used for processing powder materials in cosmetic field. In this study, we were able to complete makeup cosmetics with an optimum particle size $6.8{\mu}m$ by combining the air jet mill process at the manufacturing stage. It was confirmed that the Ti element was uniformly distributed throughout the cosmetics by EDS mapping, and that the corners of the tabular grains were rounded by SEM analysis. It is considered that this can provide an effect of improving the spreadability when the cosmetic is applied to the skin by using a makeup tool. LL with excellent skin compatibility and SCG derived from coconut with little skin irritation were wet coated to further enhance the adhesion of sericite. SEM images were analyzed to evaluate effect of the dispersion and uniformity of PMMA on spreadability. With the spherical shapes of similar size, it was found that the spreading effect was further increased when the distribution was homogeneously mono-dispersed. The dispersion and spreadability of PMMA were confirmed by measuring the kinetic friction and optimal content was determined. The silicone rubber powder, DDVDDSC, was confirmed by evaluating the hardness, spreading value, and drop test. Finally, it was found that the dispersion of PMMA and silicone rubber powder affected spreadability. Such makeup cosmetics have excellent stability in drop test while having appropriate hardness, and good stability over time. Taken together, it is concluded that air jet mill process can be utilized as a method to improve skin-affinity and spreadability of the pressed powder.

• Korean Journal of Weed Science
• /
• v.6 no.1
• /
• pp.25-32
• /
• 1986

This experiment was conducted to evaluate effect of various hormones on callus induction, and on plantlet formation on various media, and to detect of Londax [Methyl 2-[[[[[(4,6-dimethoxy pyrimidin-2-yl) amino] carbonyl] amono] sulfonyl) methyl] benzoate] and Basta[Ammonium-(3-amino-3-carboxy-propyl)-methyl phosphinate] on callus growth and reaction of succinate dehydrogenase in callus against TTC, using various species such as Eleocharis kuroguwai, Cyperus serotinus, Oryza sativa (samgangbyeo) and Echinochloa crusgalli P. Beauv. var. caudata Kitagawa. The optimal levels of 2,4-D in MS medium seems to be different among species tested, 2.0 ppm for rice and E. crusgalli, 1.0 ppm for Eleocharis kuroguwai, and 4.0 ppm for C. serotinus derived callus from shoot-tip. In case of combination of 2,4-D with BA, 1.0 plus 0.3 ppm appeared the most appropriate level to induce callus from rice and E. kuroguwai, and I.0 plus 0.1 ppm for C. serotinus and E. crusgalli. When 2,4-D treated with TIBA, 1.0 plus 0.5 ppm appeared the most appropriate rates to induce callus derived from seeds of rice, E. crusgalli, seeds of C. serotinus and E. kuroguwai, 1.0 plus 0.3 ppm for shoot-tip of C. serotinus. Positive reaction of succinate dehydrogenase against TTC was observed regardless of calli and herbicides tested, indicating that they all are alive, and these herbicides were not able to kill the calli tested within the short period of time 20 hrs treatment. Regardless of plant species used, the rate of plantlet formation from callus was very low. However, some plantlet formed from E. crusgalli at 0.8 ppm of 2,4-D plus 8.0 ppm of kinetin, and from E. kuroguwai at 1.6 ppm of 2,4-D plus 16.0 ppm of kinetin, showing effectiveness of 2,4-D with kinetin mixture treatment. No callus was induced from C. serotinus treated with Basta from $10^{-6}M$ to $10^{-3}M$. In general, rice was the least susceptible to Basta among plant species tested, followed by E. crusgalli, and E. kuroguwai. In Londax treatment, rice showed the least inhibition rate in callus growth. Callus was induced from rice even at $10^{-3}M$ of Londax. However, $10^{-3}M$ of Londax completely inhibited callus induction from the test species. Rice showed most tolerant to both herbicides, indicating the existence of different responses among plant species.

• Journal of Aquaculture
• /
• v.11 no.2
• /
• pp.213-221
• /
• 1998

The effects of differen concentrations of Obosan as a feed additive dietary herb were examined on survival rate, growth, feed conversion ration and condition factor in olive flounder (paralichthys olivaceus). Effectiveness of dietary Obosan with optimized concentration for 48 weeks were also observed with regard to growth performances and yields. All groups fed diets containing 0.15, 0.3 and 0.6% of Obosan revealed significantly higher survival rate than control group (P<0.05). Growth, feed conversion ratio and condition factor of olive flounder fed diets containing Obosan were considerably improved when compared to those of controls (P<0.05). The 0.3% of dietary Obosan was proven to be the optimal concentration in all parameters tested. The dietary Obosan (0.3%) for 48 weeks showed significantly higher surval rate than control (P<0.05), and also improved yields in weight gain (19.0% improvement), specific growth rate (4.8%), feed conversion ratio(13.6%) and condition factor (10.8%), significantly (P<0.05).

• Journal of Gastric Cancer
• /
• v.8 no.3
• /
• pp.154-159
• /
• 2008

Purpose: Although most surgeons generally administer prophylactic antibiotics for more than three days, the optimal duration of antimicrobial prophylaxis in elective gastric surgery is still open to debate. The aim of this study was to determine if the duration of prophylactic antibiotic use can affect the recovery of patients after elective gastric surgery. Materials and Methods: A total of 93 patients with gastric cancer were enrolled in this study, between January 2007 and December 2007. Patients were excluded if they had an infection at the time of surgery or they underwent an emergency operation. The first antibiotics were commonly given from just prior to the operation. The patients were divided into three groups according to the operation periods: those who received antibiotics only on the day of operation (arm A), those who received antibiotics for up to 3 days (arm B), and those who received antibiotics for more than 5 days postoperatively (arm C). The antibiotic that was used was second generation cephalosporin. Results: The rate of surgical site infection was 12.9% (n=4) in arm A, 16.1% (n=5) in arm B and 19.4% (n=6) in arm C, respectively (P=0.788). No relationship was observed between the duration of prophylaxis and the rate of fever or the neutrophil counts during postoperative 7 days (P=0.119, P=0.855). Conclusion: The prophylactic effect of antibiotics on recovery, with the antibiotics being received only on the day of the operation, is as effective as receiving antibiotics for a longer duration after gastric cancer surgery.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1619-1625
• /
• 2012

The purpose of this study is to determine long-term storage conditions for winter kimchi. Kimchi was stored in a kimchi refrigerator for 6 months with or without fermentation. Four different temperature systems used were as follows: 5 days at $10^{\circ}C$ followed by storage at $-2.5^{\circ}C$ (F1), 1 day at $15^{\circ}C$ followed by storage at $-2.5^{\circ}C$ (F2), storage at $-1^{\circ}C$ (S1), or at $-2.5^{\circ}C$ (S2). Time periods required for F1, F2, S1, or S2 kimchi to reach pH 4.4 and acidity 0.6% were 2, 8, 12, and 22 weeks, respectively. Lactobacillus spp. growth on F1 and F2 kimchi was faster and greater than that on S1 and S2 kimchi, revealing a maximum concentration of 8~9 verses 6.8 log CFU/mL, respectively. However, Leuconostoc spp. were fully grown (8~9 log CFU/mL) on all four kimchi samples regardless of temperature, even at $-2.5^{\circ}C$, although the times required to reach maximum growth were different. Growth of Lactobacillus and Leuconostoc spp. both decreased after reaching maximum levels, except for F1 kimchi. Sensory evaluation results for 3 month storage showed that F1 kimchi was the best among kimchi samples in terms of appearance, acidic taste, carbonated taste, crispiness, and moldy smell. For 6 months of storage, F1 and S1 kimchi were the most highly evaluated among the kimchi samples. Sensory evaluation result for S1 kimchi stored at $-1^{\circ}C$ was comparable to that of F1 kimchi due to fully grown Leuconostoc spp. Acidities of F1 and S1 kimchi after 6 months of storage were 0.8 and 0.7%, respectively. Taken together, fermentation of kimchi at $10^{\circ}C$ for 5 days followed by storage at $-2.5^{\circ}C$ for 6 months was optimal for high quality kimchi. Sensory properties of winter kimchi were significantly influenced by the degree of fermentation.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.551-557
• /
• 2013

In the present study, pristine carbon nanotube (p-CNT) and thiolated carbon naotube (t-CNT) electrodes were investigated to improve their detectabilities for cadmium (Cd) and lead (Pb). In addition, we evaluate which reaction mechanism is used when the electrolyte contains both Cd and Pb metals. Square wave stripping was employed for analyzing the sensitivity for the metals. A frequency of 30 Hz, a deposition potential of -1.2 V vs. Ag/AgCl and a deposition time of 300 s were used as optimal SWSV parameters. t-CNT electrodes show the better sensitivity for both Cd and Pb metals than that of p-CNT electrodes. In case of Cd, sensitivities of p-CNT and t-CNT electrodes were $3.1{\mu}A/{\mu}M$ and $4.6{\mu}A/{\mu}M$, respectively, while the sensitivities for Pb were $6.5{\mu}A/{\mu}M$ (p-CNT) and $9.9{\mu}A/{\mu}M$ (t-CNT), respectively. The better sensitivity of p-CNT electrodes is due to the enhancement in the reaction rate of metal ions that are facilitated by thiol groups attached on the surface of CNT. When sensitivity was measured for the detection of Cd and Pb metals present simultaneously in the electrolyte, Pb indicates better sensitivity than Cd irrespective of electrode types. It is ascribed to the low standard electrode potential of Pb, which then promotes the possibility of oxidation reaction of the Pb metal ions. In turn, the Pb metal ions are deposited on the electrode surface faster than that of Cd metal ions and cover the electrode surface during deposition step, and thus Pb metals that cover the large portion of the surface are more easily stripped than that of Cd metals during stripping step.

• Korean Journal of Environment and Ecology
• /
• v.18 no.4
• /
• pp.369-381
• /
• 2004

This study was achieved to present the way to restore the Seonheulgot pasture-grassland damaged by landuse and interference for a long time to evergreen broad-leaved forests as the native vegetation structure. As a result of analyzing ecological succession tendency of structure in survey area, we established the optimal restoration model. The total of survey sites were 26, and the classified plant community types were four types by M.I.P of dominant woody species. Finally we classified the four types based on diameter of dominant woody species in canopy layer. The six community types are as follows: Community I was runner-shrub forest, community II was evergreen broad-leaved shrub forest, and community III was evergreen broad-leaved forest of small diameter. Community IV and V were evergreen broad-leaved forest of middle diameter. Community Ⅵ was evergreen broad-leaved forest of large diameter. The number of constituent species was 24 in community I, 28 in community II as the shrub forest, 16 as the evergreen broad-leaved forest of small diameter, 29 in community III, 30 in community IV as the evergreen broad-leaved forest of middle diameter and 27 in community Ⅵ as the evergreen broad-leaved forest of large diameter. The range of Shannon's index of all communitys was from 0.8763 to 1.2630 and the Similarity index between the community composed of middle diameter woody species and large diameter woody species. The ecological succession of community I, II, and III were changed from pasture-grassland to broad-leaved forest and the structure of community IV, V, and Ⅵ was similar to evergreen broad-leaved forest in warm temperate region. We suggest the restoration planting model evergreen broad-leaved forest of in Seonheulgot pasture-grassland, as follows: The target restoration vegetation were Castanopsis cuspidata var. sievoldii community and Queycus glauca community. Castanopsis cuspidata var. sievoldii and Quercus glauca should be dominant woody species in canopy layer, the number of trees was 10 per 100$m^2$, and Castanopsis cuspidata var, sievoldii, Quercus glauca, Camellia japonica, and Eurya japonica should be dominant woody species in the understory layer, the number of trees was 14 per 100$m^2$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.7-14
• /
• 2009

In this paper, the effects of annealing conditions on the structural ((002) intensity, FWHM, d-spacing, grain size, (002) peak position), optical (UV peak, UV peak position) and electrical properties (carrier concentrations, resistivity, mobility) of ZnO films were investigated. ZnO films were deposited onto SiO$_2$/si substrates by RF magnetron sputtering from a ZnO target. The substrate was not heated during deposition. ZnO films were annealed in temperature ranges of $500\sim650^{\circ}C$ in the O$_2$ flow for 5$\sim$20 min. The film average thicknesses were in the range of 291 nm. The surface morphologies and structures of the samples were characterize by SEM and XRD, respectively. The optical properties were evaluated by photoluminescence (PL) measurement at room temperature (RT) using a He-Cd 325 nm laser. As the annealing temperature and time vary, the following relations were also observed: (1) proportional relationships among UV intensity (002) intensity, and grain size exist, (2) UV intensity is inversely proportional to FWHM, (3) there is no special relationship between UV intensity and electron carrier concentrations, (4) d-spacing is inversely proportional to (002) peak position, (5) UV peak position in the range of 3.20$\sim$3.24 eV means that ZnO films have a n-type conductivity which was consistent with that obtained from the electrical property, (6) the optimal conditions for the best optical and structural characteristics were found to be oxygen fraction, (O$_2$/(O$_2$+Ar)) of 0.2, RF power of 240W, substrate temperature of RT, annealing condition of 600$^{\circ}C$ for 20 min, and sputtering pressure of 20 mTorr.