• 펄프종이기술
• /
• 제36권3호
• /
• pp.60-66
• /
• 2004

The effects of roll diameter, winding time, winding methods and relative humidity on curl In newsprints(46$g/m^2$, 54 $g/m^2$, and 54 $g/m^2$ SNC) are examined. The larger MD curl appears at smaller roll diameter, with the extension of winding time, and at the treat ment of soft nip calendering. The MD curl shows the back side curl at winding methods with top side as outer side(TSO), and the top side curl with top side as inner side(TSI). While the CD curl in newsprints( 46 $g/m^2$, and 54 $g/m^2$ SNC) treated with calender is hardly influenced by the storage times, roll diameter, and winding methods. However the CD curl in newsprint(54 $g/m^2$) gradually increases to a two weeks, and then hold constant regardless of roll diameter and winding methods.. The CD curl shows always the top side curl regardless of winding methods. At high relative humidity, the CD curl largely reduces, but the MD curl is not nearly changed. Especially, the CD curl in news-prints(54 $g/m^2$ SNC) is little affected by the changes of relative humidity.

• Journal of Information Technology Applications and Management
• /
• 제11권1호
• /
• pp.189-200
• /
• 2004

Recently Flash Memory which is small and low-powered is widely used as a storage of embedded system, because an embedded system requests portability and a fast response. To resolve a difference of access time between a storage and RAM, Linux is using disk caching which copies a part of file on disk into RAM. It is not also an exception on embedded system. A READ access-time of flash memory is similar to RAMs. So, when a process on an embedded system reads data, it is similar to the time to access cached data in RAM and to access directly data on a flash memory. On the embedded system using limited memory, using a disk cache is that wastes much time and memory spaces to manage it and can not reflects the characteristic of a flash memory. This paper proposes the regular file access of limited using a page cache in the file system based on a flash memory and reflects the characteristic of a flash memory. The proposed algorithm minimizes power consumption because access numbers of the RAM are reduced and doesn't waste a memory space because it accesses directly to a flash memory Therefore, the performance improvement of the system applying the proposed algorithm is expected.

• 대한안전경영과학회지
• /
• 제6권3호
• /
• pp.141-152
• /
• 2004

Supply chains for agricultural commodities with their various constraints such as production lead time, seasonal production, and methods of storage are limited in the extent to which techniques like Just-in-Time (JIT) inventory management can be applied. It is beyond the ability of producers to control harvest time and many agricultural products are perishable so that they can incur exceptional losses in storage if they are not handled correctly. This is a source of additional costs and inefficiency in supply chain management. The purpose of this study is to reduce or eliminate such sources of loss and inefficiency and to identify success factors for the JIT inventory management system where it can be applied for agricultural products. Where JIT techniques can be applied in supply chain management for agricultural products, costs such as transportation, inventory, and storage losses can be reduced with concurrent increases in efficiency. In the paper, some of the problems associated with applying JIT inventory control methods in supply chain management for agricultural commodities will be reported through a series of case studies.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 춘계학술대회
• /
• pp.191-201
• /
• 2004

Supply chains for agricultural commodities with their various constraints such as production lead time, seasonal production, and methods of storage are limited in the extent to which techniques like Just-in-Time (JIT) inventory management can be applied. It is beyond the ability of producers to control harvest time and many agricultural products are perishable so that they can incur exceptional losses in storage if they are not handled correctly. This is a source of additional costs and inefficiency in supply chain management. The purpose of this study is to reduce or eliminate such sources of loss and inefficiency and to identify success factors for the JIT inventory management system where it can be applied for agricultural products. Where ]IT techniques can be applied in supply chain management for agricultural products, costs such as transportation, inventory, and storage losses can be reduced with concurrent increases in efficiency. In the paper, some of the problems associated with applying ]IT inventory control methods in supply chain management for agricultural commodities will be reported through a series of case studies.

• 한국항해항만학회지
• /
• 제45권3호
• /
• pp.148-154
• /
• 2021

컨테이너터미널 운영에서 안벽영역의 장비와 기술이 발전함에 따라 항만운영의 정체가 장치장으로 이전되었다. 따라서 장치장 관리가 터미널 운영 전반에 미치는 영향이 매우 커졌다. 이에 따라 컨테이너터미널 장치장 운영의 최적화를 위한 연구가 많이 수행되었으나 장래 장치장 점유율 변화 자체를 추정한 연구는 없는 실정이다. 본 연구는 부산항 신항을 대상으로 시간의 경과에 따른 확률의 변화를 설명하는 마코프 체인을 적용하여 부산항 신항 컨테이너 터미널의 장치장 점유율 수준에 대한 확률을 분석하였다. 분석결과 부산항 신항의 장치장 점유율은 향후에도 높은 수준을 유지할 확률이 큰 것으로 나타났다.

• KIEAE Journal
• /
• 제15권3호
• /
• pp.57-63
• /
• 2015

Purpose: Ground source heat pump system has been attracted in the horticulture industry for the reduction of energy costs and the increasing of farm income. Even though it has higher initial costs, if it uses in combination with heat storage, it is able to reduce the initial costs and operate efficiently. In order to have significant effect of heat storage type ground source heat pump system, it is required to design the capacity considering various conditions such as energy load pattern and operating schedule. Method: In this study, we have designed heat storage type ground source heat pump system in 5 cases by the operating schedule, and examined the system to find the most economic and having superb performance regarding the system COP(Coefficient of Performance) and energy consumption, using dynamic energy simulation, TRNSYS 17. Result: Conventional ground source heat pump system has lower energy consumption than heat storage type, but following the result of LCC(Life Cycle Cost) analysis, the heat storage type was more economic due to the initial costs. In addition, it has the most efficient performance and energy costs in the case of the smallest heat storage time.

• 상하수도학회지
• /
• 제21권1호
• /
• pp.131-138
• /
• 2007

A rainwater utilization facility consists of its catchment area, treatment facility, storage tank, supply facility and pipes in general. The rainwater storage tank which occupies the largest area of the facility has been usually considered quantitatively for determining the storage capacity. Hence, there is little information on water quality improvement by sedimentation in a rainwater storage tank in operation. In this study, we measured the rainwater quality in a rainwater storage tank in operation during late spring and summer, and showed water quality improvement of turbidity removal of 25~46% by sedimentation in a rainwater storage tank under a fixed water level without inflow and outflow after runoff ceased. It is necessary to have a considerable distance between the inlet and outlet of the tank and, if possible, it is recommended that the design should allow for an effective water depth of over 3 m and supply rainwater near the water surface. The operation method which increases the retention time by stopping rainwater supply for insuring low turbidity is recommended when the turbidity of rainwater runoff is high. And also more efficient operation and maintenance of the rainwater utilization facility is expected through the tailored design and operation of the facility considering particle removal and behavior.

• 한국포장학회지
• /
• 제5권1호
• /
• pp.25-29
• /
• 1999

이미 개발이 완료됐거나 개발 중인 인디케이터 3가지를 이용하여 다양한 온도에서의 색 변화 여부 및 정도를 측정하였다. 각각의 인디케이터는 다른 반응 기작 및 화학 물질을 사용하고 있어, 색 변화에 필요한 활성화 에너지 값 및 반응 속도에 차이가 있었다. 이러한 특징은 내용물의 저장 및 유통 조건에 맞는 적절한 인디케이터를 이용하여 원하는 결과를 얻을 수 있다는 사실을 알게 되었다. 즉 제품의 주된 저장조건이 냉동인지 아니면 냉장인지 그리고 제품의 품질 변화 속도를 고려하여 각기 다른 인디케이터를 사용하면 내용물의 실제 저장 기간과 색 변화와의 상관관계 효과를 높일 수 있다. 또한 저장 및 유통 시 온도의 변화가 수반됨으로서 온도의 지속적인 변화에 다른 색 변화 가능성을 연구할 필요가 있으며 이와 아울러 실제 식품에 부착하여 내용물의 상태와 색 변화를 연관시키는 연구가 필요할 것으로 생각된다.

• Journal of Biosystems Engineering
• /
• 제37권6호
• /
• pp.398-403
• /
• 2012

Purpose: Green soybeans (edamame) are now an economically important and popular food product in Japan. In order to shorten breeding time and to decide an optimal harvest time, we have been developing a dedicated NIRT spectrometer since 2004 for the determination of constituent content such as sucrose and free amino acids, which are two major contributors to the eating quality, in a single pod green soybean. Methods: The obtained models showed that the developed NIRT instrument had reasonable accuracy for the determination of these two components. Then we carried out the investigation into the change in two components during a few days storage using these models with changing time, variety/cultivar, packaging and temperature. Results: The result showed that the most affecting factor on decreasing both sucrose content and free amino acids was variety/cultivar. The time, packaging and temperature also affected significantly in most cases.

• Nuclear Engineering and Technology
• /
• 제45권1호
• /
• pp.115-124
• /
• 2013

Among the several options to solve PWR spent fuel accumulation problem in Korea, the dry storage method could be the most realistic and applicable solution in the near future. As the basic objectives of dry storage are to prevent a gross rupture of spent fuel during operation and to keep its retrievability until transportation, at the same time the importance of a spent fuel integrity evaluation that can estimate its condition at the final stage of dry storage is very high. According to the national need and technology progress, two representative nations of spent fuel dry storage, the USA and Japan, have established different system temperature criteria, which is the only controllable factor in a dry storage system. However, there are no technical criteria for this evaluation in Korea yet, it is necessary to review the previously well-organized methodologies of advanced countries and to set up our own domestic evaluation direction due to the nation's need for dry storage. To satisfy this necessity, building a domestic spent fuel test database should be the first step. Based on those data, it is highly recommended to compare domestic data range with foreign results, to build our own criteria, and to expand on evaluation work into recently issued integrity problems by using a comprehensive integrity evaluation code.