• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.41
• /
• pp.103-112
• /
• 1997

In this paper, a nonhierarchial integrated information network with circuit switched and packet switched traffic is considered. It is assumed that circuit switched traffic is allowed to attempt an alternate path if the direct path is blocked, whereas packet switched traffic is not. The network uses a movable boundary scheme to allocate bandwidth dynamically. To analyze the performance of this type of network, EEBP(End to End Blocking Probability) is selected as a measure for circuit switched traffic and average time delay for packet switched traffic, respectively. EEBP and average time delay are derived analytically. Using the two proposed measure, the performance of the network under various bandwidth allocations and arrival patterns are observed. Moreover, the arrival rate of one link for circuit switched traffic is obtained from an approximation formula. Simulation results reveal the validity of the proposed approximation method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.522-527
• /
• 2005

We need a transmission of high quality and capacity according to a fast supply of mobile communication terminal. As multipath fading occured in high speed transmission, adaptive array antenna habe been studied to solve such a demand. DOA(Direction of Arrival) estimation play a important .ole in adaptive a..ay antenna. This paper present a space time blind identification using second order statistics and present blind space time adaptive array antenna. Also we verified a effect of the presented method.

• Smart Structures and Systems
• /
• v.24 no.2
• /
• pp.173-182
• /
• 2019

Due to the degradation of beamforming properties at angles close to $0^{\circ}$ to $180^{\circ}$, linear array does not have a complete $180^{\circ}$ inspection range but a smaller one. This paper develops a improved sensor array with two additional sensors above and below the linear sensor array, and presents time difference and two dimensional multiple signal classification (2D-MUSIC) based impact localization for omni-directional localization on composite structures. Firstly, the arrival times of impact signal observed by two additional sensors are determined using the wavelet transform and compared, and the direction range of impact source can be decided in general, $0^{\circ}$ to $180^{\circ}$ or $180^{\circ}$ to $360^{\circ}$. And then, 2D-MUSIC based spatial spectrum formula using uniform linear array is applied for locate accurate position of impact source. When the arrival time of impact signal observed by two additional sensors is equal, the direction of impact source can be located at $0^{\circ}$ or $180^{\circ}$ by comparing the first and last sensor of linear array. And then the distance is estimated by time difference algorithm. To verify the proposed approach, it is applied to a quasi-isotropic epoxy laminate plate and a stiffened composite panel. The results are in good agreement with the actual impact occurring position.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.370-378
• /
• 2007

In wireless sensor networks (WSNs), thousands of sensors are often deployed in a hostile environment. In such an environment, WSNs can be applied to various applications by using the absolute or relative location information of the sensors. Until now, the time-of-arrival (TOA) based localization method has been considered most accurate. In the TOA method, however, inaccuracy in distance estimation is caused by clock drift and clock skew between sensor nodes. To solve this problem, several numbers of periodic time synchronization methods were suggested while these methods introduced overheads to the packet traffic. In this paper, we propose a new localization method based on multiple round-trip times (RTOA) of a signal which gives more accurate distance and location estimation even in the presence of clock skew between sensor nodes. Our experimental results show that the Proposed RTOA method gives up to 93% more accurate location estimation.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.35-38
• /
• 2004

In this paper, we investigate and analyze the problems encountered in frame-based estimation of TDOA(Time Difference of Arrival) using CPSP function. Spectral leakage occurring in framing of a speech signal by a rectangular window makes estimation of CPSP spectrum inaccurate. Framing with a Hamming window to reduce the spectral leakage effect distorts the signal due to the different weighting at temporally same sample, which make the TDOA estimation using CPSP function inaccurate. In this paper, we solve this problem by reducing the dynamic range of the spectrum of a speech signal with preemphasis. Experimental results confirm that the framing of pre-emphasized microphone output with a rectangular window shows higher success ratio of TDOA estimation than any other framing methods.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.7
• /
• pp.710-718
• /
• 2009

The time difference of arrival(TDOA) algorithm is being used widely for identifying the location of a source emanating either electrical or acoustic signal. It's application areas will not be limited to identifying the source at a fixed location, for example the origin of an earthquake, but will also include the trajectory monitoring for a moving source equipped with a GPS sensor. Most of the TDOA algorithm uses time correlation technique to find the time delay between received signals, and therefore difficult to be used for identifying the location of multiple sources. In this paper a TDOA algorithm based on cross-spectrum is developed to find the trajectory of two sound sources with different frequencies. Although its application is limited to for the sources on a disk plane, it can be applied for identifying the locations of more than two sources simultaneously.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.315-330
• /
• 2017

Halo coronal mass ejections (CMEs) originating from solar activities give rise to geomagnetic storms when they reach the Earth. Variations in the geomagnetic field during a geomagnetic storm can damage satellites, communication systems, electrical power grids, and power systems, and induce currents. Therefore, automated techniques for detecting and analyzing halo CMEs have been eliciting increasing attention for the monitoring and prediction of the space weather environment. In this study, we developed an algorithm to sense and detect halo CMEs using large angle and spectrometric coronagraph (LASCO) C3 coronagraph images from the solar and heliospheric observatory (SOHO) satellite. In addition, we developed an image processing technique to derive the morphological and dynamical characteristics of halo CMEs, namely, the source location, width, actual CME speed, and arrival time at a 21.5 solar radius. The proposed halo CME automatic analysis model was validated using a model of the past three halo CME events. As a result, a solar event that occurred at 03:38 UT on Mar. 23, 2014 was predicted to arrive at Earth at 23:00 UT on Mar. 25, whereas the actual arrival time was at 04:30 UT on Mar. 26, which is a difference of 5 hr and 30 min. In addition, a solar event that occurred at 12:55 UT on Apr. 18, 2014 was estimated to arrive at Earth at 16:00 UT on Apr. 20, which is 4 hr ahead of the actual arrival time of 20:00 UT on the same day. However, the estimation error was reduced significantly compared to the ENLIL model. As a further study, the model will be applied to many more events for validation and testing, and after such tests are completed, on-line service will be provided at the Korean Space Weather Center to detect halo CMEs and derive the model parameters.

• Journal of the Korean earth science society
• /
• v.39 no.6
• /
• pp.593-599
• /
• 2018

The onset times of P- and S-waves are important information to have reliable earthquake locations, 1D or 3D subsurface velocity structures, and other related studies in seismology. As the number of seismic stations increases significantly in recent years, it becomes a formidable task for network operators to pick phase arrivals manually. This study used a simple method to estimate additional P- and S-wave arrival times for local earthquakes when a priori information (event location and time) is available using the Akaike Information Criterion (AIC). We applied the AIC program to the earthquake data recorded at the seismic station located in Gyeongsan (DAG2). The comparisons of automatically estimated phase arrival times with manually picked onset times showed that 95.1% and 93.7% of P-wave and S-wave arrival time estimations, respectively, are less than 0.1 second difference. The higher percentage of agreement presented the method which can be successfully applied to large data sets recorded by high-density seismic arrays.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.87-95
• /
• 2010

In this paper, we propose an improved TDoA (Time Difference of Arrival) localization scheme using PSO (Particle Swarm Optimization) in UWB (Ultra Wide Band) systems. The proposed scheme is composed of two steps: re-estimation of TDoA parameters and re-localization of a tag position. In both steps, the PSO algorithm is employed to improve the performance. In the first step, the proposed scheme re-estimates the TDoA parameters obtained by traditional TDoA localization to reduce the TDoA estimation error. In the second step, the proposed scheme with the TDoA parameters estimated in the first step, re-localizes the tag to minimize the location error. The simulation results show that the proposed scheme achieves a more superior location performance to the traditional TDoA localization in both LoS (Line-of-Sight) and NLoS (Non-Line-of-Sight) channel environments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.483-489
• /
• 2009

The Time Difference of Arrival (TDOA) algorithm is being used widely for identifying the location of a source emanating either electrical or acoustic signal. It's application areas will not be limited to identifying the source at a fixed location, for example the origin of an earthquake, but will also include the trajectory monitoring for a moving source equipped with a GPS sensor. Most of the TDOA algorithm uses time correlation technique to find the time delay between received signals, and therefore difficult to be used for identifying the location of multiple sources. In this paper a TDOA algorithm based on cross-spectrum is developed to find the trajectory of two sound sources with different frequencies. Although its application is limited to for the sources on a disk plane, but it can be applied for identifying the locations of more than two sources simultaneously.