• 한국군사과학기술학회지
• /
• 제8권2호
• /
• pp.77-87
• /
• 2005

The thermomechanical characteristics were evaluated for 17-4PH stainless steel widely used in supersonic airframe subjected to both aerodynamic loading and heating. The thermomechanical tests were conducted under both elevated temperature and rapid heating condition from $1^{\circ}C/sec\;to\;28^{\circ}C/sec$. The thermomechanical behaviors under rapid heating were compared with those of elevated temperature after 1/2 hour exposure in terms of yield stress to investigate the influence of heating rates. A heating rate-yield temperature parameter was suggested for rapid heating based on time-temperature parameters, and master yield stress curve was obtained by using these parameters. The experimental results and methodology from this study can be used as basic engineering data when designing supersonic vehicle structures subjected to aerodynamic loading and severe heating environment.

• 한국식품과학회지
• /
• 제30권6호
• /
• pp.1327-1332
• /
• 1998

The optimum thermal condition of retort Biji product was determined by heat penetration curve, aerobic bacteria count and sensory test. Retort Biji showed a simple logarithmic heating curve regardless of solid content. Heating time was a $26{\sim}27$ min until Fo value reached 9 min and the amount of microorganism in the Biji product sterilized for 26 min at $121^{\circ}C$ were decreased to $10^{-4}\;CFU/g$, indicating the safe range for retort product. The rate of heat penetration was reduced as solid content and size of product were increased, whereas sterilization temperature and initial temperature of product influenced the heat penetration curve. Sensory scare indicated that there was no significant difference in color, flavor, and appearance among different thermal processes. However, Biji product sterilized at $121^{\circ}C$ showed the highest score in overall preference value.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.397-406
• /
• 2000

Hopkinson effect in the HDDR-treated Nd$\sub$15/Fe$\sub$77/B$\sub$8/ alloy was examined in detail by means of a thermomagnetic analysis with low magnetic field (600 Oe). The emergence and magnitude of maximum in magnetisation in the thermomagnetic curve due to the Hopkinson effect was correlated to the grain structure and coercivity of the HDDR-treated material. the HDDR-treated materials showed clear Hopkinson effect (maximum in magnetisation just below the Curie temperature of the Nd$\sub$2/Fe$\sub$14/B phase) on heating in the thermomagnetic curve. Magnitude of the magnetisation rise due to the Hopkinson effect became smaller as the recombination time increased. The magnetisation recovery at room temperature on cooling from above the Curie temperature became smaller as the recombination time increased. The HDDR-treated materials with shorter recombination time, finer grain size and higher coercivity showed larger magnetisation maximum due to Hopkinson effect in the thermomagnetic curve.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.50-51
• /
• 2013

In case of Korea, it goes frequently that underground parks has been burned. Based on standard temperature time curve(ISO-834), gerber, walls, slab of structures are constructed. However, Standard temperature time Curve is not considered that buildings are affected by vehicle fire. that is why it has the hazard that makes building reinforcement feeble. Based on the result that got from vehicle experiment before, we made four RC slab in this experiment and set the fire severity. according to the loading experiment after heating, we measured the effects that makes reinforcement and shape changes. Furthermore, we examined the safty of the structure by comparing before and after heating.

• 한국산학기술학회논문지
• /
• 제16권7호
• /
• pp.4375-4380
• /
• 2015

선박용 디젤엔진 부품인 블랭크 단조품 가열 시 생산성 및 품질을 향상시키기 위하여 새로운 가열공정을 제안하였다. 본 연구에서는 새로운 블랭크 가열공정을 평가하고 가열공정 설계기준을 정립하기 위하여 수치해석 전용 프로그램인 ANSYS를 사용하여 재료의 비선형을 고려한 온도분포, 열응력 해석을 수행하였다. 가열조건은 승온단계와 유지단계로 구성되어 총 32시간이며 가열 시 시간경과에 따른 블랭크 내 외부의 온도분포와 열응력 변화를 평가하였다. 그 결과 가열 시 승온단계에서 블랭크 내 외부 온도차는 시간이 경과함에 따라 점차 증가하여 최종 승온단계에서 최대 온도차가 발생하나 유지단계에서 온도차는 점진적으로 감소하는 반면에 가열이 시작되어 10시간 경과 후 블랭크 내부에는 최대 등가응력 $12.5kg/mm^2$가 발생한다는 것을 알 수 있다. 따라서 단조품 가열공정을 설계함에 있어서 가열 후 10시간 경과 시, 즉 노내 온도 $650^{\circ}C$에서 블랭크 내 외부 온도차는 $150^{\circ}C$이내가 되도록 관리해야 한다.

• 한국항공우주학회지
• /
• 제32권8호
• /
• pp.101-108
• /
• 2004

본 연구에서는 비행체 구조재료인 A12024-T3에 대하여 공력가열환경을 모사할 수 있는 복사가열기를 제작하였으며 $1^{\circ}C/sec{\sim}30^{\circ}C/sec$ 가열률 범위에서 열기계적 인장특성을 평가하였다. 가열환경에 따른 재료강도 평가를 위하여 급속가열 인장시험 결과와 일정 온도로 30분 노출후의 인장시험결과를 항복응력 측면에서 비교 고찰하였다. 급속가열 인장시험 결과로부터 시간-온도계수를 응용한 가열률-항복온도 계수를 도출하였으며, 항복응력을 가열률과 항복온도로 표현되는 실험적 master 수식을 제안하였다. 본 연구 결과를 통하여 획득 된 급속가열 안장시험결과들은 초음속 비행체 설계시 선정재료의 안전여유를 판단하는 기초자료로 활용될 수 있다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권8호
• /
• pp.836-850
• /
• 1996

In this study, we have analyzed structural analysis and measured ferroelectric characteristics of PZT thin films prepared by sol gel process with different sintering conditions and different Zr/Ti mot%. When the Zr mot% of PZT thin film was increased, it was found that the remanent. polarization and coercive field were decreased and increased, respectively. Also, the maxium dielectric constant of PZT(50/50) thin film was 786.8. We got double hysteresis(anti-fcrroelectric) curve from PbZrO$_{3}$ thin film. As heating rate goes up, pyrochlore phase of PZT thin film was decreased and dielectric and ferroelectric characteristics were improved. As a result of variation of sintering temperature and time 500.deg. C-800.deg. C and 5 sec.-8 hours, respectively, we got optimal sintering temperature and time. The optimium sintering temperature and time of conventional furnace method and rapid thermal processing method were 650.deg. C-700.deg. C for 30-60 minutes and 700.deg. C/20 seconds-2 minutes, respectively.

• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.58-66
• /
• 2016

저온진공건조 조건에 따른 곶감의 건조특성 및 품질적 변화를 분석하였다. 곶감의 건조 특성은 전형적인 항율건조기간과 감율건조기간이 존재함을 확인 할 수 있었다. 진공압력이 높을수록 가열온도가 높을수록 곶감의 당도, 당 함량, 경도 값은 높게 나타났으며 이에 비해 명도 값은 낮게 나타남을 알 수 있었다. 기존 천일 및 열풍건조를 대처할 수 있는 진공건조의 최적 조건은 진공압력이 40~50kPa abs., 가열온도 $30^{\circ}C$, 건조시간은 3~4일 이었다.

• Journal of Magnetics
• /
• 제6권2호
• /
• pp.61-65
• /
• 2001

The Hopkinson effect in the HDDR-treated $Nd_{15}Fe_{77}B_8$ allay was examined in detail by means of a thermo-magnetic analysis with low magnetic field (600 Oe). The emergence and magnitude of maximum in magnetisation in the thermomagnetic curve due to the Hopkinson effect was correlated with the grain structure and coercivity of the HDDR-treated material. The HDDR-treated materials showed a clear Hopkinson effect (maximum in magnetisation just below the Curie temperature of the $Nd_2Fe_{14}B\;$ phase) on heating. The magnitude of the magnetisation rise due to the Hopkinson effect became smaller as the recombination time increased. The magnetisation recovery at room temperature on cooling from above the Curie temperature became smaller as the recombination time increased. The HDDR-treated materials with shorter recombination time, finer grain size and higher coercivity showed larger magnetisation maximum due to the Hopkinson effect in the thermo-magnetic curve.

• Applied Microscopy
• /
• 제45권2호
• /
• pp.95-100
• /
• 2015

The in-situ heating transmission electron microscopy experiment allows us to observe the time- and temperature-dependent dynamic processes in nanoscale materials by examining the same specimen. The temperature, which is a major experimental parameter, must be measured accurately during in-situ heating experiments. Therefore, calibrating the thermocouple readout of the heating holder prior to the experiment is essential. The calibration can be performed using reference materials whose phase-transformation (melting, oxidation, reduction, etc.) temperatures are well-established. In this study, the calibration experiment was performed with four reference materials, i.e., pure Sn, Al-95 wt%Zn eutectic alloy, NiO/carbon nanotube composite, and pure Al, and the calibration curve and formula were obtained. The thermocouple readout of the holder used in this study provided a reliable temperature value with a relative error of <4%.