• 한국소음진동공학회논문집
• /
• 제18권8호
• /
• pp.823-831
• /
• 2008

Since it needs the light computational load and small database, sound source localization method using time delay of arrival(TDOA method) is applied at many research fields such as a robot auditory system, teleconferencing and so on. Researches for time delay estimation, which is the most important thing of TDOA method, had been studied broadly. However studies about factors for time delay estimation are insufficient, especially in case of real environment application. In 1997, Brandstein and Silverman announced that performance of time delay estimation deteriorates as reverberant time of room increases. Even though reverberant time of room is same, performance of estimation is different as the specific part of signals. In order to know that reason, we studied and analyzed the factors for time delay estimation using speech signal and room impulse response. In result, we can know that performance of time delay estimation is changed by different R/D ratio and signal characteristics in spite of same reverberant time. Also, we define the performance index(PI) to show a similar tendency to R/D ratio, and propose the method to improve the performance of time delay estimation with PI.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1120-1124
• /
• 2005

We reviewed controllers with a time delay estimation in this paper. Time delay control (TDC) and sliding mode control (SMC) are well known robust control schemes. Basically, the TDC has a main characteristic called a time delay estimation from which we can estimate the total uncertainty of a system. . The TDC causes the stick-slip in the case of systems with a friction. The so-called TDCSA which are short for TDC with switching action was developed to reduce the stick-slip. The TDC has the additional switching action term in the TDC structure. In the other hand, the SMC dose not have a time delay estimation but instead it can estimate the system uncertainty through the switching action. The SMC has a difficulty to estimate the total uncertainty of a system because it does not have a time delay estimation. In order to solve the difficulty, some control schemes were developed. Among them, we need to focus our attention on two control schemes: SMCPE and SMCTE, which are short for sliding mode control with a perturbation estimation and sliding mode control with a time delay estimation, respectively. In this paper, we analyzed and compared the characteristic of above three controllers. Even though the motives for the development of three control schemes are different, three control schemes have much in common in terms of their controller structures.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권5호
• /
• pp.938-958
• /
• 2011

Ubiquitous web services have been expanding in various business areas with the evolution of wireless Internet technologies, accessible and usable with a variety of mobile Internet devices such as smart phones. Ubiquitous mobile-web information services can be evaluated for accessibility and usability with the mobile Internet devices interacting with mobile-web information servers. In human mobile-web activity, a web server could be a unified center for mobile-web interaction services as well as for real-time estimation and analysis of mobile-web interaction sessions. We present a real-time estimation and analysis scheme for time-based accessibility and usability in ubiquitous mobile-web services. With real-time estimation/analysis of sessions in a mobile-web server, we estimated the time-based accessibility and usability for comparison between different web services as well as for applications in mobile cloud computing services. We present empirical results based on the implementation of the real-time estimation/analysis scheme.

• 한국통신학회논문지
• /
• 제38A권4호
• /
• pp.310-317
• /
• 2013

본 논문에서는 실시간 위치 추적 시스템 (RTLS: real-time locating system)을 위한 ESPRIT 기반의 초 분해능 지연 시간 추정 (super-resolution time delay estimation) 알고리즘을 개발하고 여러 가지 다중 경로 환경에서 성능을 분석한다. 지연 시간 추정을 위한 기존의 코릴레이션 방식은 다중 경로들의 지연 시간의 차이가 한 칩 이내일 경우 성능이 급격히 저하되는 문제점이 있다. 이러한 문제를 해결하기 위해 대표적인 초 분해능 도래각 추정 알고리즘인 ESPRIT을 지연 시간 추정에 적용하여 주파수 영역 초 분해능 지연 시간 추정 알고리즘을 개발하고 여러 가지 다중 경로 환경에서 알고리즘의 성능을 분석한다.

• 제어로봇시스템학회논문지
• /
• 제18권3호
• /
• pp.285-294
• /
• 2012

Using bearing measurement only, target motion state is not directly obtained so that TMA (Target Motion Analysis) is needed for this situation. TMA is a nonlinear estimation technique used in passive SONAR systems. Also it is the one of important techniques for underwater combat management systems. TMA can be divided to two parts: batch estimation and sequential estimation. It is preferable to use sequential estimation for reducing computational load as well as adaptively to target maneuvers, batch estimation is still required to attain target initial state vector for convergence of sequential estimation. Selection of batch time interval which depends on observability is critical in TMA performance. Batch estimation in general utilizes predetermined batch time interval. In this paper, we propose a new method called the BTIS (Batch Time Interval and Initial State Estimation). The proposed BTIS estimates target initial status and determines the batch time interval sequentially by using a bank of GMM-TS (Gaussian Mixture Measurement-Track Splitting) filters. The performance of the proposal method is verified by a Monte Carlo simulation study.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.17-18
• /
• 2006

In this paper, we propose a robust detection scheme of OSTBCs with channel estimation errors over time-selective fading channels. Channel estimation errors are inevitable over time-selective fading channels and even small channel estimation errors dramatically degrade the performance of space-time block coding schemes. Therefore, it is desired to investigate the effect of channel estimation errors on the performance of the proposed detection scheme compared with the existing detection scheme. The proposed detection scheme minimizes noise enhancement and impact of channel estimation errors which occur in an existing detection scheme. It is shown by simulations that the proposed detection scheme performs better than the existing detection scheme over time-selective fading channels.

• 한국군사과학기술학회지
• /
• 제11권4호
• /
• pp.116-123
• /
• 2008

In this paper we study the performance of the measurement time-delay estimation of tightly-coupled GPS/INS(Global positioning system/Inertial Navigation system) system. Generally, the heading error estimation performance of loosely-coupled GPS/INS system using GPS's Navigation Solution is poor. In the case of tightly-coupled GPS/INS system using pseudo-range and pseudo-range rate, the heading error estimation performance is better. However, the time-delay error on the measurement(pseudo-range rate) make the heading error estimation performance degraded. So that, we propose the time-delay model on the measurement and compose the time-delay estimator. And we confirm that the heading error estimation performance in the case of measurement time-delay existence is similar with the case of no-delay by Monte-Carlo simulation.

• 한국통신학회논문지
• /
• 제30권8A호
• /
• pp.649-655
• /
• 2005

OFDMA 하향링크 시스템에서 시간, 주파수 동기 오프셋이 존재하는 환경에 강인한 채널추정 기법을 제안한다. 본 논문에서는 시간 동기, 주파수 동기, 및 채널추정을 동시에 수행하는 방법을 제안함으로써, 시간 및 주파수 동기화 과정에서 생기는 에러가 채널 추정 과정에 주는 영향을 최소화하였다. 시뮬레이션 결과 제안된 채널추정 기법은 time windowing과 time advancement를 통해서 inter-carrier interference (ICI)와 inter-symbol interference(ISI)를 제거하고 동기화 과정간의 조화를 이룸으로써 기존의 채널추정 기법들에 비해 약 3dB 성능이 향상되었다.

• 대한교통학회지
• /
• 제24권2호
• /
• pp.157-168
• /
• 2006

구간검지시스템에서 수집되는 통행시간 정보는 과거 개별차량의 검지기 통과시각(도착시각)을 기준으로 수집되는 특성이 있다. 따라서 구간검지시스템에 의해 수집되는 통행시간 정보는 도착시각기준이 아닌 출발시각기준으로 산출되어야 하고 현재시점(On-Line)에서 통행시간 추정 및 예측이 되어야 한다. 그러나 기존의 구간검지시스템을 이용한통행시간 추정 및 예측 연구들은 도착시각기준으로 수집되는 개별차량 통행시간 자료를 이용함으로 출발시각기준 On-Line 통행시간 정보 관련 연구를 체계적으로 접근하기 어려운 실정이다. 본 연구에서는 On-Line 출발시각기준의 통행시간 정보의 개념을 정립하고 이에 따른 시사점을 도출하였다 그리고 베이지안 추론을 이용하여 고속도로를 대상으로 한 출발시각기준의 On-Line 링크통행시간 추정 알고리즘을 개발하였다. 그 결과, 본 연구에서 개발한 알고리즘은 On-Line 통행시간 정보 질의 정확성과 신속성 측면에서 개선된 통행시간 대표값(평균값)을 추정하는 것으로 나타났다.

• 한국CDE학회논문집
• /
• 제8권4호
• /
• pp.254-261
• /
• 2003

In mold and die shops, NC machining process mainly affects the quality of the machined surface and the manufacturing time of molds and dies. The estimation of NC machining time is a prerequisite to measure the machining productivity and to generate a process schedule, which generally includes the process sequence and the completion time of each process. It is required to take into account dynamic characteristics in the estimation, such as the ac/deceleration of NC machine controllers. Intensive observations at start and end points of NC blocks show that a minimum feedrate, a key variable in a machining time model, has a close relation to a block distance, an angle between blocks, and a command feedrate. Thus, this study addresses regression models for the minimum feedrate estimation on short and long NC blocks considering these parameters. Furthermore, machining time estimation models by the four types of feedrate behaviors are suggested based on the estimated minimum feedrate. To show the validity of the proposed machining time model, the study compares the estimated with the actual machining time in the sculptured surface machining of several mold dies.