• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.516-522
• /
• 2009

The dimmable magnetic ballast which applies the variable inductor needs a switching process for the dimming process, and it consists of mechanical relays because of costs and reliabilities. However, it is hard to operate with correct timing in mechanical relay, so relays reduce their own life time in inductive applications. Moreover this creates a destructive problem at the switching process. The life time reduction of relays means the life time reduction of the ballast. Thus, in this paper, we described the problem at the witching process in the dimmable magnetic ballast with a variable inductor, which consists of relays and the soft AC switching method in order to solve the problems. As result, we achieved the improvement of the life time and reliability of the ballast.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.3
• /
• pp.128-135
• /
• 2010

Recently complexity of embedded software cause to be used real-time operating system (RTOS) to implement various functions in the embedded system. And also, according to requirement of complex functions in embedded systems, the number as well as complexity of tasks get increased continuously. In case that many tasks collaborated in a microprocessor, context switching time between tasks is a overhead waisting a CPU resource. Therefore the time of task context switching is an important factor that affects performance of RTOS. In this paper, we concentrate on the improvement of task context switch for reducing overhead and achieving fast response time in RTOS. To achieve these goal, we suggest multiple register files and task context switching algorithm. By reducing the context switch overhead, we try to ease scheduling and assure fast response times in multitasking environment. As a result, the context switch overhead decreased by 8~16% depend on the number of register files, and some task set which are not schedulable with single register file are schedulable due to that decrease with multiple register files.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.367-370
• /
• 2004

We fabricated PLT(5) thin film on $Pt/TiO_x/SiO_2/Si$ substrate by using sol-gel method and investigated leakage current, switching and retention properties. The leakage current density of PLT(5) thin film was $3.56{\times}10^{-7}A/cm^2$ at 4V. In the examination of switching properties, pulse voltage and load resistance were $2V{\~}5V$ and $50{\Omega}{\~}3.3k{\Omega}$, respectively. Switching time had a tendency to decrease from 520ns to 140ns with the increase of pulse voltage, and also the time was increased from 140ns to $13.7{\mu}s$ with the increase of load resistance. The activation energy obtained from the relation of applied pulse voltage and switching time was about 143kV/cm. The error of switched charge density between hysteresis loop and experiment of polarization switching was about $10\%$. Also, polarization in retention was decreased as much as about $8\%$ after $10^5$s.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.7
• /
• pp.1130-1136
• /
• 2015

Most equipments which are used to measure the switching power of the turnout depend on imports. As the data is limited to the measurements of the switching power, it is said that the equipment is insufficient to check the errors of the turnout and the electrical point machine, and set up the data for operating and maintenance. We studied not only measurements of the switching power of all turnout being used in domestic but also the development of the turnout performance total analysis equipment which can measure switching time, voltage, and current etc. at the same time. Considering that switching power of the turnout is the most basic element to check the irregularities of the turnout, in this paper, we analyzed the irregularities of the turnout through correlation between switching power of the turnout, voltage, and current of the electrical point machine. Also we performed test in commercial railway line where the turnout of MJ81 type and NS type was installed. And it is said that the test results can be used as basic technologies for ICT based real-time diagnosis and monitoring of the turnout.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.492-494
• /
• 2005

In this paper, RCF analysis method which is very powerful to analyze non-continuous systems with switching elements is applied to small signal stability problems. As an effect of switching operations, the eigenvalues of system can be changed and newly unstable oscillation modes may be occurred. Also, changing the ON/OFF time intervals of switching equipments may make the system stable or unstable. As an illustrating example, the oscillation modes of system with different switching time intervals are computed by RCF analysis method.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.471-473
• /
• 1997

In this paper, We propose a variable structure controller with time varying switching surface. We calculate the maximum value of switching surface gradient under the bound of input. To enhance the robustness, we, choose a time varying switching surface gradient that is of the 3rd order polynominal form. We use evolution strategy to optimize the parameters of the switching surface gradient. Finally, the proposed method is applied to the motor position control. Simulation results show that the proposed method is more useful than the conventional variable structure controller.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.5
• /
• pp.425-430
• /
• 2006

To meet an increasing demand for high performance in gun dynamic plant, both a precise and a fast response positioning are strongly required for the gun servo system. A mode switching control(MSC) scheme, which includes a fine stabilizing controller, fast positioning one and a switching function, is widely used to meet this requirement. Stabilization is performed through PID controller, while a time optimal control method is used for target designation. In this paper, a modified PTOS(Proximate Time Optimal Servomechanism) algorithm is derived so as to accommodate the damping term in the gun plant model. Also, applying a mode switching strategy, the bumpless transfer is made possible when the controller switches from PTOS to PID. To show the effectiveness of the overall control system, simulation results are given including the gun dynamics.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.9
• /
• pp.445-452
• /
• 2001

Two switching signal patterns are proposed to prevent short circuit of PWM ac choppers. The voltage detection method and the current detection method are proposed to execute two switching signal patterns. In the voltage detection method, the dead-time has to be inserted to the switching signals after polarity of input voltage is checked by voltage transducer at input side. In the current detection method, the direction of load current is checked by current transducer at output side, and the dead-time delay is not considered. Controlling circuit built by current detection method is simple because the dead-time delay is considered. The experimental results are presented to prevent short circuit of ac chopper safely.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.214-221
• /
• 2015

In this paper, we present robust estimation and detection algorithms for discrete-time switched linear systems whose output measurements are corrupted by noises. First, a mode estimation algorithm is proposed based on the minimum distance criterion. Then, state variables are also observed under the active mode estimate. Second, a detection algorithm is constructed to detect the mode switching of the switched system. With the boundedness of measurement noise, the proposed estimation algorithm returns the exact active mode and approximate state information of the switched system. In addition, the detection algorithm can detect the switching time within a pre-determined time interval after the actual switching occurred.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.5
• /
• pp.52-60
• /
• 1997

Photonic switching systems with throughput above Tbit/s are reuried to transport vast amounts of information for the coming B-ISDN. In this paper, we proposed a new time-division hybrid WDM photonic swithc architecture, the proposed basic switch module has simple configuratin consisted of frequency routers for wavelength division and cell coders and star couplers for time division. Through the comparison with other sysems in field of switching capacity, hardware complexity and cost effect of implemetnation, we proved that the proposed system is suitable for large-capacity photonic switching system.