• Ocean Systems Engineering
• /
• 제1권4호
• /
• pp.355-372
• /
• 2011

Based on the fully nonlinear velocity potential theory, the liquid sloshing in a three dimensional tank under random excitation is studied. The governing Laplace equation with fully nonlinear boundary conditions on the moving free surface is solved using the indirect desingularized boundary integral equation method (DBIEM). The fourth-order predictor-corrector Adams-Bashforth-Moulton scheme (ABM4) and mixed Eulerian-Lagrangian (MEL) method are used for the time-stepping integration of the free surface boundary conditions. A smoothing scheme, B-spline curve, is applied to both the longitudinal and transverse directions of the tank to eliminate the possible saw-tooth instabilities. When the tank is undergoing one dimensional regular motion of small amplitude, the calculated results are found to be in very good agreement with linear analytical solution. In the simulation, the normal standing waves, travelling waves and bores are observed. The extensive calculation has been made for the tank undergoing specified random oscillation. The nonlinear effect of random sloshing wave is studied and the effect of peak frequency used for the generation of random oscillation is investigated. It is found that, even as the peak value of spectrum for oscillation becomes smaller, the maximum wave elevation on the side wall becomes bigger when the peak frequency is closer to the natural frequency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.840-842
• /
• 2001

The cogging torque and torque ripple in motor which cause noise and vibration are an inevitable phenomenon and they give a bad effect to motor performance. So we are required to reduce the cogging torque and torque ripple not by electrical controlling but by changing the inner mechanical structure and we focused on the permanent magnet. In this research, we calculated current, torque, Back-EMF(electromotive force) and cogging torque according to the change of the magnet shape using two dimensional FEM(Finite Element Method). Maxwell stress tensor and time-stepping method. From the results, we present an appropriate model that can satisfy both low cogging torque, low torque ripple and high efficiency.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권12호
• /
• pp.608-616
• /
• 2006

Recently, a switched reluctance motor is widely used in various industries because it has many advantages such as a simple structure, robustness, less maintenance, high torque/weight ratio, and easy speed control over other types of motors. However, a switched reluctance motor inherently produces acoustic noise and vibration caused by torque ripple. Applications of these motors where silent operation is desirable have thus been limited. In this paper, a new stator pole face having a non-uniform air-gap and a pole shoe attached to the lateral face of the rotor pole are suggested in order to minimize torque ripple. The effects of each design parameter are validated using a time-stepping finite element method. The parameters are optimized by utilizing response surface method (RSM) combined with (1+1) evolution strategy. The result shows that the optimized shape gives higher average torque and drastically reduced torque ripple.

• 한국항공우주학회지
• /
• 제40권5호
• /
• pp.395-404
• /
• 2012

본 논문에서는 전산유체역학을 이용하여 3차원 비행체 형상에 대한 동안정 미계수를 예측하였다. 피치에 대한 미계수는 피치방향의 조화진동운동을 통하여 계산하였고 롤 감쇠계수는 비관성 좌표계에 대한 정상해석을 통하여 계산하였다. 계산은 Basic Finner와 SDM 형상에 대해 수행했으며 다른 연구자의 실험적/수치적 결과와 비교하였다. 유동 계산을 위해 비관성 좌표계와 관성 좌표계에서 모두 사용할 수 있는 3차원 Euler 해석자를 개발하였다. 시간 정확성을 유지한 비정상 해석을 위해 이중시간적분법을 적용하였다. 동안정 미계수계산 결과는 다른 수치 및 실험적 연구 결과들과 잘 일치하는 것을 알 수 있었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.156-156
• /
• 2017

Most crop damages have been occurred by vermin(e.g., wild birds and herbivores) during the period between seeding and the cotyledon level. In this study, to minimize the damage by vermin and acquire the benefits such as protection against weeds and maintenance of water content in soil, immediately vinyl mulching after seeding was devised. Vinyl mulching has been generally covered with black color vinyl, that crop seeding locations cannot be detected by visible light range. Before punching vinyl, non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. For this study, the spline method was relatively faster than the other polynomial interpolation methods, because it has a lower maximum order of formulation when using a system such as the tridiagonal linear equation system which provided the capability of real-time processing. The temperature distribution corresponding to the distance between the crops was 10 cm, and the more clearly the leaf pattern of the crop was visually confirmed. The frequency difference was decreased, as the number of overlapped pixels was increased. Also the wave pattern of points where the crops were recognized were reduced.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.12-20
• /
• 1998

Exter ballistics of a typical high-speed projectile is studied through a flow-visualization experiment and an unstructured grid Navier-Srokes computation. Experiment produced a schlieren photograph that adequately shows the characteristic features of this complex flow, namely two kinds of oblique cone shocks and turbulent wake developing into the downstream. A hybrid scheme of finite volume-element method is used to simulate the compressible Reynolds-Averaged Navier-Stok- es solution on unstructured grids. Osher's approximate Riemann solver is used to discretize the cinvection term. Higher-order spatial accuracy is obtained by MUSCL extension and van Albada ty- pe flux limiter is used to stabilize the numerical oscillation near the solution discontinuity. Accurate Gakerkin method is used to discretize the viscous term. Explict fourth-order Runge-Kutta method is used for the time-stepping, which simplifies the application of MUSCL extension. A two-layer k-$\varepsilon$ turbulence model is used to simulate the turbulent wakes accurately. Axisymmetric folw and two-dimensional flow with an angle of attack have been computed. Grid-dependency is also checked by carrying out the computation with doubled meshes. 2-D calculation shows that effect of angle of attack on the flow field is negligible. Axi-symmetric results of the computation agrees well with the flow visualization. Primary oblique shock is represented within 2-3 meshes in numerical results, and the varicose mode of the vortex shedding is clearly captured in the turbulent wake region.

• 한국주거학회논문집
• /
• 제26권2호
• /
• pp.89-101
• /
• 2015

The purpose of this study is to explore the housing pathways of middle-class married women toward owning a first home. In doing so, an in-depth interview as a qualitative method was conducted, life history was utilized to track down the path to first-home owning, and all the interviews were transcribed for analysis. The research participants were well-educated middle-class full-time housewives owning a home. The findings indicated that family formation through marriage and child birth was a primary driving force to buy a home. It was shown that owning a home was perceived not just as a stepping stone for building both family wealth and social capital but as one of the most important pillars to reinforcing traditional family values. In spite of some intergenerational distinctions on the path toward home owning, commonalities across generations included that home owning was considered to be a social icon for middle-class, it became almost impossible for younger generations without parental support which stimulated the intergenerational transfer of wealth, and it was greatly determined by both family income (affordability) and home finance options(borrowing capacity). This research implies that the changing social landscape transforms the value on homeownership and could undermine the socioeconomic strengths of home owning. Nonetheless, it's of importance to strategically assist first homebuyers who are likely to be a member of middle-class.

• 한국멀티미디어학회논문지
• /
• 제15권1호
• /
• pp.108-114
• /
• 2012

재난의 다양화와 빈번화가 이전보다 가속화됨에 따라 사회의 각 기관 및 시설에서는 이에 효과적으로 대응하기 위한 재난정보시스템 및 서비스를 구축하기 위해 많은 노력을 기울이고 있다. 이를 위해 휴대용 전화기, 스마트폰과 같은 이동식 단말기를 사용하거나 이전에 문서화되어 보관된 재난데이터를 활용하는 등의 다양한 방법을 통해 재난정보를 수집하고 있다. 하지만 기존의 재난정보 수집방법은 데이터의 체계성이 부족하기 때문에 재난정보시스템 구축 시에 적지 않은 노력과 시간이 필요하며, 다른 시스템과의 유연한 연계가 어렵다. 따라서 본 논문에서는 스마트 폰 기반의 재난정보수집 애플리케이션을 통해 재난현장의 다양한 정보를 신속 정확하게 수집하여 이전 재난정보 수집방법의 취약점을 보완하고자 한다.

• 전자공학회논문지SC
• /
• 제40권3호
• /
• pp.127-134
• /
• 2003

본 논문에서는 퍼지제어를 이용하여 사람의 얼굴을 추적하는 카메라를 구동하는 시스템을 구현한다. 팬틸트(Pan Tilt)구조를 가진 카메라 시스템은 먼저 영상을 PC로 보내고 PC에서는 추적알고리즘에 의한 추적 좌표를 다시 카메라에 전송하면 카메라는 목표 얼굴을 실시간으로 추적하는 방식으로 되어 있다. 카메라를 구동하는 2축의 스텝모터는 PC에서 전송된 목표 좌표로 최대한 빠르고 또한 부드럽게 제어되어야 한다. 이를 위해서 본 논문에서는 퍼지제어기를 제안하여 구동용 가·감속 주파수를 만들고 두 축의 스텝모터를 빠르면서도 부드럽게 제어한다 그리고 본 제안 방식의 효율성을 검증하기 위하여 실험 장치를 제작하고 실험을 수행한다.

• 한국지구과학회지
• /
• 제39권4호
• /
• pp.317-326
• /
• 2018

Effect of the nonuniform grid on the two-dimensional transport equation was investigated in terms of theoretical analysis and finite difference method (FDM). The nonuniform grid having a typical structure of the numerical weather forecast model was incorporated in the vertical direction, while the uniform grid was used in the zonal direction. The staggered and non-staggered grid were placed in the vertical and zonal direction, respectively. Time stepping was performed with the third-order Runge Kutta scheme. An error analysis of the spatial discretization on the nonuniform grid was carried out, which indicated that the combined effect of the nonuniform grid and advection velocity produced either numerical diffusion or numerical adverse-diffusion. An analytic function is used for the quantitative evaluation of the errors associated with the discretized transport equation. Numerical experiments with the non-uniformity of vertical grid were found to support the analysis.