• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.101-104
• /
• 2003

In this paper, we analyze the performance of transmitter and receiver of W-CDMA system using the space-time code in downlink over JTC realistic channel model. We can get a diversity gain by using the space time code. We also apply the RAKE receiver to improve a performance in multi-path fading channel environment.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.175-177
• /
• 2007

This paper is concerned with a performance analysis using a wired/wireless gateway based on DeviceNet. For the performance analysis, the data transmission time between DeviceNet and the wireless devices is investigated and analyzed. The experimental results show the perfom1ance in terms of the polling/COS service time and end-to-end delay.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.277-280
• /
• 2003

In this paper, we analyze the performance of transmitter and receiver of W-CDMA system using the channel coding and space time code in downlink over ITU-R realistic channel model. We can improve the reliability of communications and increase the data rate by channel coding, and we can get a diversity gain by using the space time code over fading channels. We also apply the RAKE receiver to improve tile performance in multi-Path fading channel environment.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.5
• /
• pp.11-16
• /
• 1998

DS/CDMA systems for the high speed communication require high code rats. In discrete time CDMA receivers, the performance degradation, caused by the phase difference between transmission code and reference code, increase the sampling frquency of the receiver. This increment of the sampling frequency makes hard to implement high speed CDMA systems. This paper analyzes the SIR(signal to interference Ratio) performance of the discrete time DS/CDMA system, based on the code phase difference. The results of this paper may be useful to study a low-sampling CDMA receiver.

• The Journal of the Korea Contents Association
• /
• v.17 no.10
• /
• pp.587-597
• /
• 2017

Recently, the demand for real-time performance in mobile environment is increasing due to the improvement of hardware performance, however a GPOS(General-Purpose Operating System) such as Android and Linux do not provide real-time performance. We developed RTiK(Real-Time implant Kernel) for this problem, but it has the disadvantage of supporting only x86 Architecture. In this paper, we designed and implemented a RTiKA(Real-Time implanted Kernel for ARM) to support real-time in ARM Linux. We used MCT(Multi-Core Timer) timer which replaces Local APIC Timer for real-time support, and we measured the period of generated real-time task for performance verification and evaluation. As the recent the RTiKA can guarantee the operating of several real-time tasks based on the cycle of 1ms.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.11
• /
• pp.21-27
• /
• 2019

Recently, embedded systems have been introduced in various fields such as smart factories, industrial drones, and medical robots. Since sensor data collection and IoT functions for machine learning and big data processing are essential in embedded systems, it is essential to port the operating system that is suitable for the function requirements. However, in embedded systems, it is necessary to separate the hard real-time system, which must process within a fixed time according to service characteristics, and the flexible real-time system, which is more flexible in processing time. It is difficult to port the operating system to a low-performance embedded device such as 8BIT MCU to perform simultaneous real-time. When porting a real-time OS (RTOS) to a low-specification MCU and performing a number of tasks, the performance of the real-time and general processing greatly deteriorates, causing a problem of re-designing the hardware and software if a hard real-time system is required for an operating system ported to a low-performance MCU such as an 8BIT MCU. Research on the technology that can process real-time processing system requirements on RTOS (ported in low-performance MCU) is needed.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.23-35
• /
• 2023

Korea Augmentation Satellite System (KASS) is a satellite-based augmentation system (SBAS) that provides approach procedure with vertical guidance-I (APV-I) level corrections and integrity information to Korea territory. KASS is used to monitor navigation performance in real-time, and this paper introduces the design, implementation, and verification process of mission monitoring (MIMO) in KASS. MIMO was developed in compliance with the Minimum Operational Performance Standards of the Radio Technical Commission for Aeronautics for Global Positioning System (GPS)/SBAS airborne equipment. In this study, the MIMO system was verified by comparing and analyzing the outputs of reference tools. Additionally, the definition and derivation method of accuracy, integrity, continuity, and availability subject to MIMO were examined. The internal and external interfaces and functions were then designed and implemented. The GPS data pre-processing was minimized during the implementation to evaluate the navigation performance experienced by general users. Subsequently, tests and verification methods were used to compare the obtained results based on reference tools. The test was performed using the KASS dataset, which included GPS and SBAS observations. The decoding performance of the developed MIMO was identical to that of the reference tools. Additionally, the navigation performance was verified by confirming the similarity in trends. As MIMO is a component of KASS used for real-time monitoring of the navigation performance of SBAS, the KASS operator can identify whether an abnormality exists in the navigation performance in real-time. Moreover, the preliminary identification of the abnormal point during the post-processing of data can improve operational efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1078-1090
• /
• 2022

The distribution patterns of battery usage time data per battery level are able to affect the performance of estimating battery remaining time in mobile devices. Outliers may mainly affect the estimation performance of statistical regression methods. In this paper, we propose a software framework that detects and processes outliers to improve the estimation performance of statistical regression methods. The proposed framework first detects outliers that degrade the estimation performance. The proposed framework replaces outliers with smoothed data. The difference between an outlier and its replaced data will be properly distributed into individual data. Finally, individual data are reinforced to improve the estimation performance. The numerical results obtained by experimenting the proposed framework confirmed that it yielded good performance of estimating battery remaining time.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.40-43
• /
• 1996

An off-line programming, OLP, system is widely used in automation fines. To help an on-line robot system to carry out desirable tasks planned by the off-line simulation, an approach to the real-time communication is presented. The OLP system developed consists of a software, a host computer(PC), a SCARA robot body, four servo drivers, and four independent joint controllers. This study focuses on the software where real-time communication is included. The software, can be used in teaching, trajectory planning, real-time running, and performance evaluation. The evaluation of different control algorithms is one of the merits of the software. The software can give servo commands for task running. A comparison of generated and corresponding actual trajectories provides the evaluation of task performance. The safety, of the OLP system is ensured by alarming malfuntions of the system. The OLP system developed can reduce the teaching time and increase the user's convenience.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.10
• /
• pp.678-689
• /
• 2004

The major concern of networked control system is network uncertainties such as time delay and data loss. Because these uncertainties may degrade the performance of networked control system and destabilize the entire system. Therefore, the performance and the stability variation of networked control system due to network uncertainties must be considered first in designing networked control system. In particular, the stability analysis of networked control system is most important issue since time delay and data loss can make the overall systems unstable. In this paper, we present a new stability analysis method of networked control system with time delay and data loss, which is impossible in previous works. The proposed method can determine maximum time delay and allowable transmission rate that preserve stability performance of networked control system. The results of the simulation validate effectiveness of our stability analysis method.