• 한국수자원학회논문집
• /
• 제36권5호
• /
• pp.751-760
• /
• 2003

시간 및 공간가중치를 고정하지 않는 Muskingum-Cunge 홍수추적방법에 대한 오차해석을 수행하였다. 오차해석 결과 시간가중치와 공간가중치의 합이 1.0이상인 경우에는 홍수파가 진행하면서 증폭되어 수치해가 발산하였다. 시간가중치와 공간가중치의 합이 작을수록 수치확산이 크게 발생하였다. 격자의 해상도가 낮을수록 수치확산 및 수치진동이 크게 발생하였다. 수치실험과 자연하천에 대한 적용 결과, 공간가중치를 고정하지 않는 경우에는 공간가중치를 0.5로 고정하는 전통적인 Muskingum-Cunge방법보다 첨두의 감쇄가 큰 홍수파 모의에 효과적임을 알 수 있었다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2007년도 춘계학술대회 학술발표 논문집 제17권 제1호
• /
• pp.435-439
• /
• 2007

This paper deals with RLS algorithm using Newton-Raphson method based adaptive forgetting factor for a passive telemetry RF sensor system in order to estimate the time variant parameter to be included in RF sensor model. For this estimation with RLS algorithm, phasor typed RF sensor system modelled with inductive coupling principle is used. Instead of applying constant forgetting factor to estimate time variant parameter, the adaptive forgetting factor based on Newton-Raphson method is applied to RLS algorithm without constant forgetting factor to be determined intuitively. Finally, we provide numerical examples to evaluate the feasibility and generality of the proposed method in this paper.

• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.130-137
• /
• 1990

본 연구에서는 Bueckner의 가중함수법을 열충격 문제에 도입하여 열충격 응력 세기계수를 구하고, 평면변형을 파괴인성치와 비교하여 재료가 열충격을 받은 후 파괴 되는 시간을 이론적으로 계산한다. 또한 음향 방출법을 이용하여 파괴시간을 측정하 고 이론치와 비교한다.

• 정보처리학회논문지D
• /
• 제13D권7호
• /
• pp.923-930
• /
• 2006

본 논문에서는 무기체계 임베디드 소프트웨어의 시간 요소를 고려한 TFM(Time Factor Method) 기반의 시스템 테스트 모델을 설계하고, 적용사례를 통하여 결과를 제시한다. 이를 위해 무기체계 임베디드 소프트웨어의 특징과 시스템 테스트 그리고 객체지향 모델의 표현방법인 UML 표기법에 대하여 알아보고, 시스템 테스트 모델 설계를 위한 TFM 접근 방법으로 시간 요소를 고려한 테스트 방법과 시간 요소 측정 방법 그리고 테스트 케이스 선정 알고리즘을 제시한다. 무기체계 임베디드 소프트웨어의 TFM 기반 시스템 테스트 모델은 세 가지 요소 (X,Y,Z) 로 구성되며, 'X' 에서는 최대시간경로를 선정하는 알고리즘을 통해 테스트 케이스가 도출되고, 'Y' 에서는 Sequence Diagram과 관련된 객체를 식별하고, 'Z'에서는 Timing Diagram을 통하여 식별된 각 객체들의 실행시간을 측정한다. 또한 제안한 W:M 기반 시스템 테스트 모델을 '다기능 미사일 방어시스템'에 적용하여 테스트 케이스를 추출하는 방법을 제시한다.

• Journal of Information Processing Systems
• /
• 제17권1호
• /
• pp.163-177
• /
• 2021

Many methods of discovering social networking communities or clustering of features are based on the network structure or the content network. This paper proposes a community discovery method based on topic models using a time factor and an unsupervised clustering method. Online community discovery enables organizations and businesses to thoroughly understand the trend in users' interests in their products and services. In addition, an insight into customer experience on social networks is a tremendous competitive advantage in this era of ecommerce and Internet development. The objective of this work is to find clusters (communities) such that each cluster's nodes contain topics and individuals having similarities in the attribute space. In terms of social media analytics, the method seeks communities whose members have similar features. The method is experimented with and evaluated using a Vietnamese corpus of comments and messages collected on social networks and ecommerce sites in various sectors from 2016 to 2019. The experimental results demonstrate the effectiveness of the proposed method over other methods.

• Communications for Statistical Applications and Methods
• /
• 제6권1호
• /
• pp.33-42
• /
• 1999

A method of detecting influential observations in principal factor analysis is suggested. it is based on a perturbation of the empirical distribution function and an adoption of the local influence method. An illustrative example is given.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2807-2810
• /
• 2003

In this paper, we propose a fuzzy control method for improving the control performance by automatically tuning the scaling factor. The proposed method is that automatically tune the input scaling factor and the output scaling factor of fuzzy logic system through neural network. Used neural network is ADALINE (ADAptive Linear NEron) neural network with delayed input. ADALINE neural network has simple construct, superior learning capacity and small computation time. In order to verify the effectiveness of the proposed control method, we performed simulation. The results showed that the proposed control method improves considerably on the environment of the disturbance.

• 대기
• /
• 제14권3호
• /
• pp.19-28
• /
• 2004

In this study, two years Automatic Weather Station (AWS) data observed near the coast and islands are used to evaluate gust factors only when time averaged wind speed is higher than 5 ms. The gust factors are quite different in spatial and temporal domain according to analysis method. As the averaged time is increased, the gust factors are also increased. But the gust factors are decreased when wind speed is increased. It is because each wind speed is averaged one and a maximum wind is the greatest one for each time interval. The result from t-test is shown that all data are included within the 99% significance level. A sample standard deviation of ten minutes and one minute are 0.137~0.197, 0.067~0.142, respectively. Recently, the gust factor provided at the Korea Meteorological Administration (KMA) Homepage is calculated with one-hour averaged method. All though this method is hard to use directly for forecasting the strong wind over sea and coast, the result will be a great help to express Ocean Storm Flash in the Regional Meteorological Offices and the Meteorological Stations.

• 조명전기설비학회논문지
• /
• 제27권12호
• /
• pp.93-100
• /
• 2013

This paper propose a method to design the rotor of synchronous reluctance motors(SynRM) for maximum torque and power factor by using DOE(design of experiment) with the design variables which are parameters of barriers and segments. In this process, there are problems that require lots of simulation time and number of simulations when calculating the both torque and power factor using the finite element method in order to find load angle, core loss per speed. In order to improve this problem, we calculate only value of flux linkage by finite element method, and can decrease analysis and the number of analysis time by applying steady state expression of the power factor and torque. Finally, in order to verify the characteristics of optimal model, we make prototype motor and compare with the conventional SynRM. In this experiment, we use the DC current decay test for calculating d-and q-axis inductance.

• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.890-898
• /
• 2014

Critical conduction mode boost power factor correction converters operating at the boundary of continuous conduction mode and discontinuous conduction mode have been widely used for power applications lower than 300W. This paper proposes an enhanced variable on-time control method for the critical conduction mode boost PFC converter to improve the total harmonic distortion characteristic. The inductor current, which varies according to the input voltage, is analyzed in detail and the optimal on-time is obtained to minimize the total harmonic distortion with a digital controller using a TMS320F28335. The switch on-time varies according to the input voltage based on the computed optimal on-time. The performance of the proposed control method is verified by a 100W PFC converter. It is shown that the optimized on-time reduces the total harmonic distortion about 52% (from 10.48% to 5.5%) at 220V when compared to the variable on-time control method.