• 전자공학회논문지SC
• /
• 제48권1호
• /
• pp.1-8
• /
• 2011

MR 센서에 의해 지구자기장의 세기를 측정하여 방위각을 결정하는 전자 Compass의 정밀도는 MR센서 및 OP-Amp.의 온도 Drift, DC Offset등 소자에 의한 오차, 측정주변 자성체에 의한 자기장의 왜곡, 및 Compass Tilt에 의한 오차 등의 영향을 받는다. 본 연구에서는 Set/Reset Pulse 방법에 의해 MR 센서 및 OP-Amp의 온도 Drift 및 DC Offset에 의한 오차를 해결하였고, 주변 자성체에 의한 자기장의 왜곡에 의한 오차를 Hard-Iron Calibration 루틴 수행에 의해 보상하였으며, Compass Tilt에 의한 오차를 Euler Rotational Equation에 의해 보상할 수 있는 3축 MR 센서 및 3축 Accelerometer를 기반으로 하는 전자 Compass 를 설계하였다. 특히 이와 샅이 설계한 전자 Compass를 가지고 3측 MR 센서의 서로 다른 Sensitivity와 OP-Amp.의 서로 다른 Gain등을 규준화하기 위한 Sensitivity Calibration 루틴 수행 시 Tilt의 발생으로 야기되는 오차를 정량적으로 분석하였으며, 이를 바탕으로 $1^{\circ}$정도(精度) Compass를 설계할 수 있었다.

• 한국기계가공학회지
• /
• 제6권3호
• /
• pp.53-57
• /
• 2007

This paper presents a geometrical error compensation of tool alignment for B axis controlled machine. In precision machining, tool alignment is crucial parameter for machined surface. To decrease tool alignment error, plus tilted tool from B axis center is touched to reference work piece and checked the deviation from original position. Same process is performed in minus tilt. Comparing these 2 touch positions, wheel alignment error in X axis and Z axis can be calculated on B axis center. Experimental results show that this compensation method is efficient to correct tool alignment.

• 정보저장시스템학회논문집
• /
• 제8권1호
• /
• pp.11-15
• /
• 2012

In this paper, we experimentally investigated compensation method of the mechanical errors for the micro holographic storage. The aim of this research was overcome of disc tilt and spherical aberration problems. The proposed method was performed by using glass plate and zoom optics.

• 한국멀티미디어학회논문지
• /
• 제16권1호
• /
• pp.67-74
• /
• 2013

본 논문에서는 블루투스 통신 기반에서 최적의 성능을 위한 포인팅 및 보정 알고리즘을 제안한다. 가속도 센서는 각속도 센서보다 데이터 변화량이 더 민감하기 때문에 데이터 출력 값의 오류를 야기하는 주된 원인이 된다. 따라서 가속도 센서로부터의 각 축에 대한 데이터 값에 칼만 필터를 적용함으로써 노이즈를 최소화하였으며, 추가적으로 x, y 변화량에 칼만 필터를 적용함으로써 손 떨림에 대한 보정 효과를 얻을 수 있다. 본 논문에서는 가속도와 각속도 센서 데이터를 Quaternion 사상 처리를 통해 데이터 추출을 적용한다. 추출된 데이터 값에 중력 가속도를 이용한 기울임 보정 알고리즘을 적용함으로써 기울임 보정 효과를 얻을 수 있다. 또한 장치의 급격한 움직임에 의한 센서 데이터의 부정확성을 해결하기 위하여 유전자 알고리즘을 적용한 사용자에 따라 달리 초기 해집단을 생성하는 적응적 포인팅 및 보정 알고리즘을 구현한다.

• 한국시뮬레이션학회논문지
• /
• 제9권4호
• /
• pp.51-58
• /
• 2000

The control of the data retention time is a main issue for realizing future high density dynamic random access memory. The novel junction process scheme in sub-micron DRAM cell with STI(Shallow Trench Isolation) has been investigated to improve the tail component in the retention time distribution which is of great importance in DRAM characteristics. In this' paper, we propose the new implantation scheme by gate-related ion beam shadowing effect and buffer-enhanced ${\Delta}Rp$ (projected standard deviation) increase using buffered N-implantation with tilt and 4X(4 times)-rotation that is designed on the basis of the local-field-enhancement model of the tail component. We report an excellent tail improvement of the retention time distribution attributed to the reduction of electric field across the cell junction due to the redistribution of N-concentration which is Intentionally caused by ion Beam Shadowing and Buffering Effect using tilt implantation with 4X-rotation. And also, we suggest the least requirements for adoption of this new implantation scheme and the method to optimize the key parameters such as tilt angle, rotation number, Rp compensation and Nd/Na ratio. We used MEDICI Simulator to confirm the junction device characteristics. And measured the refresh time using the ADVAN Probe tester.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.205-208
• /
• 2004

The switching mechanism of multi-domain vertical alignment mode LCD and delayed on response time phenomenon in special conditions are investigated. A modified DCC (Dynamic Capacitance Compensation), DCCII has been developed for the fast response time performance in PVA TFT-LCD TVs. DCCII applies a pre-tilt voltage to addressed pixels during the previous frame in addition to an overshoot voltage. In result, the response time less than 8 msec, has been obtained for all moving images through the DCCII technique.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.1000-1003
• /
• 2002

For high density optical storage, there should be a high NA objective lens and a shorter wavelength laser diode. To secure the disc tilt margin related to the coma aberration, moreover, it's difficult to apply the tilt compensation mechanism into the portable PC. In this paper, we proposed the 3-axis asymmetry pickup actuator with high efficiency symmetric magnetic circuit, which consisted of the top cover type inner yoke for high magnetic flux density, the coil stack unit for the 3-axis independent operation and vertically polarized magnets. This newly suggested actuator features DVD-RAM recording, we achieved the high focus & track AC sensitivity and the greatly stabilized system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.397.1-397
• /
• 2002

For high density optical storage, there should be a high NA objective lens and a shorter wavelength laser diode. To secure the disc tilt margin related to the coma aberration, moreover, it's difficult to apply the tilt compensation mechanism into the portable PC. In this paper, we proposed the 3-axis asymmetry pickup actuator with high efficiency symmetric magnetic circuit, which consisted of the top cover type inner yoke for high magnetic flux density, the coil stack unit for the 3-axis independent operation and vertically polarized magnets. (omitted)

• The Korean Journal of Physiology
• /
• 제30권2호
• /
• pp.237-247
• /
• 1996

This study was carried out to determine the effect of $-6^{\circ}$ head-down bedrest on the cardiovascular and hormonal responses to orthostasis and to evaluate the mechanism of orthostatic intolerance. Ten healthy young men were changed the body position from $-6^{\circ}$ head-down or supine bedrest for 2 hr to $70^{\circ}$ head-up tilt for 20 min. During the bedrest, there were no differences in hemodynamic and hormonal changes between the head-down and the supine positions. However, the tendency of decreased end-diastolic volume and increased cardiac contractility during the later period of 2 hr showed that the cardiovascular adaptation could be accelerated within a relatively short period in the head-down bedrest. During the head-up tilt, presyncopal signs were developed in five subjects of the supine bedrest, and one of the same subjects of the head-down bedrest. In the tolerant subjects, the increase in cardiac contractility and plasma epinephrine level during the bend-up tilt was greater following the head-down bedrest than that following the supine bedrest to compensate for reduced venous return. The intolerant subjects showed the greater decrease in end-diastolic and stroke volume, and the greater increase in heart rate during the head-up tilt than the tolerant subjects. Cardiac contractility and plasma epinephrine level were remarkably increased. However, arterial pressure was not maintained at the level for the appropriate compensation of the reduced venous return. It seems that the tolerance to orthostasis is more effective after the short-term head-down bedrest than after the supine bedrest, and the secretion of epinephrine induces the higher cardiac performance as a compensatory mechanism fur the reduced venous return during the orthostasis following the head-down bedrest than the supine bedrest.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.587-588
• /
• 2013