• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.1147-1158
• /
• 2020

The purpose of this study was to measure the engine torque and rotational speed of a 67 kW class agricultural tractor according to tire type during plow tillage and to analyze the gear strength of the driving shift for the tractor. A field test was performed under the condition with a single tire (Test A) and dual tires (Test B) to increase the ground width of the rear tires. A load monitoring system was developed, and the engine torque and rotational speed were measured using controller area network (CAN) communication. The engine torque and rotational speed during plow tillage were calculated as the equivalent torque and speed using Palmgren Miner's rule. As a result, the equivalent torque and speed in Test A and Test B were 181.0 Nm and 1,913 rpm and 206.1 Nm and 2,130 rpm, respectively. As the ground width of the rear tire was increased, the bending stress in Test B was about 9.9 to 10.5% higher than that of the Test A, and the contact stress was about 4.6 to 4.9% higher than that of the Test A. Under all conditions, the safety factor for the bending and contact stress was 1 or more. Thus, the driving shift gears for the dual tire type are considered safe.

• Weed & Turfgrass Science
• /
• v.2 no.3
• /
• pp.322-326
• /
• 2013

This study was tried to control the weedy rice using minimum tillage direct seeding of rice on dry paddy. Minimum tillage direct seeding on dry paddy is tilled with 4 cm in width at 27 cm intervals by 1-shaped rotary blade. Using this cultivation method can control weedy rice effectively by minimizing the soil disturbance. In this study, weedy rice was firstly emerged at April 28 in 2012. After 11 days emergence rate of weedy rice at May 9 was 61.9%. At this time rice was sown and then herbicides was treated at 10 and 15 days after sowing. When herbicides was treated at 10 days after sowing the control effect was 89-96%, and when treated at 15 days the control effect was 97-99%. However emergence of weedy rice differ according to the year and year. It was thought to be affected by April average temperature and total precipitation. So, for effective weedy rice control and stable rice yield, it was considered that irrigation at April 15-20 to induce the emergence of weedy rice is required.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.2
• /
• pp.69-73
• /
• 2008

Fields experiments were conducted to investigate the effect of various tillage depth (TD) on productivity and quality of C. auriculatum Royle ex Wight from 2005 to 2006. The length of vine was elongated in lower TD treatments as 50 cm longer in 10 cm TD than 30 cm TD, and stem diameter and dry weight had increased in the lower TD. Length, width, and weight of leaves showed the quantitive growth in the lower TD treatments, but the chlorophyll content had increased in the deeper TD treatments. Root number and length had increased in the deeper TD treatments, but the root diameter and decomposed root was increased in the deeper TD. The total yield of root showed the increasing tendency in the deeper TD treatments as 6.2 ton/ha in 10 cm TD and increased as $7{\sim}9%$ in the 20 cm TD treatments.

• Weed & Turfgrass Science
• /
• v.3 no.4
• /
• pp.318-322
• /
• 2014

The effects of cover crops on weed suppression were evaluated in this study. Weed suppressing effects of hairy vetch cover crops were evaluated in summer grain fields. Cover crops were sown at the sowing rate of $60kg\;ha^{-1}$ on Oct. 2012 and Feb. 2013 without basal fertilization. Three weeks old sorghum seedlings were transplanted after minimum tillage on June 2013. Hairy vetch cover crop treatment significantly reduced weed biomass in the transplanted sorghum. By smothering, the cover crops reduced weed biomass to economic level in sorghum. Besides the weed suppression, hairy vetch cover crop resulted in green manure effect on crop growth. Hairy vetch treatment showed beneficial effects on sorghum growth. Reduction of weeds caused by use of strip-tillage machine and polyethylene film mulching was 71% and 88%, respectively. At harvest, yield of sorghum was greater in order of polyethylene film mulching > hairy vetch cover crop > control in transplanted fields.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.6
• /
• pp.367-375
• /
• 2003

The aim of this study was to investigate the soil physical properties and the traction characteristics of paddy field before tillage by a computer simulation. Soil physical properties, such as soil moisture content, bulk density, soil hardness, and soil texture were measured in the twelve rice production area. Mathematical model based on dimensional analysis which include soil physical properties and vehicle factors was used for the computer simulation. Most of the soil texture of the investigated area was silty loam, loam and silty clay loam. Soil moisture content ranged between 20 and 40% mostly. Soil bulk density was in the range of 1,500 to $1,700kg\;m^{-3}$. Soil hardness ranged between 2 to $12kg\;cm^{-2}$ mostly. Soil hardness incorporates the effects of many soil physical properties such as moisture content, texture and bulk density, and so the range of soil hardness was greater than that of any other physical properties. The predicted net traction was in the range of 70 to 1,500 kgf depending on the area, but it was above 1,000 kgf for most of the investigated area. Thus it was concluded that 50 HP tractor can pull the four row moldboard plow considering the conventional tillage depth and width. But for the soft soil area such as Andong and Namyang, tractor itself may have mobility problem and show high slip during plowing operation.

• Korean Journal of Weed Science
• /
• v.17 no.1
• /
• pp.124-134
• /
• 1997

As control of plant diseases, insects and weeds were heavily relied on pesticides, residues of pesticides in environment and food supply were recently focused by environmentalists and consumer groups. The reduction of pesticide use was implemented in Sweden, Denmark, Netherland, England, and United States. Therefore, it is very important to discuss environmentally sound systems of weed management including cultural, mechanical, and integrated weed control. Mechanical methods using tillage, cultivation, mulching, burning, mowing, solarization, and UHF are used as one of most effective environmentally sound weed management systems. Cultural practices favoring the crops are excellent weed management measures. Correct seedbed preparation for the soil and cultural system, and use competitive cultivars contribute to weed management. Increasing crop density by higher seeding rate or by narrowing row width and careful attention to optimum fertility to produce vigorous crop plants increase competitiveness of crops against weeds. Crop rotation breaks life cycles of weeds by alternating the crop it must associate with. Herbicides are efficient and profitable to control weeds, but must be part of a total weed management program with use of minimum rate. The best weed management will be an integrated approach including two or more methods to manage weed problems.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.3
• /
• pp.127-133
• /
• 2005

The measurement technique using laser distometer to estimate soil erosion on sloped upland was assessed for its possibility for application. This technique was practiced in lysimeter installed in Chuncheon and Pyeongchang in 2001. The lysimeter installed at Chuncheon has 12% slope, 10 m slope length, 2 m width, and soil texture was sandy loam, while the lysimeter installed at Pyeongchang showed 23% slope, 15 m slope length, 5 m width, and sandy loam soil. Change of surface soil height was monitored using laser distance meter before and after rainy season on same spots. The Investigated periods in Chuncheon and Pyeongchang were from 22 June to 22 September and from July to October, respectively. Precipitation in Chuncheon and Pyeongchang in this period was 892.2 and 931.9 mm, respectively. Rainfall over 60% of annual precipitation was concentrated on July and August in Chuncheon and September and October in Pyeongchang, respectively. By monitoring the change of surface soil height using laser distance meter before and after rainy season, eroded soil surface in up-down fallow field in Chuncheon was 0.874 cm, while eroded soil surface in slant furrow field in Pyeongchang was 1.127 cm, which correspond to 79.5 and $98.0MT\;ha^{-1}$. Soil erosion increased as furrow length increased. Amounts of estimated soil loss using laser distance meter was 0.98-1.18 times higher compared to the estimated values through Iysimeter experiment, which implies possibility for application to monitor soil loss particularly in up-down and slant furrowed field. However, in the lysimeter with contoured tillage, amount of estimated soil loss using laser distance meter was approximately a half compared to that from lysimeter experiment, which implies inadequacy of distance meter application in contour- tillage field. The great soil loss difference between distance meter and lysimeter might be caused by disruption of some of the contoured furrows in lysimeter. The measurement technique using distometer in this study could be useful to estimate soil loss especially in up-down and slant-tillage fields.

• Korean Journal of Agricultural Science
• /
• v.13 no.1
• /
• pp.103-112
• /
• 1986

This study was carried out to prevent the entwining of rice straw on rotary shaft and blade where rice straw was spreaded on paddy field as an organic source before rotary tilling. The rotary tillage was conducted in the paddy field having the soil moisture contents of 30%, 39%, 59% in dry basis and spreaded rice straw (450kg/10a) of 30cm, 45cm, 90cm length with the edged curve angles of rotary blade of $30^{\circ}$, $40^{\circ}$, $50^{\circ}$, $55^{\circ}$ at Yuseung area. And the test were performed on the plot which has width of 30cm and 5cm length and the quantity of entwined rice straw was analized. The test results were summarized as the followings. 1. Entwining phenomenon of rice straw was decreased as the blade edged curve angle increased. The edged curve angle of rotary blade must be determind by considering the characteristics of soil cutting resistance, tilling torque and entwining phenomenon of rice straw. But according to the entwining phenomenon of rice straw only, the edged curve angle of rotary blade should be bigger than $55^{\circ}$ for design. 2. Amount of entwining rice straw was minimized when soil moisture contents was 30 percent (d. b.). It would be better that rotary tillage is performed when soil moisture contents is lower than 30 percent in dry basis. 3. Amount of entwining rice straw was minimized when the length of rice straw was 30cm with $55^{\circ}$ edged curve angle. Therefore, it would be better to chop rice straw as 30cm. 4. Entwining phenomenon of rice straw was decreased as the forward speed decreased. To decrease the entwining rice straw, rotary tillage should be done with forward fist gear (0.35m/s).

• Korean Journal of Agricultural Science
• /
• v.5 no.2
• /
• pp.149-157
• /
• 1978

This study was carried out to obtain basic data for the type selection of furrow openers for the no-tillage soybean planter trailed by the two-wheel tractor from the standpoint of minimum draft and good performance of furrowing. For this study, two models of furrow opener, hoe and disc type, were tested on the artificial soil stuffed in the moving soil bin. The results obtained were as follows. In the case of disc furrow opener, the drafts were measured according to various diameters of discs under the condition of disc angle $8^{\circ}$ and $16^{\circ}$, working depth 3cm and 6cm, working speed 2.75cm/sec. Minimum draft appeared when the diameter of disc was about 28cm and the drafts increased as the diameter of discs became larger or smaller than this diameter. Specific draft showed almost same tendencies as above but showed the minimum when the diameter was about 30cm. For the purpose of controlling the seeding depth, the relationships between draft and working depths, 3cm and 6cm, were tested. The variations of draft concerning the various working depths showed linear changes and were affected in higher degree by depths than other factors. There were general tendencies at both working depths, 3cm and 6cm, that total draft showed the minimum with the disc diameter of about 28cm and specific draft showed it with the disc diameter of about 30cm regardless of disc angle and working speed. For the purpose of controlling the working width and speed, the relationships among drafts, disc angle and working speed were investigated and there were general tendencies that the draft increased as the angle and speed were increased and the draft was affected more by speed than by angle. To compare the hoe-type with disc-type opener, the specific drafts of hoe openers were compared with those of disc opener of $16^{\circ}$ angle and 30cm diameter. The specific draft of disc-type opener with the diameter of 30cm was $0.35{\sim}0.5kg/cm^2$, while $0.71{\sim}1.02kg/cm^2$ in the case of hoe type with the lift angle of $20^{\circ}$ which is 2 times as much as that of disc type in average value. And the furrows opened by disc openers were cleaner than those opened by hoe openers.