• Journal of the Korean Society of Safety
• /
• v.6 no.4
• /
• pp.53-57
• /
• 1991

Engineers of building construction have made efforts to produce more convinient building of good quality through the development of technology and raw materials nowadaye. This study is conducted to recognize problems of exterior tiles through experiments on quality of tiles according to sizes, and to find out and Iecommend most suitaff sizes of tiles. The sizes which are used widely in Construction field are selected as,45$\times$45mm, 57$\times$87mm, 60$\times$108mm, 60$\times$187mm, 96$\times$200mm. Ready mixed compound are used as mortar and Compressed attachment method are used.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.3
• /
• pp.262-269
• /
• 2006

Formaldehyde and total volatile organic compounds (TVOC) from building materials have been known as main causes of IAQ problem in Newly-Constructed Multi-Family Houses. Because Multi-Family Houses are built in large quantities in a similar manner, inappropriate selection of building materials and method will detrimental affect IAQ. This research aims to identify major causes of Indoor Air Pollutants in Multi-Family Houses, by constructing Mock-Up & One-Room House. As a result, self leveling concrete, door, and furniture construction is a major cause of indoor formaldehyde increase, and tile bond is TVOC, and urethane water proof is Etylbenzene, and Xylene.

• Resources Recycling
• /
• v.16 no.2 s.76
• /
• pp.12-16
• /
• 2007

The influence of oxidation on the floatability of sulfide minerals contained in mine failings has been investigated employing chalcopyrite as a target material. The critical surface tension of chalcopyrite was estimated to be about 15.5 dyne/cm based on Zisman plot and the floatability of chalcopyrite was observed to increase with the concentration of collector. The enhanced float-ability of chalcopyrite at its initial stage of oxidation was considered to be due to the transformation of disulfide to elemental sulfur and the decrease in its floatability at further oxidation was presumably caused by the formation of sulfate and/or disulfur trioxide from elemental sulfur. When the oxidized chalcopyrite was reduced, its floatability was increased and the variation of the critical surface tension of chalcopyrite according to tile oxidation/reduction was interpreted by an energy diagram constructed by different bond energies between atoms.

• Polymer(Korea)
• /
• v.28 no.2
• /
• pp.170-176
• /
• 2004

The effect of reaction conditions on the size and size distribution of superparamagnetic iron oxide coated with siloxane was big investigated by using dynamic light scattering. The hydrogen bond between the hydroxyl groups on tile surface of the magnetite and silanol was confirmed by FT-IR. The size of nanoparticles increased with the reaction temperature, but decreased with monomer contents and agitation speeds. There was not a big difference in size of nanoparticles, prepared by different reaction conditions, but its distribution was in the range of 14∼41nm. All samples exhibited the superparamagnetic nature. The magnetic susceptibility of the nanoparticles increased with the reaction temperature while it decreased with the monomer content and agitation speed.

• 보존과학연구
• /
• s.35
• /
• pp.57-71
• /
• 2014

As results of this study about the restoration and production techniques of the ridge-end roof tiles excavated from middle gate site in Bunhwangsa Temple, the ridge-end tile was considered that can be combined with four distinguished parts such as a body with upper and lower portions, a back, a belly, and a wing. And also some patterns can be verified. The body and the wing were piled up the coil clay and the back-side was bonded. The pileup process was assumed that three types of wood tools were applied to bond the facing surfaces. After the completion of the pileup process, the entire exterior was retouched by hand. For touching the inside, bare hands or some tools like a wooden branches were used to scratch and to re-face a clay plasterwork. And also, the stamped patterns which produced by framework were bonded to the body. The results from the XRD and the TG-DTA, Tridymite which shows the phase transition in more than $867^{\circ}C$ could not be identified, and also the endothermic reaction peak at $1063^{\circ}C$ showed the result that the alkali feldspar such as the albite was changed into a different mineral at $1050^{\circ}C$. Therefore, the ridge-end tiles can be considered that the firing temperature was below $867^{\circ}C$.

• The Korean Journal of Pesticide Science
• /
• v.4 no.3
• /
• pp.34-39
• /
• 2000

A new fifteen 2,3-dihydro-2-ethyl-2,4,6,7-tetramethylbenzofuran-5-yl substituents in 5-benzofuryl-2-[1-(alkoxyimino)alkyl]-3-hydroxycyclohex-2-en-1-one derivatives as substrate were synthesized and their herbicidal activities against rice plant (Oryza sativa L.) and barnyard grass (Echinochloa crus-galli) with post emergence were measured under submerged conditions. The $R_{1}$=methyl substituents, $1{\sim}8$ showed the higher herbicidal activity to the rice plant and barnyard grass. The structure-activity relationships (SARs) on tile herbicidal activity of $R_{1}$ and $OR_{2}$ groups on the azomethine bond in substrates were analysized. From tile results of dicussed SAR, the herbicide activities against rice plant would depend largely on the steric factor, Whereas, in case of barnyard grass, the activities were governed by the hydrophobicity factor. The conditions of selective herbicide activity between the two plant species are assumed that the substrates should nave optimal hydrophobicity ( $(logP)_{opt.}=6.0$), a $R_{1}$ groups of small and a long $OR_{2}$ groups.