• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.2
• /
• pp.84-96
• /
• 2001

Test data for a naval vessel is massive, expensive and impossible to be retested in a underwater acoustic measurement on the same condition. So, it is very important. In this paper, I mention massive underwater acoustic multimedia database system that was developed to store a long time, manage systematically, supply raw data and analyze data to user in 2-tier structure. Also, I propose 3-tier structure to extend the current database system that can supply multimedia data.

• Journal of Biosystems Engineering
• /
• v.32 no.3
• /
• pp.173-178
• /
• 2007

This research was conducted to develop and analyze a wireless monitoring system for judging if sick or dead layers (SDL) exist in multi-tier layers battery (MLB) by machine vision, and to evaluate the performance between a wired monitoring system and it. This study used the AP (Access Point), the RS-285 to RS-232 converter, RS-232 to Ethernet converter, PICBASIC board and upgraded lump image processing method to change wired monitoring system into wireless monitoring system. The system was tested at a pilot farm and farm layer house. Results showed that monitoring judgement success rate at a pilot farm on normal cage (without SDL) was 82.3% and that on abnormal cage (with SDL) was 87.5%, respectively. And communication performance test results showed at farm layer house was $700{\sim}900$ kbps while equipments operated. There were dropped slightly than performance of wired monitoring system, however, the quantity was too small to make a significant difference of performance of the controling system developed for wireless communication.

• Journal of Communications and Networks
• /
• v.13 no.6
• /
• pp.664-677
• /
• 2011

In order to control interference and improve spectrum efficiency in the femtocell and macrocell overlaid system (FMOS), we propose a joint frequency bandwidth dynamic division, clustering and power control algorithm (JFCPA) for orthogonal-frequency-division-multiple access-based downlink FMOS. The overall system bandwidth is divided into three bands, and the macro-cellular coverage is divided into two areas according to the intensity of the interference from the macro base station to the femtocells, which are dynamically determined by using the JFCPA. A cluster is taken as the unit for frequency reuse among femtocells. We map the problem of clustering to the MAX k-CUT problem with the aim of eliminating the inter-femtocell collision interference, which is solved by a graph-based heuristic algorithm. Frequency bandwidth sharing or splitting between the femtocell tier and the macrocell tier is determined by a step-migration-algorithm-based power control. Simulations conducted to demonstrate the effectiveness of our proposed algorithm showed the frequency-reuse probability of the FMOS reuse band above 97.6% and at least 70% of the frequency bandwidth available for the macrocell tier, which means that the co-tier and the cross-tier interference were effectively controlled. Thus, high spectrum efficiency was achieved. The simulation results also clarified that the planning of frequency resource allocation in FMOS should take into account both the spatial density of femtocells and the interference suffered by them. Statistical results from our simulations also provide guidelines for actual FMOS planning.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.2
• /
• pp.136-142
• /
• 2002

In this thesis. we present the cyber lecture system based on XML that uses the communication network as the 100Mbps LAN. The system was designed to analysis the existing cyber lecture system and its details arid to examine web system architecture and XML 3-tier model The result of the study consists of he cyber lecture system based on XML developed on 100Mbps LAN to improve method of the cyber lecture system by using ma 3-tier model arid utilisation of web interface to offer handiness of the cyber lecture system.

• Journal of Bio-Environment Control
• /
• v.32 no.2
• /
• pp.132-138
• /
• 2023

The Gymnocalycium mihanovichii has been an important export item of Korean flower industry for a long time. Although there is a high demand for grafted cactus from overseas, its production for export is limited. In this study, the growth and marketable yield characteristics of Gymnocalycium mihanovichii 'I-Hong' were compared between soil culture and ebb-and-flow hydroponic system with single- or double-tier bench. As a result, hydroponic methods with single-tier bench resulted in higher fresh weight and glove diameter compared to other cultivation methods. In the ebb-and-flow hydroponic system, hydroponic system with double-tier bench of grafted cactus traits has a lower growth rate than other cultivations. However, the hydroponic system with double-tier bench of grafted cactus significantly increased the yield. In conclusion, the yield from hydroponic system with double-tier bench was better than soil cultivation method. Although there were some differences in color depending on the cultivation method, it was considered that there was no difference in appearance of Gymnocalycium mihanovichii 'I-Hong'. Our results suggest the cultivation methods to overcome production constraints, expand their exports, and improve the value-added characteristics of grafted cactus.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1725-1733
• /
• 2012

This paper describes the design and implementation of a 3-tiered proxy driving system utilizing smartphones. This system provides customers with a convenient request facility, and enables proxy drivers to provide a prompt service based on customer's location information. Implemented system supports two methods such as the existing phone-call and the online requesting method using smartphones. Performance analysis shows that the higher the ratio of online requests, the greater the effect of decreasing of phone jockey's workloads and the reduction of request processing time through the automation of receipt and processing. From a proxy driver company's standpoint, this system minimizes the increase of phone jockeys, and improves customer satisfaction through good service quality. This system also helps the company reduce the cost and increase the market share.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.2
• /
• pp.1-9
• /
• 2012

In this paper, we design and implement a DCS (Distributed Control System) based on dual field-bus for ship engine. For monitoring and controlling the condition of the ship engine, an implemented DCS is consisted of two-tier communication structure by using CAN (Controller Area Network) and MODBUS protocols. The first-tier is consisted of CAN protocol for sharing the condition of the ship engine by each implemented monitoring system. By using MODBUS protocol, the second-tier is used for communicating the monitoring data from an implemented DCS to AMS(Alarm Monitoring System). We verified and tested our scheme and implemented DCS by KR (Korea Register) technical rules through experimental tests.

• Journal of Climate Change Research
• /
• v.4 no.3
• /
• pp.235-244
• /
• 2013

Carbon dioxide emission estimation methods consist of four tiers according to the IPCC guideline. In this study, estimated results by tier 3 and tier 4 were compared with the theoretically calculated $CO_2$ emissions based on the mass balance approach for a gas fired power plant between March and May 2011. It was found that the relative differences were upto 17% between the measured emissions by tier 4 and theoretically estimated emissions, while the results of tier 3 were similar to those from theoretically estimated ones. The comparisons suggested the possibility of misestimation due to replacing missing, abnormal, or invalid data in continuous emissions monitoring system. When using only the data without those missing, abnormal, or invalid data, the relative differences decreased somewhat but still showed consistent differences depending on the stack. It is suggested that this differences might be due to the accuracy of the measurement instruments for the tier 4, especially, for the flow rate measurement instrument.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.217-224
• /
• 2012

In general, transportation sources include both on-road vehicles and off-road equipment. Off-road vehicles have usually used diesel engines, which have the disadvantage of high NOx emission. Common rail direct injection (CRDI) and after-treatment systems have been applied to meet the exhaust gas emission regulations for diesel vehicles. In the present, agricultural machinery has satisfied the Tier 3 emission regulations by using waste gate turbocharger (WGT) and internal exhaust gas recirculation (EGR). In this paper, the combustion and emission characteristics of an EGR system applied to a 56kW off-road vehicle in non-road transient cycle (NRTC) mode have been investigated. The EGR map was made from foundation experiments determining the EGR duty for all engine operating conditions, and then this map was applied to the NRTC mode. Consequently, the NOx emission was reduced by the EGR system, and the Tier 4 interim emission regulations were satisfied by using both the EGR system and an after-treatment system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2014-2034
• /
• 2015

This paper focuses on solving co-channel interference (CCI) issues arising in the open subscriber group (OSG) mode of heterogeneous networks (HetNets). Considering a general framework consisting of arbitrary number of picocells within a macro cell, where the inter-user interference (IUI) is the main CCI to macro user equipments (UEs), while the the inter-cell interference (ICI) is the major CCI to pico UEs. In this paper, three IA based transceiver design schemes are proposed. For macro cell, we uniformly use block diagonalization (BD) scheme to eliminate the IUI. And for picocells, three IA schemes are proposed to mitigate the ICI. The first scheme, named as zero forcing IA (ZF-IA) scheme, aligns the inter picocell interference onto an arbitrary sub-space of the cross-tier interference using ZF scheme. Considering the channel state information (CSI) of the desired channel of pico UEs, the second scheme, named as optimal desired sub-channel selected IA (ODC-IA) scheme, aligns the inter picocell interference onto a certain sub-space of the cross-tier interference, which guarantees the largest channel gain of the desired signal of pico UEs. The third IA scheme, named as maximum cross-tier interference selected IA (MI-IA) scheme, is designed for the system with less receive antennas. The inter picocell interference is aligned onto the space of the strongest cross-tier interference and only the interference on this space is nullified. The complexity analysis and simulations show that the proposed transceiver design schemes outperform the existing IA schemes in the OSG mode of HetNets, and the MI-IA scheme reduces the requirement of the receive antennas number with lower complexity.