• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.241-246
• /
• 2000

In the strut-tie model design of structural concrete, the importance of the effective strength of concrete strut has been overlooked by many practitioners. The authors believe that the effective strength of concrete strut is an important factor not only in determining steel tie forces but also in verifying the nodal zone strength and geometric compatibility condition of a selected strut-tie model. This study evaluate the effect of the effective strength of concrete strut on structural concrete design by applying the different effective strut strengths to the strut-tie model design of a post-tensioned anchorage zone and a continuous concrete deep beam.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.235-240
• /
• 2000

Although dapped-end beams are widely used in bridge and building structures, there are not any specific and reasonable design regulations on dapped-end beams. In this study, the validity of the suggested experimental and empirical design methods, conventional strut-tie model approach, and nonlinear strut-tie model approach is evaluated through the analysis of dapped-end beams tested to failure. The nonlinear strut-tie model approach proved to be the most suitable method for dapper-end beam design.

• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.345-356
• /
• 2008

In the previous study, direct inelastic strut-and-tie model (DISTM) was developed to perform inelastic design of reinforced concrete members by using linear analysis for their secant stiffness. In the present study, for convenience in design practice, the DISTM was further simplified so that inelastic design of reinforced concrete members can be performed by a run of linear analysis, without using iterative calculations. In the simplified direct inelastic strut-and-tie model (S-DISTM), a reinforced concrete member is idealized with compression strut of concrete and tension tie of reinforcing bars. For the strut and tie elements, elastic stiffness or secant stiffness is used according to the design strategy intended by engineer. To define the failure criteria of the strut and tie elements, concrete crushing and reinforcing bar fracture were considered. The proposed method was applied to inelastic design of various reinforced concrete members including deep beam, coupling beam, and shear wall. The design results were compared with the properties and the deformation capacities of the test specimens.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.11 no.1
• /
• pp.5-11
• /
• 2000

Background and Objectives : Tongue-tie, or partial ankyloglossia, is manifested by an abnormally short and thick lingual frenulum. Degree of tongue-tie varies from the mild to the rare, severe and its treatment of choice is frenulotomy. Theoretically tongue-tie can affect expression of alveolar sounds. The purpose of this study is to evaluate the degree of articulation problem and to evaluate the efficacy of frenulotomy itself on alveolar sounds in tongue-tie patients. Materials and Methods : Prospectively, the authors performed preoperative and postoperative speech evaluation using picture consonants test for tongue-tie patients. Percentage of consonants correct(PCC), mean value of each alveolar phoneme depends on articulation site were evaluated. for exclusion of other articulatory improving factors except of frenulotomy itself, postoperative picture consonants test was performed 1 month after surgery. Results : Preoperative speech evaluation was performed to 37(male 21, female 16) patients and postoperative speech evaluation was performed to 17(male 9, female 8) patients, the other 20 patients were follow-up loss. Low PCC was observed in tongue-tie patients and PCC of female was higher an at of male in 2-4 years old patients. Overall PCC was improved after frenulotomy. Preoperative mean value of liquids and fricatives was lower than the other alveolar phonemes(p＜0.05) and it was improved postoperatively(p＜0.05). Conclusion : Frenulotomy itself can improve the articulation of liquids and fricatives on short follow-up. Speech therapy would be needful for improvement of the other alveolar phonemes.

• Journal of the Korean Society of Costume
• /
• v.23
• /
• pp.169-181
• /
• 1994

The Purpose of this study is to help the neck-tie business enterprise establish the reasonable marketing strategy meeting consumer' needs by grasping their characteristic of purchasing neck-ties and their attitudes toward trademarks. The findings of this study are as follows : 1. It was shown that the neck-tie enterprise tended to appeal to megazines, catalogues , etc as promotional politics, while the tips obtained by consumers would come from the showcase at the purchasing place. and the consumer showed a positive response to the salesperson's advice. For this result, it is required to place further emphasis on the marketing policy such as the display of products at the store or the education of sales persons. 2. It was shown that the consumer tended to use the department store as the purchasing place remarkably, and so it could be found that the use of the department store is becoming generalized to the consumer. But is was shown that the consumer sensitive to prices tended to make use of the marketplace as the purchasing place, so the practical marketing strategy should be established in relation to this trend. 3. The important elements excreting an influence on the consumer's purchasing the neck-tie were shown to be in orders of design > color> harmony > with suit > price > quality, and the product differentiation policy used by the business enterprise to appeal to the consumer was shown to be in orders of design >color > quality > material > price. Accordingly , it was consistent with the consumer's criterion for choice to an extent. 4. It was shown that the selling price for the neck-tie brand actually was higher for imported or technically cooperated brands than for the home-made brand. Thus, the consumer's perception of the price for the neck-tie was consistent with in this regard, consumers did not feel some difference in quality between the home -made neck-tie brand and the imported or technically cooperated neck-tie brand . Therefore, it is important to produce the product capable of satisfying the consumer's need by manufacturing the own brand on basis of impored technology.

• Archives of Plastic Surgery
• /
• v.40 no.3
• /
• pp.259-262
• /
• 2013

After skin grafting, to prevent hematoma or seroma collection at the graft site, a tie-over dressing has been commonly used. However, although the conventional tie-over dressing by suture is a useful method for securing a graft site, refixation is difficult when repeated tie-over dressing is needed. Therefore, we recommend a redoable tie-over dressing technique with multiple loops threads and connecting silk threads. After the raw surface of each of our cases was covered with a skin graft, multiple loop silk thread attached with nylon at the skin graft margin. We applied the ointment gauze and wet cotton/fluffy gauze over the skin graft, then fixed the dressing by connecting cross-counter multiple loop thread with connecting silk threads. When we opened the tie-over dressing by cutting the connecting silk threads, we repeated the tie-over dressing with the same method. The skin graft was taken successfully without hematoma or seroma collection or any other complications. In conclusion, we report a novel tie-over dressing enabling simple fixation of the dressing to maintain proper tension for wounds that require repetitive fixation. Further, with this reliable method, the skin grafts were well taken.

• Archives of Plastic Surgery
• /
• v.45 no.3
• /
• pp.266-270
• /
• 2018

Background Skin grafting is a commonly performed operation in plastic and reconstructive surgery. The tie-over dressing is an effective technique to secure the grafted skin by delivering persistent downward pressure. However, if an additional dressing is required due to incomplete graft healing, the process of re-implementing the tie-over dressing may be frustrating for both patients and surgeons. Therefore, we introduce the double tie-over dressing, which readily allows for an additional tie-over dressing after the first dressing, and we present a comparison of its effectiveness with that of the simpler bolster dressing. Methods Of 128 patients with a skin defect, 69 received a double tie-over dressing and 59 patients received a simple bolster dressing. Using the independent t-test, the mean healing time, which was defined as the mean time it took for the wound to heal completely so that no additional dressing was required and it was washable with tap water, was compared between the 2 groups in both the head and neck region and in other areas. Results The mean healing time for the head and neck region in the double tie-over dressing group was $9.19{\pm}1.78days$, while it was $11.05{\pm}3.85days$ in the bolster dressing group. The comparison of the 2 groups by the independent t-test revealed a P-value of 0.003 for the mean healing time. Conclusions In the head and neck area, the double tie-over dressing required less time to heal than the simple bolster dressing.

• Development and Reproduction
• /
• v.27 no.2
• /
• pp.91-99
• /
• 2023

The sea cucumber, Apostichopus japonicus, is one of the most valuable aquatic species. The color of body wall and appearance are important for the value of sea cucumbers. To examine expression pattern of long-chain acyl-coenzyme A dehydrogenase (LCAD), nuclear distribution C-containing protein 3 (NUDCD3), and receptor tyrosine kinase Tie-1 (TIE1), previously reported as differently expressed genes during the pigmentation of sea cucumber, we analyzed the temporal profiles of LCAD, NUDCD3, and TIE1 mRNAs in LED-exposed and light-shielded A. japonicus. Real-time quantitative PCR revealed that the LCAD, NUDCD3, and TIE1 mRNAs from the juveniles at 40-60 days post-fertilization (dpf) exhibited increasing patterns as compared to those of an early developmental larva (6-dpf). At 60-dpf juveniles, the LCAD and TIE1 mRNA levels of LED-exposed individuals were higher than those of light-shielded ones, whereas at 40-dpf and 50-dpf juveniles, the NUDCD3 mRNA expression was higher in the light-shielded condition (p<0.05). In the pigmented juveniles (90-dpf), the LCAD and TIE1 mRNA levels tended to show higher levels in red individuals than those in green ones, but there was a conversely higher level of NUDCD3 mRNA in green larva. In situ examination of LCAD and NUDCD3 mRNAs in light-shielded 6-dpf larva revealed that both genes are mainly expressed in the internal organs compared to the body surface. Together, these results may provide insights into the differential gene expression of LCAD, NUDCD3, and TIE1 during pigmentation process of the sea cucumber.

• Korean Journal of Bronchoesophagology
• /
• v.2 no.1
• /
• pp.125-128
• /
• 1996

Tongue tie is the congenital anomaly which is manifested by an abnormally short and thick lingual frenulum so that a condition outside of the range of normal anatomic or functional capability. In general, the surgical correction is the treatment of choice: release of tongue tie and closure. We compared the traditional frenotomy with laser frenotomy using Nd：YAG laser to treat 67 cases of tongue tie during a period of JAN. 1993 through Feb. 1996. The advantages of laser frenotomy were decreased blood loss and operation time. So we had a conclusion as the adequate use of laser frenotomy with suture was a good surgical procedure for correction of tongue tie.

• Computers and Concrete
• /
• v.12 no.3
• /
• pp.243-259
• /
• 2013

Recent developments in Artificial Intelligence (AI) and computational intelligence have made it viable in the construction industry and structural analysis. This study usesthe Adaptive Network-based Fuzzy Inference System (ANFIS) as a modelling tool to predict the strain in tie section for High Strength Self Compacting Concrete (HSSCC) deep beams. 3773 experimental data were collected. The input data andits corresponding strains in tie section as output data were recorded at all loading stages. Results from ANFIS are compared with the classical linear regression (LR). The comparison shows that the ANFIS's results are highly accurate, precise and satisfactory.