• Journal of Korean Foot and Ankle Society
• /
• v.9 no.2
• /
• pp.135-139
• /
• 2005

Purpose: This study was performed to investigate the radiological characteristics of the degenerative arthritis of the ankle using the standing radiographs. Materials and Methods: From June 2001 to May 2005, 36 patients (56 ankles) who were treated for osteoarthritis of ankle were analysed. Angle of tibial shaft and tibial joint surface on AP view (TSA), angle of tibial joint surface on lateral view (TLS), tibial and medial malleolus angle (TMM) and talo-1st metatarsal angle were checked on standing radiograph. The patients with medial joint and total joint involvement were categorized into three stages according to the location of involvement. The degree of joint space narrowing was categorized into two groups. Results: There were no significant differences in TSA, TLS, TMM and talo-1st metatarsal angle with regard to the stage of arthritis. However, the difference between the less severe group and the severe group existed. Conclusion: Angular deformity was not correlated with stage, but correlated with severity. The deformity of distal tibial articular surface does not seem to be a cause of primary osteoartiritis, but rather a result from it.

• Physical Therapy Korea
• /
• v.8 no.3
• /
• pp.1-10
• /
• 2001

The purpose of this study was to compare the static pressure, dynamic pressure, dynamic pressure-time integral, relative impulse, and contact time between the sound lower limb and amputated lower limb in trans-tibial amputee subjects using Parotec system. Seventeen trans-tibial amputee subjects wearing endoskeletal trans-tibial prosthesis voluntarily participated in this study. The results were as follows: 1) In static standing condition, there were significantly higher static pressure in sound lower limb insole sensor of 10, 14, 15, 18, 19, 23, and 24 and in amputated lower limb insole sensor of 9, 12, and 16 (p<.05). 2) In dynamic gait condition, there were significantly higher dynamic pressure in sound lower limb insole sensor of 2, 18, 22, 23, and 24 and in amputated lower limb insole sensor of 5, 9, 10, 11, 12, 14, 15, and 16 (p<.05). 3) In dynamic gait condition, there were significantly higher pressure-time integral in sound lower limb insole sensor of 2, 4, 18, 19, 20, 21, 23, and 24 and in amputated lower limb insole sensor of 5, 11, 12, and 15 (p<.05). 4) In dynamic gait condition, there were significantly higher relative impulse in sound lower limb insole sensor of 18, 19, 20, 22, 23, and 24 and in amputated lower limb insole sensor of 5, 9, 10, 11, 12, and 15 (p<.05). 5) In dynamic gait condition, there was significantly higher percentage of contact time in push off phase of sound lower limb and in support phase of amputated lower limb (p<.05). These results suggest that trans-tibial amputee subjects had characteristics of shortened push off phase due to unutilized forefoot and of lengthened support phase with higher pressure in the midfoot.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.1005-1006
• /
• 2010

• Animal Bioscience
• /
• v.35 no.12
• /
• pp.1940-1947
• /
• 2022

Objective: This study examined the effects of dietary calcium (Ca) and non-phytate phosphorus (NPP) on performance, tibial characteristics, meat quality and plasma biochemical variables in yellow-feathered broilers during 85 to 105 d of age. Methods: A total of 720 heads of 85-d broilers were allocated into 9 groups and provided with three levels of Ca (0.65%, 0.75%, 0.85%), and NPP (0.25%, 0.30%, 0.35%) in diets for 21 d. Results: The final body weight (FW), average daily gain (ADG), average daily feed intake (ADFI), and feed to gain ratio (F:G) were affected (p<0.05) by dietary Ca. From the quadratic regressions, the optimal level of Ca in diet were 0.71% for FW and ADG, and 0.67% for ADFI. Dietary Ca and NPP both significantly affected tibial breaking strength and density. From the quadratic regressions, the optimal level of Ca and NPP in diet were 0.81% and 0.37% for tibial density. The shear force of breast muscle of broilers given 0.75% or 0.85% Ca were lower than that in birds with 0.65% Ca and drip loss of birds given 0.65% or 0.75% Ca was lower than that in birds with 0.85% Ca (p<0.05). The drip loss of birds given 0.25% NPP was lowest among all NPP treatments (p<0.05). Calcium affected (p<0.05) the plasmal contents of phosphorus, osteocalcin (OC), parathyroid hormone (PTH) and calcitonin and the contents of OC and PTH were also influenced by dietary NPP. Conclusion: Dietary Ca and NPP level affected tibial characteristics, meat quality and biochemical variables in plasma of finisher-phase yellow-feathered broilers (85 to 105 d) and Ca also affected growth performance. Dietary 0.71% Ca and 0.30% NPP were enough for growth performance, while considering the growth performance, tibial characteristics, meat quality and biochemical variables together, 0.75% Ca and 0.37% NPP were recommended.

• Journal of the Korean Arthroscopy Society
• /
• v.16 no.1
• /
• pp.9-16
• /
• 2012

Purpose: Tibial plateau fractures cause a variety of problems in the knee joint. The purpose of this study was to investigate the characteristics of the meniscus injuries in tibial plateau fracture arthroscopically. Materials and Methods: Thirty-three out of 39 consecutive patients diagnosed with tibial plateau fractures underwent arthroscopy between March 2007 and March 2010. According to Schatzker classification, there were 1 type I (3.3%), 19 type II (53.3%), 4 type III (13.3%), 2 type IV (6.6%), 2 type V (6.6%) and 5 type VI (20%) fracture patterns in 33 patients. Results: Twenty-five cases (75.8%) had lateral meniscus tears. There were 18 meniscal tears in 19 cases of Schatzker type II fractures (94.7%), 3 meniscal tears out of 4 cases of Schatzker type III fractures (75%) and 4 meniscal tears out of 5 cases of Schatzker type VI fractures (80%). The most commonly affected site (22/25) was the anterior horn of the lateral meniscus. Of the 25 documented meniscal tears, all but one were vertical longitudinal tear at meniscocapsular junction so most cases are amenable to arthroscopic repair. Conclusion: Arthroscopy for the meniscal injuries in tibial plateau fractures is a valuable diagnostic and treatment tool, we recommend arthroscopy in tibial plateau fracture.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.2
• /
• pp.126-132
• /
• 2009

This study examined the differences in spatio-temporal parameters, joint angle, ground reaction force (GRF), and joint power according to the changes of gait speed for trans-tibial amputees to investigate the features of the energy-storing foot for sports. The subjects walked at normal speed and at fast speed, wearing a single-axis type foot (Korec) and an energy-storing foot for sports (Renegade) respectively. The results showed that Renegade yielded faster gait speed as well as more symmetric gait pattern, compared to Korec. However, as gait speed was increased, there was no significant difference in kinematics, ground reaction force, and joint power between two artificial foots. This was similar to the results from previous studies regarding the energy-storing foot, where the walking velocity and gait symmetry have been improved. Nevertheless, the result of this study differed from the previous ones which reported that joint angle, joint power, and GRF increased as the gait speed increased except spatio-temporal parameters.

• Journal of the Korean Arthroscopy Society
• /
• v.2 no.1
• /
• pp.25-32
• /
• 1998

The distinction between isolated and combined injuries is crucial both for treatment and prognosis. For most combined injuries, surgical treatment continues to be favored over nonoperative treatment. It is generally agreed that isolatel PCL injuries do well without surgery. There has been an interest by many authors to fix the graft directly to the posterior aspect of the tibia(tibial inlay). With this procedure, tibial graft fixation will be more direct and theoretically reduce the bending effects of the graft with a fixation site far away from the tibial insertion. Modified tibial inlay technique, which is the posterior approach does not require the patient to be in the prone or lateral decubitus position during the operation. Use of a double-bundle reconstructive technique is attractive and has been performed by some surgeons. At this time, this procedure is still being investigated and should not be routinely used in the clinical setting until studies have indicated an advantage over current single-bundle techniques. However theologically, double-bundle reconstructive technique is more useful in severe posterior unstable knee. Recent advances have increased our knowledge of the anatomy and mechanical characteristics of the PCL. Basic science research has further increased our awareness of the interaction of the posterolateral structures with the PCL. To achieve restoration of normal posterior laxity, it is critical to address the posterior as well as the postero-lateral structures. Surgical treatment is often complex and requires a wide range of surgical techniques and skills to treat associated injuries. When the PCL is reconstructed, most surgeons choose to reconstruct the anterolateral component using a graft of sufficient size and strength. The initial postoperative rehabilitation should be addressed cautiously in an effort to avoid excessive forces on delicate repairs and reconstructions in these complex injuries. Further research is necessary to evaluate new surgical approaches such as double-bundle reconstructions and tibial inlay techniques as well as improved techniques for capsular and collateral ligament injuries.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.2
• /
• pp.261-278
• /
• 1998

The paper represented the lower extremity muscle model as four rigid-body segments: trunk, shank, and foot. We transformed their tibial data into our shank data by rotating their tibial X and Y axes by 5.483 degrees, so the revised coordinate data used to translating the origin of their tibial reference frame to our shank reference frame. According to weight of subject, physiological cross-setional area(PCSA) of each lower extremity muscle was calculated by scaling those data by Brand. The objectives of this paper are to investigate the variations of the recruitment patterns of the lower extremity muscles, and to analyze the changes of the role assigned to each muscle during the seated foot operation. For exertion levels, the transition point of type F motor unit of each muscle is inferred by analyzing the electromyogram at the seated postures. Also, for predetermined seated foot operations exertion levels, the recruitment pattern and the changes of the role assigned are identified in the continuous exertion, by analyzing the electromyogram changes due to the accumulated muscle fatigue. This study can be used to design and to assess the pedals and foot-related equipments design.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.484-488
• /
• 1997

Three-dimensional finite element analyses were used to compare the stress distribution and the stability of the fixation among seven different tibial components and to investigate the effect due to implant materials in total knee arthroplasty. The components included an intact tibia(Type I), Cemented Cobalt-Chromium tibial tray implanted with a PMMA cemented Co-Cr stem(Type II), Cemented Co-Cr tibial tray with a uncemented Co-Cr stem(Type III), Cemented Ultra High Molecular Weight Polyethylene (UHMWPE) tibial tray with a cemented UHMWPE stem (Type IV), Cemented UHMWPE tray with a uncemented UHMWPE stem(Type V), Cemented Co-Cr tray without a stem(Type VI), and Cemented UHMWPE tray without a stem(Type VII). Uncemented components were assumed to have complete bony in growth and a rigid state of fixation between component and bone. The interface between bone/cement/component of cemented components was also assumed to be fully bonded. Bi-condylar forces were applied. The results indicated that Uncemented stem components provided lower bone stress shielding and stress concentration. The UHMWPE tray and stem component showed better agreement with the intact tibia than the Co-Cr Alloy tray and stem components. If the implant tray can be fixed firmed without a stem, Cemented PE tray without a stem(Type VII) may be recommended to give the best characteristics in the sense of stress distribution and stability.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1310-1315
• /
• 2003

Severe osteoarthrosis of the knee joint often requires total knee arthroplasty (TKA) to yield adequate knee function. The knee joint with TKA is expected ideally to restore the characteristics, however, this is not necessarily true in the clinical cases. In this study the motions of the intact joint and the joint after TKA were investigated numerically using computer simulation. For active knee extension from 90 degrees of flexion to full extension, the intact knee joint exhibited anterior tibial translation near the full extension while it showed only rotation for other flexion angles. Physiologic external rotation of the tibia near full extension was also noted in the analytical model. The analysis of the tibial insert of three different shapes (flat, semicurved, and curved types) demonstrated characteristic rotational and sliding motions as well as different contact forces.