• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.189-193
• /
• 1997

(S $r_{0.85}$/C $a_{0.15}$)Ti $O_3$(SCT) thin films at various deposition temperature and rf power were grown by rf magnetron sputtering method on optimized Pt-based electrodes (Pt/TiN/ $SiO_2$/Si). The crystallinity of the films increases with increasing deposition temperature. SCT thin film is depend on the surface morphology and crystallinity of Pt films for bottom electrode. Dielectric constant of (S $r_{0.85}$C $a_{0.15}$)Ti $O_3$ thin films deposited on Si wafer substrate are larger with the increase of deposition temperature and gain size.in size.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 논문집
• /
• pp.170-173
• /
• 2006

Ferroelectric $Bi_{3.35}Sm_{0.65}Ti_3O_{12}(BST)$ thin films were deposited on $Pt(111)/Ti/SiO_2/Si(100)$ substrates by a sol-gel spin-coating process. In this experiments, $Bi(TMHD)_3$, $Sm_5(O^iPr)_{13}$, $Ti(O^iPr)_4$ were used as precursors, which were dissolved in 2-methoxyethanol. Thereafter, the thin films with the thickness, of 240nm were annealed from 600 to $720^{\circ}C$ in oxygen atmosphere for 1 hr, and post-annealed in oxygen atmosphere for 1 hr after deposition of Pt electrode to enhance the electrical properties. The remanent polarization and coercive voltage of the BST thin films annealed at $720^{\circ}C$ were $19.48\;{\mu}C/cm^2$ and 3.40 V, respectively, and a fatigue-free characteristics. As a result, Sm-substituted bismuth titanate films with good ferroelectric properties and excellent fatigue resistance are useful candidates for ferroelectric memory applications.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.853-854
• /
• 2006

Warm compaction powder metallurgy was used to produce a $Ti_3SiC_2$ particulate reinforced Cu matrix composite. Fabrication parameters and warm compaction behaviors of Cu powder were studied. Based on the optimized fabrication parameters a Cu-based electrical contact material was prepared. Results showed that in expend of some electrical conductivity, addition of $Ti_3SiC_2$ particulate increased the hardness, wear resistivity and anti-friction ability of the sintered Cu-base material.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권9호
• /
• pp.510-515
• /
• 2000

The mechanical and electrical properties of the hot-pressed and annealed $\beta-SiC-TiB_2$ electroconductive ceramic composites were investigated as a function of the liquid forming additives of Al_2O_3+Y_2O_34. The result of phase analysis of composites by XRD revealed $\alpha-SIC(6H)\;TiB_2,\; and YAG(Al5Y3O12) crystal phase. The relative density and the mechanical properties of composites were increased with increasing $Al_2O_3+Y_2O_34 contents because YAG of reaction between $Al_2O_3\; and\; Y_2O_3$ was increased. The Flexural strength showed the highest value of 432.5MPa for composites added with 12wt% $Al_2O_3+Y_2O_34 additives at room temperature. Owing to crack deflection crack bridging phase transition and TAG of fracture toughness mechanism the fracture toughness showed 7.1MPa.m1/2 for composites added with 12wt% $Al_2O_3+Y_2O_34 additives at room temperature. The electrical resistivity and the resistance temperature coefficient showed the lowest of $6.0\times10-4\Omega.cm\; and\; 3.1\times10-3/^{\circ}C4 respectively for composite added with 12wt% \Omega additives at room temperature. The electrical resistivity of the composites was all positive temperature coefficient resistance (PTCR) in the temperature range of $25^{\circ}C\; to\; 700^{\circ}C$.

• Journal of Welding and Joining
• /
• 제13권1호
• /
• pp.103-114
• /
• 1995

Plasma Transferred arc(PTA) hard facing process has been developed to obtain an overlay weld metal having excellent wear resistance. The effect of Ti, TiSi$_{2}$ and TiC powders addition on the surface of Aluminum alloy 5083 has been investigated with PTA process. This paper describes the result of test the performance of the overlay weld metal. The result can be summarized as follows 1. Intermetallic compound is formed on surface of base metal in Ti or TiSi$_{2}$ powder but the reaction with surface of base metal is little seen in TiC powder. 2. In formation of composite layer on aluminum alloy surface by plasma transferred arc welding process, high melting ceramics like TiC powder is excellent. 3. The multipass welding process is available for formation of high density of powder. But the more number of pass, the less effect of powder, it is considered, and limits of number of pass. 4. By increasing area fraction of TiC powder on Al alloy surface, in especially TiC powder the hardness increase more than 40% area fraction and 88% shows about Hv 700.

• 한국표면공학회지
• /
• 제29권1호
• /
• pp.3-14
• /
• 1996

High temperature anneal of W-rich silicides, inferior to adherence compared with Si-rich silicides, resulted in the film peeling off from the Si-substrate when WSix thickness reached more than critical thickness. Investigation of the W-rich silicide films peeling off from the substrate revealed that the voids underneath the $WSi_2$ produced through silicide reaction were responsible for the poor adherence of W-rich silicide. In addition, internal stress in the film increased as the silicide thickness increased. In order to promote the adhesion of WSix to Si-substrate, thin Ti-layer was formed between WSi and Si-substrate(WSix/Ti/Si). No voids were observed in $WSi_2$/Ti/Si $N_2$-annealed at $1000^{\circ}C$, thereby leading to an increase of the critical thickness from ～1700$\AA$ to more than 2500$\AA$. However, higher resisiti-vity was obtained in WSix/Ti/Si than in WSix/Si. Finally, different silicide reaction mechanism for the structures(WSix/Si, WSix/Ti/Si) was proposed to explain the formation of voids as well as the role of thin Ti-layer.

• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.908-913
• /
• 2000

CoSi$_2$/p+/n diodes(bilayer diodes) were fabricated by using epitaxial CoSi$_2$grown from Co/Ti bilayer as a diffusion source. The I-V characteristics of p+/n diodes were measured and compared with those of diode made from Co monolayer (monolayer diode). Monolayer diodes showed typical p+n junction characteristics with the leakage current of as low as 10$^{-12}$ A and forward current 6-orders higher than the leakage current, when drive-in annealed at 90$0^{\circ}C$ for 20 sec.. On the other hand, bilayer diodes showed the Schottky-like behaviors with forward currents rather higher than those of monolyer diodes, but with too high leakage currents, when drive-in annealed at $700^{\circ}C$ or higher. However, when the annealing temperature was lowered to $700^{\circ}C$ and annealing time was increased to 60 sec., the leakage current was reduced to 10$^{-11}$ A and thus sho3wed typical diode characteristics. The high leakage currents for diodes annealed at $700^{\circ}C$ or higher was attributed to Shannon contacts formed due to unremoved Co-Ti-Si precipitates. But when annealed at 50$0^{\circ}C$, B ions diffused in the direction of the surface layer, and thus the leakage currents were reduced by removing Shannon contacts.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.183-186
• /
• 2004

The metal-ferroelectric-insulator-semiconductor(MFIS) capacitors were fabricated using a metalorganic decomposition (MOD)method. The $CeO_2$ thin films were deposited as a buffer layer on Si substrate and $Bi_{3.25}La_{0.75}Ti_3O_{12}$ (BLT) thin films were used as a ferroelectric layer. The electrical and structural properties of the MFIS structure were investigated by varying the $CeO_2$ layer thickness. The width of the memory window in the capacitance-voltage (C-V)curves for the MFIS structure decreased with increasing thickness of the $CeO_2$ layer. Auger electron spectroscopy (AES) and transmission electron microscopy (TEM) show no interdiffusion by using the $CeO_2$ film as buffer layer between the BLT film and Si substrate. The experimental results show that the BLT-based MFIS structure is suitable for non-volatile memory field-effect-transistors (FETs) with large memory window.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.211-211
• /
• 1999

Titanium nitride (TiN) thin films have useful properties including high hardness, good electrical conductivity, high melting point, and chemical inertness. The applications have included wear-resistant hard coatings on machine tools and bearings, decorative coating making use of the golden color, thermal control coatings for widows, and erosion resistant coatings for spacecraft plasma probes. For all these applications as feature sizes shrink and aspect ratios grow, the issue of good step coverage becomes increasingly important. It is therefore essential to manufacture conformal coatings of TiN. The growth of TiN thin films by chemical vapor deposition (CVD) is of great interest for achieving conformal deposition. The most widely used precursor for TiN is TiCl4 and NH3. However, chlorine impurity in the as-grown films and relatively high deposition temperature (>$600^{\circ}C$) are considered major drawbacks from actual device fabrication. To overcome these problems, recently, MOCVD processes including plasma assisted have been suggested. In this study, therefore, we have doposited Ti(C, N) thin films on Si(100) and D2 steel substrates in the temperature range of 150-30$0^{\circ}C$ using tetrakis diethylamido titanium (TDEAT) and titanium isopropoxide (TIP) by pulsed DC plamsa enhanced metal-organic chemical vapor deposition (PEMOCVD) method. Polycrystalline Ti(C, N) thin films were successfully grown on either D2 steel or Si(100) surfaces at temperature as low as 15$0^{\circ}C$. Compositions of the as-grown films were determined with XPS and RBS. From XPS analysis, thin films of Ti(C, N) with low oxygen concentration were obtained. RBS data were also confirmed the changes of stoichiometry and microhardness of our films. Radical formation and ionization behaviors in plasma are analyzed by optical emission spectroscopy (OES) at various pulsed bias and gases conditions. H2 and He+H2 gases are used as carrier gases to compare plasma parameter and the effect of N2 and NH3 gases as reactive gas is also evaluated in reduction of C content of the films. In this study, we fond that He and H2 mixture gas is very effective in enhancing ionization of radicals, especially N resulting is high hardness. The higher hardness of film is obtained to be ca. 1700 HK 0.01 but it depends on gas species and bias voltage. The proper process is evident for H and N2 gas atmosphere and bias voltage of 600V. However, NH3 gas highly reduces formation of CN radical, thereby decreasing C content of Ti(C, N) thin films in a great deal. Compared to PVD TiN films, the Ti(C, N) film grown by PEMOCVD has very good conformability; the step coverage exceeds 85% with an aspect ratio of more than 3.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권11호
• /
• pp.603-608
• /
• 2000

$(Ba, Sr)TiO_{3}$[BST] thin films were fabricated on the Pt/TiO$_2$/SiO$_2$/Si substrate by the RF sputtering. The structure and dielectric properties of the BST thin films with the substrate temperature were investigated. Increasing the substrate temperature, The BST phase increased and barium multi titanate phases decreased. Increasing the frequency, the dielectric constant decreased and the dielectric loss increased. The dielectric constant and dielectric loss of the BST thin films deposited at 50$0^{\circ}C$ were 300 and 0.018, respectively at 1 kHz. The leakage current density of the BST thin films deposited at 50$0^{\circ}C$ was $10^{-9}$ A/$\textrm{cm}^2$ with applied voltage of 3V. Because of the high dielectric constant(300), low dielectric loss(0.018) and low leakage current($10^{-9}$ A/$\textrm{cm}^2$), BST thin films deposited at 50$0^{\circ}C$ is expecting for the application of DRAM.