• 대한치과보철학회지
• /
• 제49권1호
• /
• pp.16-21
• /
• 2011

연구 목적: 높은 외력이 작용하는 부위의 임플란트 재료로서 사용되고 있는 Ti-6Al-7Nb 합금의 골유착을 개선하기 위한 방법의 하나로서 나노튜브 $TiO_2$ 층 생성하고 전석회화 처리한 다음 유사체액 중에서의 활성도를 알아보고자 하였다. 연구 재료 및 방법: 양극산화처리는 glycerol에 20 wt% $H_2O$와 1 wt% $NH_4F$를 혼합하여 준비한 전해질 수용액에 전압 20 V, 전류밀도 20 mA/$cm^2$의 조건에서 1시간동안 통전하였다. 전석회화처리는 $80^{\circ}C$의 $Na_2HPO_4$ 수용액에 30분 동안 침적하고, 이어서$100^{\circ}C$의 $Ca(OH)_2$ 포화 수용액에 30분 동안 침적하였으며, $500^{\circ}C$에서 2시간 동안 열처리하였다. 전석회화처리 후 표면층의 생체활성도를 조사하기 위해 $36.5^{\circ}C$, pH 7.4의 유사체액에 10일 동안 침적하였다. 결과: 1. 나노튜브 $TiO_2$ 층은 높은 자기정렬 형태를 갖고 큰 직경의 튜브들 사이 공간에 상대적으로 작은 직경의 튜브들이 생성되는 형태로 치밀한 구조를 이루었으며, 상부에서 하부로 갈수록 직경 감소를 보였다. 2.1 wt% $NH_4F$와 20 wt% $H_2O$를 함유하는 glycerol 전해액에서 20V의 전압을 인가하여 생성된 나노튜브들의 평균 길이는 $517.0{\pm}23.2\;nm$를 보였다. 3. 나노튜브 $TiO_2$ 층의 생체활성도는 $80^{\circ}C$의 0.5 M$Na_2HPO_4$ 수용액과 $100^{\circ}C$의 $Ca(OH)_2$ 포화 수용액에 침적하는 전석회화처리 군의 경우에 크게 개선되어, 아파타이트의 석출 과정에서 나타나는 치밀한 돌기상과 이들을 가로지르는 미세 균열상이 관찰되었다. 결론: Ti-6Al-7Nb 합금을 나노튜브 $TiO_2$ 층 생성 후 전석회화 처리한 결과 생체활성도가 개선되었다.

• 한국진공학회지
• /
• 제12권4호
• /
• pp.218-227
• /
• 2003

AlGaAs/GaAs HBT 에미터 오믹 접촉을 위해 n형 InGaAs에 대한 Pd/Si/Ti/Pt 및 Pd/Si/Pd/Ti/Au 오믹 접촉 특성을 조사하였다. Pd/Si/Ti/Pt 오믹 접촉의 경우, 증착 상태에서는 접촉 비저항을 측정할 수 없을 정도의 비오믹 특성을 보였으며, $375^{\circ}C$에서 10초 동안 열처리한 경우 $5\times10^{-3}\Omega\textrm{cm}^2$의 높은 접촉 비저항을 나타내었다. 그러나 열처리 조건을 $425^{\circ}C$, 10초로 변화시킬 경우 $2\times10^{-6}\Omega\textrm{cm}^2$의 낮은 접촉 비저항을 나타내었다. Pd/Si/Pd/Ti/Au 오믹 접촉의 경우, $450^{\circ}C$까지의 열처리 동안에 전반적으로 우수한 오믹 특성을 나타내어 $400^{\circ}C$, 20초의 급속 열처리 조건에서 최저 $3.9\times10^{-7}\Omega\textrm{cm}^2$의 접촉 비저항을 나타내었다. 두 오믹 접촉 모두 오믹 재료와 InGaAs의 평활한 계면을 유지하면서 우수한 오믹 특성을 나타내어, 화합물 반도체 소자의 오믹 접촉으로 충분히 응용 가능하였다. Pd/Si/Ti/Pt 및 Pd/Si/Pd/Ti/Au를 AlGaAs/GaAs HBT의 에미터 오믹 접촉으로 사용하여 제작된 HBT 소자의 고주파 특성을 측정한 결과, 차단 주파수가 각각 63.9 ㎓ 및 74.4 ㎓로, 또한 최대공진 주파수가 각각 50.1 ㎓ 및 52.5 ㎓로 우수한 작동특성을 보였다.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.498-502
• /
• 2010

Aluminium titanate($Al_2TiO_5$) has extremely anisotropic thermal expansion properties in single crystals, and polycrystalline material spontaneously microcracks in the cooling step after sintering process. These fine intergranular cracks limit the strength of the material, but provide an effective mechanism for absorbing strain energy during thermal shock and preventing catastrophic crack propagation. Furthermore, since machinable BN-ceramics used as an insulating substrate in current micro-electronic industry are very expensive, the development of new low-cost machinable substrate ceramics are consistently required. Therefore, cheap $Al_2TiO_5$-machinable ceramics was studied for the replacement of BN ceramics. $Al_2O_3-Al_2TiO_5$ ceramic composite was fabricated via in-situ reaction sintering. $Al_2O_3$ and $TiO_2$ powders were mixed with various mol-ratio and sintered at 1400 to $1600^{\circ}C$ for 1 h. Density, hardness and strength of sintered ceramics were systematically measured. Phase analysis and microstructures were observed by XRD and SEM, respectively. Machinability of each specimens was tested by micro-hole machining. The results of research showed that the $Al_2TiO_5$-composites could be used for low-cost machinable ceramics.

• 한국세라믹학회지
• /
• 제31권12호
• /
• pp.1545-1551
• /
• 1994

Various kinetic parameters of the nucleation and crystallization in anorthite glass (CaO.Al2O3.2SiO2) were calculated by nonisothermal differential thermal analysis. Base glass and glass with TiO2 were prepared by melting. In base glass, the temperature where nucleation can occur ranges from 85$0^{\circ}C$ to 9$25^{\circ}C$ and the temperature for maximum nucleation was 900$\pm$5$^{\circ}C$. In glass with TiO2, the nucleation temperature range was 800~875$^{\circ}C$ and the maximum nucleation temperature was 850$\pm$5$^{\circ}C$. Kissinger equation, Bansal equation, and modified Ozawa equation were used for calculating activation energy for crystallization, Ec. The results showed the same activation energies for both glasses with and without TiO2 in the different equations. The shape of maximum exotherm peak and Ozawa equation were used for Avrami exponent, n. The n value for each glass was 2, indicating that each glass crystallized primarily by bulk crystallization.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2288-2292
• /
• 2007

The catalytic activities of nickel-based catalysts were estimated for oxidizing acetaldehyde of VOCs exhausted from industrial facilities. The catalysts were prepared by sol-gel methods of SiO2 and SiO2-TiO2 as a xerogel followed by impregnating Al2O3 powder with the nickel nitrate precursor. The crystalline structure and catalytic properties for the catalysts were investigated by use of BET surface area, X-ray diffraction (XRD), Xray photoelectron spectroscopy (XPS) and temperature programmed reduction (TPR) techniques. These results show that nickel oxide is transformed to NiAl2O4 spinel structure at the calcination temperature of 400 °C in response to the steps with after- and co-impregnation of Al2O3 powder in sol-gel process. The NiAl2O4 could suppress the oxidation reaction of acetaldehyde by catalysts. The NiO is better dispersed on SiO2-TiO2/Al2O3 support than SiO2/Al2O3 and SiO2-TiO2-Al2O3 supports. From the testing results of catalytic activities for oxidation of acetaldehyde, Catalysts showed a big difference in conversion efficiencies with the way of the preparation of catalysts and the loading weight of nickel. The catalyst of 8 wt.% Ni/TiO2-SiO2/Al2O3 showed the best conversion efficiency on acetaldehyde oxidation with 100% conversion efficiency at 350 °C.

• 열처리공학회지
• /
• 제8권1호
• /
• pp.84-88
• /
• 1995

Various heat-treatments were conducted to Ti-48.1at%Al and Ti-48.3at%Al-1.2at%Mn alloys casted by plasma arc melting system. Mechanical properties, microstructure and high temperature oxidizing behaviors of as-casted and heat-treatment alloys were investigated. Ti-48.1Al and Ti-48.3Al-1.2Mn alloys were decreased in strength according to increased of heattreatment temperature. Oxidizing weight gain of Ti-48.1Al alloy which conducted at $1273^{\circ}K$ was linearly increased. In case of adding Mn to alloy, there was no rapid increase of oxidizing weight gain during early time.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.455-462
• /
• 2002

The microstructures and properties of TiC dispersed nickel-base alloy were studied in this work. The alloy prepared by powder metallurgical processing was solution treated, 1st-aged at $880^{\circ}C$ for 16 hours, and then 2nd-aged at $760^{\circ}C$ for 4 hours. Microstucture of sintered specimen showed that TiC particles are uniformly dispersed in Ni base alloy. In the specimen aged at $880^{\circ}C$ for 8 hours, the fine $\gammaNi_3$(Al,Ti) precipitates with round shape are observed and the very fine $\gammaNi_3$(Al,Ti) particles with round shape are precipitated in the specimen aged at $760^{\circ}C$ for 4 hours. The presence of ${\gamma}$precipitates in TiC/Ni base alloy increased the hardness and wear resistance of the specimen. The hardness and wear resistance of the Ni-base with TiC are higher than those of conventional Ni-base superalloy X-750 because of dispersion strengthening of TiC particles. The hardness, transverse rupture strength and resistance of the specimen 2nd-aged at $760^{\circ}C$ for 4 hours are higher than those of 1st-aged specimen due to ultrafine $\gammaNi_3$(Al,Ti) precipitates.

• 한국재료학회지
• /
• 제21권8호
• /
• pp.450-455
• /
• 2011

[ $Al_2TiO_5$ ]has a high refractive index and good solubility of the chromophore in the $Al_2TiO_5$ lattice, which allows this structure to be a good candidate for the development of new ceramic pigments. However, pure $Al_2TiO_5$ is well known to decompose on firing at $900{\sim}1100^{\circ}C$. However, this process can be inhibited by the incorporation of certain metal cations into its crystalline lattice. In this study, the synthesis of gray ceramic pigment was performed by doping cobalt on the $Al_2TiO_5$ crystal structure. The $Al_2TiO_5$ was synthesized using $Al_2O_3$ and $TiO_2$, and doped with $Co_3O_4$ as a chromophore material. In order to prevent the thermal decomposition during the cooling procedure, MgO was added to samples by 0.05 mole, 0.1 mole, and 0.15 mole as a stabilizer. The samples were fired at $1500^{\circ}C$ for 2 hours and cooled naturally. The crystal structure, solubility limit, and color of the synthesized pigment were analyzed using XRD, Raman spectroscopy, UV, and UV-vis. $Al_2O_3$ was available for the formation of $CoAl_2O_4$, which should also be considered in order to explain the small amount of this phase detected in the sample with the higher $Co^{2+}$ content (${\geq}$ 0.03 mole). It was found that the solubility limit of $Co^{2+}$ in the $Al_2TiO_5$ crystal was 0.02 mole% through an analysis of Raman spectroscopy. Through the addition of a pigment with 0.02 mole% of $Co^{2+}$ to lime-barium glaze, stabilized gray color pigments with 66.54, -2.35, and 4.68 as CIE-$L^*a^*b^*$ were synthesized.

• 한국재료학회지
• /
• 제2권6호
• /
• pp.408-416
• /
• 1992

Single-Si 기판과 poly-Si 기판에 각각 Ti을 sputter한 후 RTA 처리하여 안정한 TiS$i_2$를 형성하였다. 그 위에 Si이 1% 첨가된 Al-1% Si을 600nm sputter한 후 후속 열처리로서 400-60$0^{\circ}C$ 에서 30분간 $N_2$분위기로 furnace어닐링을 실시하였다. 이렇게 준비된 각 시편에 대하여 면저항 측정, Auger분석, SEM 사진으로 Al-1% Si/TiS$i_2$이중층 구조에서 Ti-silicide의 열적 안정성을 살펴 보았고, EDS 분석과 X-ray 회절 peak 분석을 통하여 Al-1% Si 층과 TiS$i_2$층의 반응으로 생긴 석출물의 성분과 상을 조사하였다. 이로 부터 다음과 같은 결과를 얻었다 Single-Si 기관에서 형성한 TiS$i_2$층은 Al-1% Si 층과 55$0^{\circ}C$에서 완전히 반응하여 석출물을 형성하였고, poly-Si 기판에서 형성한 TiS$i_2$층은 Al-1% Si 층과 50$0^{\circ}C$에서 완전히 반응하여 석출물을 형성하였는데 전반적으로 기판이 poly-Si인 경우가 반응이 더 잘 일어났고, 석출물의 크기도 비교적 컸다. 이는 poly-Si에 존재하는 grain boundary로 인해 poly-Si에서 형성된 Ti-silicide 층이single-Si 기관에서 형성된 Ti-silicide 층보다 불안정하기 때문으로 생각된다. EDS 분석에 의하여 석출물은 Ti, Al, 그리고 Si로 이루어진 3상 화합물이라고 추정되었고, X-ray회절 분석에 의해 석출물은 Ti, Al, 그리고 Si간의 3상 화합물인 T$i_7$A$l_5$S$i_12$로 확인되었다.

• 한국주조공학회지
• /
• 제9권4호
• /
• pp.320-326
• /
• 1989

Titanium-Boron-Aluminium master alloys are used extensively to grain-refine a wide range of aluminium alloys. This experiment was performed by various amounts of AlTi5B1 addition to the technical aluminium alloys, and also by changing cast temperature and hold time of the melts. The macrostructures were shown that with increasing the addition of AlTi5B1 to the melts, the grain became finer. In the case of cast temperature high enough over $900^{\circ}C$, the grain became coarser, but hold time change not affected on the grain refinement. Particles of $TiAl_3$, and $TiB_2$ were found in the grains and grainboundaries. The important role of grain refinement in this experiment were mainly $TiAl_3$, and also $TiB_2$ those have been confirmed in TEM, SEM, EDS, WDX and X-ray diffraction.