• 센서학회지
• /
• 제11권2호
• /
• pp.77-83
• /
• 2002

저비용과 휴대성을 고려한 알코올 경보기의 제작을 위해 동작온도가 낮고 감도가 높은 반도체 가스 센서를 제작하였다. $Fe_2O_3$에 금속 산화물인 $MoO_3$, $V_2O_5$, $TiO_2$, 그리고 CdO 등을 첨가하여 스크린 프린팅법을 이용하여 센서를 제작하였다. 센서의 전기적 안정성을 위하여 질소 분위기에서 $700^{\circ}C$, 2시간 동안 열처리를 하였다. 알코올, 탄화수소계 가스와 담배연기 등을 사용하여 센서의 가스 감도를 조사하였다. $V_2O_5$를 첨가한 센서가 알코올 가스 1,000 ppm에 대해서 약 $80{\sim}90%$의 감도를 보이며, 타 가스에 대한 선택성도 가짐을 알 수 있었다. 제작된 센서와 PIC-chip을 사용하여 휴대 가능한 경보기를 제작할 수 있었다.

• Journal of the Korean Physical Society
• /
• 제73권11호
• /
• pp.1712-1715
• /
• 2018

To study the applications for ferroelectric non-volatile memory and ferroelectric memristor, etc., deposition pressure dependent electric the properties of $(Hf,\;Zr)O_2$ thin films by RF sputtering deposition method were investigated. The bottom electrode was TiN thin film to produce stress effect on the formation of orthorhombic phase and top electrode was Pt thin film by DC sputtering deposition. Deposition pressure was varied along with the same other deposition conditions, for example, sputtering power, target to substrate distance, post-annealing temperature, annealing gas, annealing time, etc. The structural and electric properties of the above thin films were investigated. As a result, it is confirmed that the electric properties of the $(Hf,\;Zr)O_2$ thin films depend on the deposition pressure which affects structural properties of the thin films, such as, structural phase, ratio of the constituents, etc.

• 한국물환경학회지
• /
• 제18권4호
• /
• pp.387-394
• /
• 2002

본 연구는 $TiO_2$ 광촉매 및 응집-여과-중화공정을 거친 아크릴폐수를 UF(tubular)/RO(spiral wound)공정에 적용하여 적용압력과 온도변화에 따른 성능변화를 고찰하였다. 한외여과 관형모듈에서 광촉매 전처리수와 응집-여과-중화 전처리수의 COD, T-N은 온도 및 압력변화에 크게 영향을 받지 않고, 제거효율도 낮은 것으로 확인할 수 있었다. TDS 및 turbidity의 경우 한외여과 관형 모듈에서 광촉매 전처리수가 응집-여과-중화공정의 처리수에 비해 처리효율이 우수함을 확인하였다. T-N, TDS는 역삼투막 공정에서 우수한 제거효율을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.44-44
• /
• 2009

Recently, transparent ZnO-based TFTs have attracted much attention for flexible displays because they can be fabricated on plastic substrates at low temperature. We report the fabrication and characteristics of ZnO channel layers(ZnO TFTs) having different channel thicknesses. The ZnO film were deposited as active channel layers on $Si_3N_4/Ti/SiO_2p$-Si substrates by rf magnetron sputtering at $100\;^{\circ}C$ without additional annealing. Also the Zno thin films deposited at oxygen partial pressures of 40%. ZnO TFTs using a bottom-gate configuration were investigated. The $Si_3N_4$ film were deposited as gate insulator by PE-CVD at $15\;^{\circ}C$. All Processes were processed below $150^{\circ}C$ which is optimal temperature for flexible display and were used dry etching method.

• Journal of Korean Society for Atmospheric Environment
• /
• 제17권E1호
• /
• pp.1-7
• /
• 2001

The elemental characteristics of atmospheric aerosols were investigated as a function of particle size and water solubility. The aerosol particles were samples at 12 individual size ranges between 0.01 and 30㎛. Collected aerosol particles were separated into both soluble and insoluble components. The concentrations of 15 elements in both components were determined by a PIXE analysis using a 2.0 MeV-proton beam. In general, the mass size distribution of particulate matter was represented as a bimodal distribution. The maximum rations of S in July and December were 5.5 and 3.8 %, and they appeared in the size range of 0.47∼1.17㎛(stage No. 6 or 7) . The ratios of a S at non-separated size were 3.1 and 2.2 % in July and December, respectively, On the other hand, the maximum rations of Si in July and December were 7.0 and 5.4% and they appeared in the size range of 5.1∼30㎛(stage No. 0∼2). The ratios of Si at the non-separated size were 2.1 and 1.8% in July and December, respectively, The mass diameter of 12 elements ranged between 0.59㎛ of S and 3.20 of Fe. More than 90% of atmospheric aerosols consisted of the light elements such as C, N, O, H and Al. The soluble component was dominant in the smaller size range and the insoluble component in the larger size range. Large portions of Si. Ti and Fe existed in insoluble state. By contrast, S, Cl, Ca, Zn and Br were dissolved in water.

• 한국진공학회지
• /
• 제7권s1호
• /
• pp.50-56
• /
• 1998

Ion beam assisted deposition (IBAD) was successfully used to produce a dense and ultra-adherent Hydroxyapatite (HA) film on titanium alloy and alumina. Recently it is also proved that the HA coatings on alumina substrate treated with 20 ppm $AgNO_3$ had the structure of $(Ag, Ca)_10(PO_4)6(OH)_2$, which exhibited excellent antimicrobial effects. The present paper aims to morphlogically characterize the adhesion of macrophages on newly developed Ag-HA coated alumina and Ti6A14V substrates and to evaluate the biocompatibility of the coatings in vitro. It can be found that the cell number on alumina of the concentration of $AgNO_3$ in the treatment, the cell number on Ag-HA coatings decreased. Up to 20 ppm $AgNO_3$ by Ag-treatment, the morphological development of the cells on Ag-HA coating was similar to that of the cells on HA coating, suggesting the biotolerance of the Ag-HA coatings.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.737-739
• /
• 1992

The microstructure and humidity sensitive characteristics of $V_2O_5$ doped $CaTiO_3$ were studied. Sensing elements were prepared in bulk form. This element exhibits a porous structure. The grain grows and electrical conductivity increases as doping amount of $V_2O_5$ increases. The change of impedance and capacitance under different r.h is remarkable, and the conduction carriers of this element were ions.

• 한국진공학회지
• /
• 제4권S1호
• /
• pp.118-128
• /
• 1995

Copper(l) hexafluoroacetonate trimethylvinylsilane [Cu(hafac)(TMVS)]를 precursor로 사용하여 증착온도 $160~330^{\circ}C$ 범위에서 TiN 모재 위에 낮은 전기비저항값(~2 $\mu$$\Omega$.cm)을 갖는 CVD Cu 박막을 제조하였고, 증착온도에 따른 Cu 박막의 특성을 조사하여 증착온도가 Cu 박막의 미세구조와 전기비저항에 미치는 영향을 고찰하였다. Cu 증착의 활성화에너지는 표면반응제한지역(surface-reaction-limited region)에서 10.8 kcal/mol 이었다. 표면반응에 의해 증착속도가 결정되는 증착온도 $200^{\circ}C$ 이하에서 증착된 Cu 박막은 낮은 비저항값을 갖는 치밀한 박막이었고 step coverage 또한 우수하였다. 이에 반해 물질전달이 증착속도를 결정하는 증착온도 $200^{\circ}C$이상에서 증착된 Cu 박막은 연결상태가 불량한 구형의 결정립들로 이루어져 있어서 높은 비저항값과 거친 표면형상을 나타내었다. 이와 함께 증착온도에 따른 Cu 박막의 결정립 크기, 배향성 등도 조사하였다.

• 한국자동차공학회논문집
• /
• 제2권2호
• /
• pp.95-102
• /
• 1994

Aluminum sheet application to automobile body panels has now become an important objective to meet the requirements of automobile weight reduction. As the Mg content in Al-Mg based alloys increased up to 7.19%, the strength and elongation increased. For instance. Al-7.19Mg alloy had a high strength of 305MPa and a high elongation of 35%. A study was also made to investigate the interrelation between grain size and tensile properties with varying the contents of Mg, Ti and Zr elements and annealing conditions. The yield stress decreased as the grain size increased, which increased the uniform elongation. The strain hardening exponents n increased as the Mg content increased, which depended on the increasing difficulties of the cross slip of dislocation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.319-320
• /
• 2008

본 연구에서는 대기압하에서 고품질의 산화막 증착을 목적으로 TEOS(Tetraethyl Orthosilicate)를 이용하여 APCVD법(Atmospheric Pressure CVD)으로 실리콘 산화막을 증착하고 하였으며, 특성 비교를 위하여 ICP-CVD를 이용하여 $SiH_4$ 와 $N_2O$ source gas를 이용하여 산화막을 증착하였다. 트랜지스터 제작후 Semiconductor measurement system을 이용하여 TFT의 전기적 특성을 측정 하였으며, 결과적으로 유기 사일렌을 사용한 경우 보다 우수한 전기적 특성을 확인할 수 있었다.