• 자원환경지질
• /
• 제26권4호
• /
• pp.499-505
• /
• 1993

The Imgye hornblendites occur as intrusive sills or dykes within the mylonite zone developed along the contact boundary between Precambrian Jungbongsan granite and Cambrian Jangsan quartzite or Myobong slate formations. The hornlendites belong to the subalkaline and tholeiitic series. In tectonomagmatic discrimination diagrams such as $TiO_2-K_2O-P_2O_5$, 2Nb-Zr/4-Y and $TiO_2-10MnO-10P_2O_5$, the hornblendites are classified into continental- and island-arc tholeiites. The hornblendites show fractionated REE patterns with $(La/Yb)_{CN}$ ranging from 3.73-4.56. In incompatible element abundance variations, the hornblendites show distinctive positive and negative anomalies for Rb and Nb, respectively, and unfractionated patterns of immobile incompatible elements such as Y and Yb. The REE patterns of the hornblendites are also similar to those of typical continental back-arc tholeiites and those of the Precambrian Okbang amphibolites in the Socheon-meon, Bonghwa-gun. Accoiding to geochemical characteristics above-mentioned, the hornblendites seem to have been formed from tholeiitic magmas of depleted upper mantle source, contaminated by crustal material en route to continental back-arc basin.

• Structural Engineering and Mechanics
• /
• 제76권5호
• /
• pp.561-578
• /
• 2020

The present work addresses the surface integrity and chip morphology in finish hard turning of AISI D3 steel under nanofluid assisted minimum quantity lubrication (NFMQL) condition. The surface integrity aspects include microhardness, residual stress, white layer formation, machined surface morphology, and surface roughness. This experimental investigation aims to explore the feasibility of low-cost multilayer (TiCN/Al2O3/TiN) coated carbide tool in hard machining applications and to assess the propitious role of minimum quantity lubrication using graphene nanoparticles enriched eco-friendly radiator coolant based nano-cutting fluid for machinability improvement of hardened steel. Combined approach of central composite design (CCD) - analysis of variance (ANOVA), desirability function analysis, and response surface methodology (RSM) have been subsequently employed for experimental investigation, predictive modelling and optimization of surface roughness. With a motivational philosophy of "Go Green-Think Green-Act Green", the work also deals with economic analysis, and sustainability assessment under environmental-friendly NFMQL condition. Results showed that machining with nanofluid-MQL provided an effective cooling-lubrication strategy, safer and cleaner production, environmental friendliness and assisted to improve sustainability.

• 한국지구과학회지
• /
• 제38권1호
• /
• pp.49-63
• /
• 2017

영남육괴 북동부에 위치하는 춘양화강암은 비알칼리계열 중 칼크-알칼리계열에 해당하는 I-type의 화강암류이며, 고알루미나질이다. 주성분원소 및 미량원소의 함량변화는 체계적인 연속성을 보이며, 일반적인 남한의 쥐라기 화강암류의 분화경향과 유사하다. 미량원소 중 유동성을 가지는 LILE (Sr, K, Rb, Ba)는 부화되어 있는 반면, 비유동성을 나타내는 HFSE 중 Ta, Nb, P, Ti의 함량은 상대적으로 결핍되어 있다. HREE에 대한 LREE의 강한 부화($(La/Lu)_{CN}=41.8-73.2$)와 Eu 부(-)이상[$(Eu/Eu^*)_{CN}=0.89-1.10$]은 남한에 분포하는 쥐라기 화강암류의 패턴과 매우 유사하다. 이러한 춘양화강암을 암체의 서쪽에 위치하며 영주저반의 대부분을 차지하는 부석심성암체와 비교하면 주성분원소 및 미량원소의 Harker 성분변화도에서 $SiO_2$ 함량에 따른 상관관계를 인지할 수 없어 두 암체는 성인적으로 무관한 별개의 암체로 사료된다. 춘양화강암은 지구조 판별도에서 화산호 환경에 도시되고 따라서 춘양화강암의 지화학적 특성을 종합해보면 쥐라기 고태평양판이 섭입하는 활동성 대륙주변부 환경에서 생성되었을 것으로 사료된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.266-266
• /
• 2010

마그네트론 스퍼터링을 이용하여 질소와 탄소를 함유한 티타늄 화합물을 합성하고, 조성 변화에 따른 색상 변화를 통해 티타늄 화합물로 구현할 수 있는 색상에 대해서 알아보았다. 스퍼터 타겟은 4"X1/4" 크기의 고순도(99.99%) 티타늄을 사용하였다. 시편은 알코올과 아세톤에서 각각 5분간 초음파 세척된 SUS304를 사용하여, 진공용기에 시편을 장착하고 압력을 $3{\times}10^{-6}\;Torr$까지 배기한 후, Ar 가스를 주입하여 진공도가 $2{\times}10^{-2}\;Torr$에 이르면 펄스 전원 공급 장치를 이용하여 800 V의 전압으로 1시간 동안 글로우 방전을 시켜 시편 청정을 실시하였다. 시편 청정이 끝나면 다시 $3{\times}10^{-6}\;Torr$까지 진공배기를 실시하고, Ar 가스를 진공용기 내로 공급하여 $1{\sim}3{\times}10^{-3}\;Torr$에서 스퍼터링을 실시하여 완충층으로 티타늄 박막을 코팅하였다. 티타늄 화합물은 티타늄을 스퍼터링 하면서 진공용기 내에 질소와 메탄가스를 적절한 비율로 공급함으로써 코팅하였다. 박막 증착 시 시편 온도는 $200^{\circ}C$, 타겟과의 거리는 12 cm를 유지하였으며, 시편을 회전시켜 코팅하였다. 티타늄 화합물의 두께와 미세구조, 조성 그리고 색상은 투과전자현미경(transmission electron microscope, TEM), 글로우 방전 분광기(glow discharge light spectroscope, GDLS), 및 색차계(spectrophotometer)를 사용하여 각각 분석하였다. TEM 분석결과 TiN의 박막 두께는 약 300 nm로 공극이 존재하지 않는 치밀한 다결정 구조를 나타내었고, TiCN은 약 600 nm로 TiN과 두 배의 두께 차이를 보였다. 이는 탄소의 공급원인 메탄가스의 주입으로 증착률이 증가한 것으로 판단된다. 또한 소량의 질소와 메탄가스의 유량 조절로 화합물의 조성을 변화시킬 수 있었으며, 이러한 조성 변화는 화합물의 색상변화로 나타났다. 따라서 본 연구에서 얻어진 결과를 외관 코팅 분야에 응용한다면 다양한 색상 구현과 외관의 경도, 내마모성, 내식성의 향상 등 많은 장점을 가질 것으로 판단된다.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.1-6
• /
• 2010

Inconel 718 alloy has been applied to high temperature, high load and corrosion resistant environments due to its superior properties. However, This alloy is a difficult-to-cut nickel-based superalloy and the chipping or notch wear is mainly generated on the cutting edge of the tool. In this study, the machinability of Inconel 718 is investigated to improve tool life under various cutting conditions with TiCN-based coated ball-end mills. The cutting conditions can be suggested to improve both the tool life and machined surface quality in Inconel 718 high speed machining.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.82-86
• /
• 1999

An experimental study has been carried out to reduce bending load, surface roughness and springback in bending process of stainless steel sheets. A U-bending test has been performed to investigate appropriate process parameters for getting better surfaces and accurate dimensions of stainless steel products. In the test, selected process parameters are die material, lubricant, and die clearance. Die materials used in the test are STD11(HRC60), STD11(TiCN), and AMPCO. From the test results, we can suggest that AMPCO dies are most suitable for reducing bending load and surface roughness of stainless steel sheets. And STD11 dies are favorable for avoiding spring-back in the stainless steel sheet-bending.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.347-352
• /
• 1996

Studies on tile microstructural and compositional changes in sensitized Ni base Alloy 600 by laser surface melting have been carried out using TEM equipped with EDXA. The microstructure of the laser melted zone was mainly consisted of fine cells, and along the cell and grain boundaries, Cr enrichment due to its segregation was observed. Cr carbides having formed along the grain bundaries during the sensitization treatment have been completely dissloved. The cell walls were decorated with dislocations and the very tiny precipitates, found to be Ti(CN) type, were distributed randomly along the cell walls with tangled dislocations around them.

• 소성∙가공
• /
• 제9권5호
• /
• pp.463-468
• /
• 2000

An experimental study has been performed to investigate the forming characteristics of pre-coated metals(PCMs) widely used in domestic appliances through Erichsen tests and deep drawing tests. Erichsen tests are performed to find out the forming limits of seven pre-coated metals in normal conditions. Rectangular deep-drawing tests are carried out to know the effects of die materials and blank metals on forming loads and surface defects of final PCM products. In the deep-drawing test, four die materials ［STD11(TiCN), STD11, STD11(TD), AMPCO] are used. In the Erichsen test, the forming limits of PCMs are obtained from flaking or crack of pre-coated films and lower than those of base metals. In respect of surface roughness and forming load, STD11(TD) and AMPCO materials are superior to my other die-materials used in the deep-drawing test.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.159-162
• /
• 1999

This study has been performed to investigate forming limit of PCM(Pre-Coated Metal) widely using appliances. Die set was made for deep drawing test and some PCMs were inrectangular deep drawing test in no-lubricant 20% clearance some die materials(STD11(TiCN) STD11(HrC60) STD11(TD) AMOCO and 6mm/sec punch speed. and Ericshen test was performed in regular conditions In this experiment forming limit forming characteistics superior die materials and fracture of PCMs been investigated. In results tested PCMs have lower forming limit than base material because lower elongation ultimate strength than base material And two-fracture types - occurring band and flaking - of PCMs have been investiqated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.118-121
• /
• 2005

The square cup drawing of magnesium alloy AZ31 $(aluminum\;3\%,\;Zinc\;1\%)$ sheets was studied by experimental approach in various temperatures (200, 250, 300, 350, $400^{\circ}C$) when blank holding force (BHF) was controlled in real-time. And so on, the drawability was measured with the different die and punch coating. The square cup drawing test was performed by three different coated punches (CrN, TiCN, Non-coated). BHF was set about 2.0 KN, forming speed was 50 mm/min, blank thickness were 0.5, 1.0mm and the cup size was 40 mm by 60 mm after forming. The experimental data of square cup drawing test show that the tools coating and temperature were effect on the drawbility.