• Tunnel and Underground Space
• /
• v.12 no.3
• /
• pp.142-151
• /
• 2002

Claesson(2001)'s analytical solution, and two numerical models with Dirichlet and Neuman interior boundary condition respectively were investigated to estimate the transient temperature distribution with distances from the Taejon underground food cold storage pilot cavern. Claesson's solution, which is based on constant temperature boundary condition at the rock wall during a temperature decline step, showed relatively good agreement with temperature measurements in the rock mass in order of average error difference, 0.89$\^{C}$ without any adjustments on laboratory thermal properties to represent the rock mass. For the numerical model with heat flux through the rock wall, a boundary condition setting technique was newly proposed to overcome the difficulty of prescribing variable convective heat tranfer coefficient and far-field air temperature inside the cavern as they may be certainly changed according to the cooling-down time. The results showed also good agreement with measurements in order of average error difference, 1.58$\^{C}$, and were compared to those of the numerical model with fixed temperature at the rock wall. Finally, the most proper procedure to precisely predict the temperature profile around a cavern was proposed as a series of analysis steps including an analytical exact solution and numerical models.

• Journal of Life Science
• /
• v.20 no.8
• /
• pp.1201-1206
• /
• 2010

We performed a comparative analysis using a Real-time PCR (Polymerase Chain Reaction) and LC/MS (Liquid-Chromatograph/Mass Spectrometer) method in order to detect microcystin in environmental sources. Among the three different primer sets tested for microcystin using three positive strains of Microcystis aeruginosa by Real-time PCR assay, only TOX2P/TOX2M primer pairs were able to detect Microcystis aeruginosa. According to the results of a survey carried out from June 2009 to September 2009, 11 out of 11 (100%) raw water samples were were found to have microcystin when the Real-Time PCR and LC/MS method was used, with total microcystin concentration ranging from 5.98~219.0 ${\mu}g/l$. A microcystin removal treatment process was used to ensure entire removal, by passing it through a BAC filtration step. It was concluded that real-time PCR assay can be used to estimate micrucystin detection more rapidly and easily than the LC/MS method.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.42.1-42.1
• /
• 2016

The formation process and the dynamical properties of a large-scale quasi-circular flare ribbon were investigated using the SDO AIA and HMI data along with data from RHESSI and SOT. Within one hour time interval, two subsequent M-class flares were detected from the NOAA 12371 that had a ${\beta}{\gamma}{\delta}$ configuration with one bipolar sunspot group in the east and one unipolar spot in the west embedded in a decayed magnetic field. Earlier M2.0 flare was associated with a coronal loop eruption, and a two-ribbon structure formed within the bipolar sunspot group. On the other hand, the later M2.6 flare was associated with a halo CME, and a quasi-circular ribbon developed encircling the full active region. The observed quasi-circular ribbon was strikingly large in size spanning 650" in north-south and 500" in east-west direction. It showed the well-known sequential brightening in the clockwise direction during the decay phase of the M2.6 flare at the estimated speed of 160.7 km s-1. The quasi-circular ribbon also showed the radial expansion, especially in the southern part. Interestingly, at the time of the later M2.6 flare, the third flare ribbon parallel to the early two-ribbon structure also developed near the unipolar sunspot, then showed a typical separation in pair with the eastern most ribbon of the early two ribbons. The potential field reconstruction based on the PFSS model showed a fan shaped magnetic configuration including fan-like field lines stemming from the unipolar spot and fanning out toward the background decayed field. This large-scale fan-like field overarched full active region, and the footpoints of fan-like field lines were co-spatial with the observed quasi-circular ribbon. From the NLFF magnetic field reconstruction, we confirmed the existence of a twisted flux rope structure in the bipolar spot group before the first M2.0 flare. Hard X-ray emission signatures were detected at the site of twisted flux rope during the pre-flare phase of the M2.0 flare. Based on the analysis of both two-ribbon structure and quasi-circular ribbon, we suggest that a tether-cutting reconnection between sheared arcade overarching the twisted flux rope embedded in a fan-like magnetic field may have triggered the first M2.0 flare, then secondary M2.6 flare was introduced by the fan-spine reconnection because of the interaction between the expanding field and the nearby quasi-null and formed the observed large-scale quasi-circular flare ribbon.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1261-1262
• /
• 2008

Laser-based crystallization techniques are ideally-suited for forming high-quality crystalline Si films on active-matrix display backplanes, because the highly-localized energy deposition allows for transformation of the as-deposited a-Si without damaging high-temperature-intolerant glass and plastic substrates. However, certain significant and non-trivial attributes must be satisfied for a particular method and implementation to be considered manufacturing-worthy. The crystallization process step must yield a Si microstructure that permits fabrication of thin-film transistors with sufficient uniformity and performance for the intended application and, the realization and implementation of the method must meet specific requirements of viability, robustness and economy in order to be accepted in mass production environments. In recent years, Low Temperature Polycrystalline Silicon (LTPS) has demonstrated its advantages through successful implementation in the application spaces that include highly-integrated active-matrix liquid-crystal displays (AMLCDs), cost competitive AMLCDs, and most recently, active-matrix organic light-emitting diode displays (AMOLEDs). In the mobile display market segment, LTPS continues to gain market share, as consumers demand mobile devices with higher display performance, longer battery life and reduced form factor. LTPS-based mobile displays have clearly demonstrated significant advantages in this regard. While the benefits of LTPS for mobile phones are well recognized, other mobile electronic applications such as portable multimedia players, tablet computers, ultra-mobile personal computers and notebook computers also stand to benefit from the performance and potential cost advantages offered by LTPS. Recently, significant efforts have been made to enable robust and cost-effective LTPS backplane manufacturing for AMOLED displays. The majority of the technical focus has been placed on ensuring the formation of extremely uniform poly-Si films. Although current commercially available AMOLED displays are aimed primarily at mobile applications, it is expected that continued development of the technology will soon lead to larger display sizes. Since LTPS backplanes are essentially required for AMOLED displays, LTPS manufacturing technology must be ready to scale the high degree of uniformity beyond the small and medium displays sizes. It is imperative for the manufacturers of LTPS crystallization equipment to ensure that the widespread adoption of the technology is not hindered by limitations of performance, uniformity or display size. In our presentation, we plan to present the state of the art in light sources and beam delivery systems used in high-volume manufacturing laser crystallization equipment. We will show that excimer-laser-based crystallization technologies are currently meeting the stringent requirements of AMOLED display fabrication, and are well positioned to meet the future demands for manufacturing these displays as well.

• Journal of The Korean Association of Information Education
• /
• v.5 no.2
• /
• pp.240-257
• /
• 2001

Although many attempts have been made to use the Internet for educational purposes, not many attempts have achieved their goals. Such failure is mainly due to the lack of understanding on the way to use the Internet. The goal of this research is to investigate the potentiality of the Project-Based Learning approach using the Internet(NetPBL) and the ways to utilize the NetPBL. The NetPBL can be utilized through various activities such as keypals, mentoring, use of resources, cooperative learning, publishing, survey and data analysis, cooperative problem solving, simulation, and social action. Such diversity of the NetPBL can create a problem-based, context-based and learner-centered environment, which takes various types of the Internet use. In spite of such potentiality, little is known on how to implement the NetPBL. On this point, this research attempts to synthesize instructional strategies to implement the NetPBL at the macro and the micro level. At the macro level, instructional process is divided into four steps such as plan, preparation, implementation and closure, and some instructional suggestions are made for each step. At the micro level, detailed instructional strategies are suggested for the facilitation of self-directed learning and cooperative learning.

• Journal of Korean Academy of Nursing
• /
• v.20 no.3
• /
• pp.368-380
• /
• 1990

A central issue in the development of nursing practice is to describe the phenomenon with which nursing is concerned. To identify the health problems which can be diagnosed and managed by the nurse is the first step to organize and ensure the development of nursing science. Therefore the academic world has been discussing the application of the nursing diagnosis in nursing practice as a means of improving quality of care. The objectives of this study were to develop a standardized nursing care plan for ten selected nursing diagnoses to form a database for computerized nursing service. The research approach used in the study was (1) the selection of the ten nursing diagnoses which occur most frequently on medical-surgical wards, (2) the development of a standardized nursing care plan for the ten selected nursing diagnoses, (3) application of the plan to hospitalize patients and evaluation of the content validity by the nurses, and (4) evaluation of the clinical effects after the use of the standardized nursing care plans. The subjects were 56 nurses and 395 hospitalized patients on two medical and two surgical unit. The results of this study were as follows ; 1) The ten selected nursing diagnoses for the development of the standardized nursing care plans were “PAIN, SLEEP DISTURBANCE, ALTERED HEALTH MAINTENANCE, ALTERATION IN NUTRITION, ANXIETY, CONSTIPATION, ALTERED PATTERNS OF URINARY ELIMINATION, DISTURBANCE IN BODY IMAGE, POTENTIAL FOR ACTIVITY INTOLERANCE AND ACTIVITY INTOLERANCE”. 2. The developed standardized nursing care plans included the nursing diagnosis, definition, defining characteristics, etiologic or related factors that contribute to the condition, recording pattern, desired outcomes and nursing orders (nursing interventions). 3. The plan was used with hospitalized patients on medical - surgical wards to test for content validity. The patient's satisfaction with the nursing care and nurses' job satisfaction were investigated to evaluate the clinical effects after the use of the standardized nursing care plans. A comparison of patient satisfaction with nursing care before and after the introduction of the standardized nursing care plans showed a statistically significant higher level of satisfaction with the standardized care plans. There was no difference in the level of job satisfaction expressed by the nursing staff before and after the standardized nursing care plans were introduced. However, when opinions about the use of the standardized nursing care plans were examined it was found that there was a positive effect on clarity in defining the nursing problems, determining nursing cost, more feasible goal setting, effective and systematic nursing records and indications for nursing research. The results of this study suggest that in order to increase the use of nursing diagnoses in the clinical area, it would be effective to select some wards as a pilot project, give the nurses training in the use of nursing diagnosis and develop and use the standardized nursing care plans. In addition to the ten diagnosis used in this study it is recommended that continual development of nursing diagnoses be done using diagnoses that are appropriate to Korea and testing them for validity through standardized care plans.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.6
• /
• pp.21-35
• /
• 2011

This study is basic research which aims to compare and analyze changes in rural areas in modern times. The main purpose of this study is to comprehend the characteristics of changes in the Korean rural landscape and to suggest the implications for preservation and maintenance of the rural landscape. To help in understanding the rural landscape systematically, it should be divided into six types: housing landscape, cultivation landscape, green landscape, waterside landscape, streetscape and symbolic and religious landscape. According to this step, the contents and the procedures of changes were analyzed generally. Based on the literature review and field survey, the styles of changes were deduced to be formation, alternation, relocation, damage and restoration on landscape elements. Lastly, it was concluded that complex changes of landscape in rural areas from the government's development policy have been continued from macroscopic changes like overall structure and system of landscape to microscopic changes like shape, material, size and color of each landscape element. Rural villages which have not had the government's development policy applied to them may not be appropriate for this study. However, this study has significance in that it can suggest the direction for desirable rural planning. Future studies need to consider landscape change through not only the development policy but also economic, social and cultural factors.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.1
• /
• pp.65-77
• /
• 2009

This study conducted a comparative analysis between Koreans and foreigners on how they feel of the 'Oreum' so that the data could be used to conserve and utilize 'Oreum' as a brand of Jeju, which is one of the natural and original sceneries of the island along with Halla Mountain. Four aerial photo slides were selected to be assessed among 18 overlooked views of 'Oreums' through quasi-preliminary and preliminary surveys. The assessment group was divided into native and foreigner groups. Image and preference were measured based on 7 step categorization on 26 adjectives, and factor analysis was implemented. The selected factors from factor analysis reflected that calmness was recognized as common image identification variable to natives and foreigners. However, foreigners choose 'dynamics', 'peculiarity' and 'grandeur' in order to explain the image while Koreans selected words in the order of 'attractiveness', 'grandeur', 'dynamics' and 'peculiarity'. This means Koreans identify the image of 'Oreum' as absolute beauty while foreigners see the dynamics and relative peculiarity as its attractive point. As a result of factor score, preference and multiple regression analysis, Koreans selected 'calmness', 'attractiveness' and 'dynamics' as important variables to explain preference. On the other hand, foreigners choose 'dynamics' and 'calmness' as well as 'evenness', 'peculiarity' and 'simplicity'. This represents that foreigners are highly influenced by the structural peculiarity and simplicity on the image preference.

• Journal of Agricultural Extension & Community Development
• /
• v.21 no.4
• /
• pp.1191-1226
• /
• 2014

The purpose of this study is to develop the evaluation criteria for the maintenance preserve of agriculture and rural heritage. The major steps for this study are 1) drafting the evaluation criteria for maintenance preservation of agriculture and rural heritage 2) verifying the evaluation criteria, and 3) determining the weighting values of the confirmed evaluation criteria. First, to derive the evaluation criteria for maintenance preservation of agriculture and rural heritage, the researcher reviewed the literature on the evaluation of agriculture and rural heritage, including research on the indexes of agriculture and rural heritage, the degree of the maintain preservation of heritage. A total of 31 evaluation criteria were selected. Second, to verify the selected 5 evaluation items and 31 evaluation indexes, the Delphi Method was implemented. Using traditional 3-step Delphi Method consisting of close-ended forms, with a panel of 41 experts, the researchers verified 5 evaluation items 31 evaluation indexes, two for each evaluation area validity. The confirmed evaluation areas are 5 items of management plan, management support system, surroundings of heritage, local network, heritage utilization and 31 criteria were preservation maintenance, performance plan, resident community composition, monitoring, act of parliament fulfillment, ecosystem management, landscape harmony, restoration and transmission plan and enhancement of residents' capability, etc. in the order. Through maintenance preservation evaluation index of agriculture and rural heritage, it can be utilized as sustainable development of plural resources.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.30-35
• /
• 2008

The purpose of this study is to analyze and define user's emotional satisfaction factors to the PC OS GUI image. The study is to investigate the relationship between PC OS GUI Image and Sensitive Vocabula교 based on user's emotional preference. 47 user preferred sensitive words are collected by the initial survey. Through the similarity test, 47 words are narrowed down to 20 comprehend words. The semantic differential methods is used in the final survey with 5 step questionnaire. From this process, user preferred the GUI design that is vocabularized as Clear, Easy, Safety, Stability. Additionally, the result shows that the image of Clear is related to Safety and the image of Easy is related to Stability. The result of the study could be used in design PC OS GUI as base data.