• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.277-283
• /
• 1995

For the development of low NO$_{x}$ gas burners aimed for absorption chiller/heater unit, three proto type burners of different capacity (265000, 498000, and 664000 kcal/h) have been manufactured through a combustion method of step-by-step air injection. In order to characterize the overall features of the flame and the properties of the emission gas, the temperature of the flame and the concentration of NO$_{x}$ and CO were determined. The main factors in the design of burners (the area of primary air injection, the diameter of secondary air injection hole, fuel nozzle diameter) were observed to increase linearly with the scale-up of burner capacity. The flame temperature profiles of the burners were observed to be almost similar, irrespective of their capacity. However, as their capacity increased, the flame temperature slightly increased and the hot region of the flames moved to ward the flame tip along with the expansion to the direction of radius. From the proto type units, the amount of their NO$_{x}$ emission was determined to be around 25 - 30 vppm(3% )$_{2}$) and the CO emission was less than 19 vppm (3% $O_{2}$).TEX>).

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.332-340
• /
• 2019

Due to the change in lifestyle, new sensible materials for sportswear and outdoor are needed. This study is conducted in order to obtain the data for sensible materials through nylon twist process. 1-step nylon twisting machine was used to set the optimum twist process. DSC measurements of twisted nylon yarn showed crystallization temperatures around 170℃ and melting temperatures around 220℃. Nylon 40D/13F DTY and Nylon 50D/48F DTY showed optimal results at 160℃, 1,500 T/M(Turns per meter), and Nylon 70D/68F DTY at 160℃, 1,200 T/M(Turns per meter) after 1-step twist process. Also, Nylon 40D/13F DTY was confirmed to have inter-layer property deviation of ±5 percent.

• Carbon letters
• /
• 제3권4호
• /
• pp.219-225
• /
• 2002

The two-step surface modifications of activated carbon was carried out to improve the adsorption capacity of toxic heavy metal ions in liquid phase. Physical and chemical properties of the as-received activated carbon (AC) and two kinds of surface-modified activated carbons ($1^{st}AC$ and $2^{nd}AC$) were evaluated through the BET analysis, surface acidity, and oxides measurements. Specific surface area and pore volume did not significantly change, but surface oxide-group remarkably increased by the surface modification. Equilibrium and batch adsorptions of the various metals, such as Pb, Cd, and Cr, using AC, $1^{st}AC$, and $2^{nd}AC$ were performed at initial pH 5. The adsorption capacity and rate of $2^{nd}AC$ were higher than those of AC and $1^{st}AC$. The carboxylic/sodium carboxylate complex groups were developed from the two-step surface modification of activated carbon, which strongly affected the adsorption of metal ions.

• 한국공간구조학회논문집
• /
• 제4권2호
• /
• pp.81-88
• /
• 2004

동적 불안정 좌굴현상에 관한 연구는 다소 발표되고 있으나, 주기성을 가진 하중하에서의 동적 좌굴을 다룬 연구는 그리 많지 않은 편이다. 주기성을 가진 하중하에서의 거동은 STEP 하중하에서의 거동과는 매우 다르리라 예상된다. 본 논문에서는 동적 불안정의 기본 메커니즘을 파악하기 위하여 양단 핀으로 고정된 정현형 아치가 정현형 조화하중을 받았을 때의 얕은 아치를 대상으로 한다. 얕은 아치의 동적 간접 좌굴 메커니즘을 파악하기 위하여 STEP 하중뿐만 아니라 정현형 조화하중일 때를 대상으로 한다. 동적 비선형 응답 특성을 알기 위하여 수치적분에 의해 기하학적 비선형 운동방정식을 유도한다. 여기서 얻어진 비선형 변위 응답으로 FFT(Fast Fourier Transform)에 의한 연속 응답 스펙트럼을 구해 동적 불안정 특성에 관해서 분석한다.

• 대한전자공학회논문지
• /
• 제26권5호
• /
• pp.60-70
• /
• 1989

본 연구는 인버터로 구동되는 유도전동기에서 발생되는 토오크 맥동을 표현하는, 고조파 토오크 함수 HTF(harmonic torque function)를 제안하고, 컴퓨터 시뮬레이션과 실험을 통하여 HTF의 타당성을 입증하였다. 제안된 HTF는 고조파 전류의 크기 뿐만 아니라 위상까지 고려하므로서 부하변동에 무관한 고조파 토오크 함수가 되었으며, 이를 six-step. SPWM 및 TPWM의 펄스 폭 제어 인버터에 적용하여 비교하였다. 그 결과 PAWM 인버터에서의 우수한 제어방법이 선택되었다. 한 주기당 펄스수가 9이하에서는 six-step이, 출력전압 크기와 토오크 맥동의 측면에서, SPWM 및 TPWM보다 우수함을 알 수 있었다.

• International Journal of Human Ecology
• /
• 제8권2호
• /
• pp.61-74
• /
• 2007

Adolescents from stepfamilies have been considered as at-risk group of mental and behavioral problems. This study aims to determine whether there is a group difference of emotional or behavior disturbance between young people in step and non-stepfamilies and whether risk factors linked to emotional and behavior symptoms of young people in stepfamilies are different from those of girls in non-stepfamilies. The study used 'the Mental Health of Children and Young People in Great Britain, 2004 (MHCYP 2004)'. In the MHCYP 2004, the Rutter Problem Behavior Questionnaire, the Strengths and Difficulties Questionnaire (SDQ), and Child Behavior Checklist (CBCL) were administered to parents, teachers, and children drawn from young people aged 5-17 living in private households in England, Scotland (including the Highlands and Islands) and Wales. The total of 2,471 samples of aged 13 through 17 from them were selected for this study. The selected data was analyzed using SPSS. The findings showed group differences in emotional and behavior symptoms between young people in step and non-stepfamilies: Young people from stepfamilies were more emotional and have behavioral disturbances than those from nonstepfamilies. The result also confirmed the different risk factors associated with emotional behavior problems. The study supports that professionals need to develop effective treatment and preventive approaches designed for young people in stepfamilies who may have different risk factors different from those in non-stepfamilies.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.961-969
• /
• 2004

Most manufacturing companies are trying to develop a competitive product by increasing the quality, shortening time to market and reducing the cost of a product. Collaborators related to the development of a new product want to confirm geometric forms and dimensions during the design process, as well as to verify dimensional errors of a product during the fabrication process. Objective of this paper is the development of a collaborative design and dimension verification system on the Internet. STEP files obtained from the design process are used for the design and dimension verification. Functions of the design and dimension verification modules are constructed over the ActiveX control using the visual C/sup ++/ and OpenGL. By using mark up functions over the Internet, collaborators check geometries, interferences, dimensional errors, human factors and form errors, as well as share their design ideas and opinions with XML rapidly and remotely. The usefulness of the developed system is confirmed through case studies.

• 복식
• /
• 제65권4호
• /
• pp.91-108
• /
• 2015

As a solution to the wasteful consumption of resources in fashion design, this research aims to develop a process guideline for ZWF Design Methods from an educational perspective. After selecting the Jigsaw Puzzle, Subtraction Cutting, and Layer Methods as representative ZWF Methods, an application experiment was designed to deduct each Method's process, characteristics, needs, and improvement points. Its results were analyzed through action protocol analysis, expert evaluation, and qualitative analysis. Based on the analysis, this research proposed a ZWF guideline and a step-by-step guide suitable to the students' needs. By following the guideline, students can use the chosen ZWF Method to create a planned or an accidental design. In addition, they can practice ZWF effectively step by step in the order of Layer, Jigsaw Puzzle, and Subtraction Cutting. Thus, this research can provide the basis for ZWF education, which can lead to expanded application of ZWF in the future and reduce textile waste.

• 한국전산유체공학회지
• /
• 제10권2호
• /
• pp.30-37
• /
• 2005

To evaluate LBM we performed the simulation of the unsteady two dimensional flow over a square cylinder in a channel in moderate Reynolds number range, $100\~500$ by using LBM and Fractional-Step method. Frist of all we compared LBM solution of Poiseuille flow applied Farout and periodic boundary conditions with the analytical solution to verify the applicability of the boundary conditions. For LBM simulation the calculation domain was formed by structured 500x100 grids. Prescribed maximum velocity and density inlet and Farout boundary conditions were imposed on the in-out boundaries. Bounceback boundary condition was applied to the channel and the cylinder waifs. The flow patterns and vortex shedding strouhal numbers were compared with previous research results. The flow patterns by LBM were in agreement with the flow pattern by fractional step method. Furthermore the strouhal number computed by LBM simulation result was more accurate than that of fractional step method through the comparison of the previous research results.

• 경영과학
• /
• 제18권2호
• /
• pp.125-134
• /
• 2001

This paper is concerned with the development of a GIS-based distribution system with service consideration. The proposed model could be used for a wide range of logistics applications in planning, engineering and operational purpose for logistics system. This research addresses the formulation of those complex prob1ems of two-echelon logistics system to plan the incorporating supply center locations and distribution problems based on GIS. We propose an integrated logistics model for determining the optimal patterns of supply centers and inventory allocations (customers) with a three-step sequential approach. 1) First step, Developing GIS-distance model and stochastic set-covering program to determine Optimel pattern of supply center location. 2) Second step, Optimal sector-clustering to support customers. 3) Third step, Optimal vehicle rouse scheduling based on GIS, GIS-VRP In this research we developed GUI-tree program, the GIS-VRP provide the vehicle to users and freight information in real time. We applied a set of sample examples to this model and demonstrated samp1e results. It has been found that the proposed model is potentially efficient and useful in solving multi-depot problem through examples. However the proposed model can provide logistics decision makers to get the best supply schedule.