• 대한물리의학회지
• /
• 제9권3호
• /
• pp.285-291
• /
• 2014

PURPOSE: The purpose of this study was to propose clinical criteria to differentiate patients who are able to perform the step-through-step gait pattern in chronic stroke patients. METHODS: Sixty patients with chronic stroke patients participated this study. To differentiate patients who could perform the step-through-step gait pattern, age, gender, and causes of stroke were noted, a Chedoke-McMaster (CM) damage list, Fugl-Meyer (FM) assessment scales and the Berg Balance Scale (BBS) were determined. A 10 meter gait test and Timed Up and Go (TUG) test were conducted to determine the differences in gait speed and dynamic balance between patients walking with or without canes in the step-through-step gait pattern group. RESULTS: There was no significant statistical difference in age, gender, and stroke type between all subjects. There were significant differences in the CM scale for postural and lower extremities, and FM scale for lower extremities and BBS. The dynamic balance ability and gait speed showed significant differences between the subjects in the step-through-step gait pattern with or without a cane during gait. CONCLUSION: CM and FM scales for the lower extremities and postural control, as well as BBS scales, can be used as criteria to differentiate patients who are able to perform the step-through-step gait pattern. These results can also be used to provide beneficial information to patients that are walking with canes.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.768-779
• /
• 1995

This study was performed to investigate the effect of root canal shaping techniques on the change of the shape of prepared root canal. 40 mesiobuccal canals of recently extracted mandibular 1st and 2nd molars were divided into 4 groups and shaped by step-down/balanced force technique, step-down/step-back technique, step-back technique and conventional technique respectively. The change of the shape of root canal was traced by superimposing the radiographs obtained before and after shaping of each root canal. The results were as follows. 1. By the experimented techniques except conventional technique, the root canals were more shaped in convex side of apical area and in concave side of most curved and coronal area than in the other sides(P<0.05). By conventional technique, the root canals were more shaped in convex side than in convave side from apex to orifice(P<0.05). 2. By step-down/balanced force technique, the cancave sides at C and D points of proximal view and C point of clinical view were more shaped than the convex side(P<0.05). Through the entire canal, the concave side was more shaped than the convex side in proximal view(P<0.01). But there was no statistical difference between both sides in clinical view. 3. By step-down/step-back technique, the change of root canal shape was not statistically different in concave and convex sides at each point of both views(P>0.05). And through the entire canal in proximal view, there was no statistical difference in shaping percentage between both sides. But through the entire canal in clinical view, the concave side was more shaped than the convex side(P<0.1). 4. By step-back technique, the convex side at B point of clinical more shaped than the other sides(P<0.05). Through the entire canal in proximal and clinical views, there was no statistical difference in shaping percentage between both sides. 5. Comparing the total shaping percentage among techniques, that in conventional technique was the greatest numerically, and followed by the percentages in step-down/step-back, step-down/balanced force and step-back technique. But, in proximal view, shaping percentages were not statistically different among techniques(P>0.05, ANOVA test). In clinical view, shaping percentages in step-back and conventional techniques were statistically different(P<0.01, ANOVA test). * Proximal view: radiograph taken in mesiodistal direction. * Clincal view: radiograph taken in faciolingual direction. A point : 1mm point from radiographic apex B point : center point between A and C points C point : most curved point of root canal D point : center point between C point and canal oriffice.

• 전력전자학회논문지
• /
• 제24권1호
• /
• pp.1-8
• /
• 2019

In this study, a maximum power point tracking (MPPT) algorithm based on the perturb and observe (P&O) method with variable step size is proposed to improve the dynamic response characteristic of MPPT, using the existing P&O method. The proposed algorithm, which we verified by simulation and experiment, can track the maximum power point (MPP) through duty control and consisted of three operation modes, namely, constant voltage mode, fast mode, and variable step mode. When the insolation is constant, the voltage variation of the operating point at the MPP is reduced through the step size reduction of the duty in the variable step mode. Consequently, the vibration of the operating point is reduced, and the power generation efficiency is increased. When the insolation changes, the duty and the photovoltaic (PV) voltage are kept constant through the constant voltage mode. The operating point then rapidly tracks the new MPP through the fast-mode operation at the end of the insolation change. When the MPP is reached, the operation is changed to the variable step mode to reduce the duty step size and track the MPP. The validity of the proposed algorithm is verified by simulation and experiment of a PV system composed of a PV panel and a boost converter.

• 전기의세계
• /
• 제29권1호
• /
• pp.58-64
• /
• 1980

In this paper, this objective is to obtain the mathematical model which describes the dynamic characteristics of variable reluctance(VR) step motor, the most important and most widely used motor in practice. In the development of the mathematical model for VR step motor, first the general nonlinear dynamic equations which describe the N-phase VR step motor are derived. These general equations are then applied to the multiple-step type of VR step motor in case, for simplicity, maynetic saturation and core lossess in the iron are neglected. These nonlinear dynamic equations are numerically analysed by the computer simulation, through which the performance characteristics of a step motor undertest are investigated under the various operating conditions.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.44-46
• /
• 2012

유수의 기업체가 사이버공격을 받아 개인정보를 유출당하는 피해 사례가 속출하고 있다. 또한 금전이득의 획득이나 사회적 혼란 유발 등을 목적으로 계획된 해킹사례가 지속적으로 증가하고 있다. 본 논문에서는 IT서비스 기업들이 수행하는 프로젝트 단계별 주요 보안 활동 사례를 파악한다. 이를 통하여 실제 프로젝트 단계별로 적용할 수 있는 보안 방안을 제시하고자 한다.

• 산업공학
• /
• 제14권1호
• /
• pp.95-105
• /
• 2001

Previous work measurement methods need much time and effort of time study analysts because they have to measure required time through direct observations. In this study, we propose a method which efficiently measures standard times without involvement of human analysts using digital image processing techniques. This method consists of two main steps: motion representation step and cycle segmentation step. In motion representation step, we first detect the motion of any object distinct from its background by differencing two consecutive images separated by a constant time interval. The images thus obtained then pass through an edge detector filter. Finally, the mean values of coordinates of significant pixels of the edge image are obtained. Through these processes, the motions of the observed worker are represented by two time series data of worker location in horizontal and vertical axes. In the second step, called the cycle segmentation step, we extract the frames which have maximum or minimum coordinates in one cycle and store them in a stack, and calculate each cycle time using these frames. In this step we also consider methods on how to detect work delays due to unexpected events such as operator's escapement from the work area, or interruptions. To condude, the experimental results show that the proposed method is very cost-effective and useful for measuring time standards for various work environment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.567-571
• /
• 1996

The objective of STEP is to provide neutral mechanism capable of describing product data through the life cycle of a product, independent form any particular systems. This paper describes an STEP application program that can display the three-dimensional shape based on b-spline surface and the data which defines configuration of the product. The developed program is based on the STEP part 203 “Configuration controlled design”.

• 전력전자학회논문지
• /
• 제25권1호
• /
• pp.29-36
• /
• 2020

In this study, a variable step algorithm is proposed on the basis of the perturb and observe method. The proposed algorithm can follow the maximum power point (MPP) quickly when solar irradiance changes rapidly. The proposed technique uses the voltage change characteristic at the MPP when the environment changes because of insolation or temperature. The MPP is tracked through the voltage control using a variable step method. This method determines the sudden change of solar irradiance by setting the threshold value and operates in fast tracking mode to track the MPP rapidly. When the operation point reaches the MPP, the mode switches to the variable step mode to minimize the steady state error. In addition, the output disturbance is decreased through the optimization of the control method design. The performance of the proposed MPPT algorithm is verified through simulation and experiment.

• 한국전자거래학회지
• /
• 제9권3호
• /
• pp.57-77
• /
• 2004

본 연구의 목적은 건설도면정보 공유를 위한 XML 스키마 개발 및 STEP 연계기술을 개발하는 것이다. 이를 위해 STEP/AP202를 바탕으로 도면정보를 표현하는 STEP 데이터 모델 개발, ISO 표준도면을 관리할 수 있는 STEP 데이터 검색기 개발, 그리고 벡터형식으로 표현되는 도형정보와 각 도형요소가 연관되는 외부적 기술 자료들이 상호 유기적으로 통합될 수 있는 구조를 지원하기 위한 XML 스키마를 개발하였으며, 자재정보와 법규체크를 대상으로 STEP과 XML의 상호 연계를 통한 도면정보 공유방안을 제시하였다. 따라서 제안된 건설도면정보 공유방안을 통해 건설산업 전반에서 발생하는 건설도면을 포함한 각종 외부문서, 기술문서들의 상호 연계로 건설설계 업무지원 및 정보의 최적화된 관리가 가능할 것이다.

• 한국주거학회논문집
• /
• 제10권2호
• /
• pp.247-257
• /
• 1999

This study is aimed to propose the evaluation model of forecasting visual quality of apartment buildings, which would be a useful tool to make the architectural concepts corresponding to user needs. This study was carried out through the four-step experiments as follows. The first step is to take the user's visual evaluation construct. To do this, the 22 adjective phrases were extracted, which were applicable to all apartment buildings. The second step is to analyze the user's visual preference, which is measured by the user's psychological quantity on the apartment buildings by S. D.(Semantic Differential) Method. The third step is to analyzethe five psychological-factors obtained from the Factor Analysis. The perceptual images on the 41 experimental subjects were checked up through evaluating and analyzing the factor scores of each subjects for each psychological-factor. The fourth step is to analyze, the similarity of various characters in a building, which is mirrored on the user's psychological quantity and how buildings are grouped by it.