• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1754-1766
• /
• 1993

The application of VXIbus system, an Industry standard, is rapidly spreading with its ability to offer the easiness of integration from GPIB and the fast data transmission from VMEbus system. Compared with VXIbus Register Based Device, VXIbus Message Based Device has a drawback In the aspect of speed. But it is possible to utilize high level ASCII commands to control a Message Based Device, therefore system integration is much easier with Message Based Device than with Register Based Device. And, the FFT analyzer is an instrument for signal analysis which can be inexpensively implemented to be fast and have high resolution. Its wide ability of analysis presents numerous application. So, it is necessary to apply VXIbus system to FFT analyzer. In this paper, the implementation of FFT analyzer is performed using a DSP module and by implementing all A/D conversion circuit and a control module which performs VXIbus interface. The device can be controlled by Slot0 Commender which supports VXIbus Shared Memory Protocol through VXIbus.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.718-723
• /
• 2017

We propose a pilot hopping scheme that improves the limited system capacity due to pilot contamination in multi-cell environment with large-scale antenna arrays at a base station, assuming the infinite number of antennas. In the conventional fixed pilot scheme, each user obtains the same signal-to-interference ratio (SIR) over a long period of time. Therefore, a user with strong interference has continuously low SIR which degrades its service quality. In the proposed pilot hopping scheme, different pilot signals are used for each time slot, and different amounts of interference are received every time. When such a pilot hopping technique is applied, the SIR fluctuates at every time slot. When the Hybrid Automatic Repeat & reQuest (HARQ) technique is applied in such a channel, the outage probability and transmission rate are improved. We show that there is the performance gain of the proposed scheme over the conventional scheme through computer simulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.3
• /
• pp.388-402
• /
• 2000

The radiation characteristics of leaky antenna from the dielectric-coated conducting cylinder with periodic corrugation are investigated theoretically for the infinite and finite periodic structures. For the infinite periodic structure, mode-matching method is applied. The integral equation is derived for the finite periodic structure by use of the Fourier transform and mode expansion and a simultaneous linear equation is obtained. The influences of the corrugation slot width, corrugation depth, dielectric thickness, cylinder radius, and finite corrugation number on the radiation characteristics (leakage constant, phase constant, and radiation pattern) are investigated. The results of the finite periodic corrugations are compared with those of the infinite extent structure and good agreement is found. To reduce high side lobe levels of the uniform finite periodic structure, tapering process on the beginning and end section of antenna and nonuniform quasi-period slot arrays are considered. Especially, for the corrugation period, width and depth used for a corrugated surface wave antenna, through the proper tapering process, end-fire radiation pattern with reduced side lobe levels is given.

• Journal of Periodontal and Implant Science
• /
• v.40 no.2
• /
• pp.76-85
• /
• 2010

Purpose: This study aimed to evaluate the effectiveness of the modified sinus floor elevation technique described hereafter as a "hybrid technique," in 11 patients with severely resorbed posterior maxillae. Methods: Eleven patients who received 22 implants in the maxillary premolar and molar areas by the hybrid technique were enrolled in this study. A slot-shaped osteotomy for access was prepared on the lateral wall along the lower border of the sinus floor. The Schneiderian membrane was fully reflected through the lateral slot. Following drilling with the membrane protected by a periosteal elevator, the bone was grafted. All implants were placed simultaneously with sinus augmentation. The cumulative success rate was calculated and clinical parameters were recorded. Radiographic measurements were performed. Results: All implants were well maintained at last follow up (cumulative success rate=100%). The mean residual bone height, augmented bone height, crown-to-implant ratio, and marginal bone loss were $4.1{\pm}1.64mm$, $8.76{\pm}1.77mm$, $1.21{\pm}0.34mm$, and $0.34{\pm}0.72mm$, respectively. Conclusions: Simultaneous implant placement with sinus augmentation by hybrid technique showed successful clinical results over a 2-year observation period and may be a reliable modality for reconstruction of a severely resorbed posterior maxilla.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.397-401
• /
• 2005

In this paper, a slot-coupled microstrip antenna with switchable polarization is proposed for the polarization diversity applications in the complicated communication environment. The proposed antenna is fed by a microstrip line through one of two slots located with the interval of $\lambda{g}/4$ in the ground plane. By switching the PIN diode between opened and shorted termination which is located at the tip of the microstrip line, the switching function between horizontal and vertical polarization was confirmed experimentally. The measured resonant frequencies of the fabricated antenna are $2.41\;\cal{GHz}\;2.40\;\cal{GHz}$ and the cross polarization levels are $19\;\cal{dB},\;23\;\cal{dB},\;the\;-10\;\cal{dB}$ return loss bandwidths are $95\;\cal{MHz}\;100\;\cal{MHz}$ in horizontal and vertical polarization, respectively, and the antenna gain is almost $6\;\cal{dBi}$.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.934-940
• /
• 2019

In this paper, we propose a Reverse Differential Chaos Shift Keying (RE-DCSK) system for low cost, high reliability and high data rate non-coherent chaos communication .In RE-DCSK, reference signals are transmitted in the first slot as in the conventional differential chaos shift modulation scheme (DCSK) and in the second slot a time inversion block strengthens the autocorrelation of the chaos signal and uses the orthogonality of the two signals to obtain the information signal. RE-DCSK enables relatively double the data rate compared to DCSK and also improves the security of communications without any additional cost of system complexity.To prove its effectiveness, we analyze it through Rayleigh fading channel and additional white Gaussian noise (AWGN) channel based on the derived BER expression. The BER performance of the proposed system is improved when compared with the CDSK and DCSK system using AWGN channel.

• Journal of radiological science and technology
• /
• v.46 no.3
• /
• pp.219-229
• /
• 2023

In this study, basic characteristics such as reproducibility, linearity, and directionality of RPL glass dosimeters were evaluated to improve the reliability of dose evaluation through RPL glass dosimeters, and uncertainty elements such as sensitivity by glass element and magazine slot sensitivity were evaluated. Using a mathematical model to calibrate the measured values of the RPL glass dosimeter, the measurement uncertainty was calculated assuming an example. As a result of the characteristic evaluation, the RPL glass dosimeter showed excellent performance with a standard deviation of ±1% (1 SD) for the reproducibility of the reading process, a coefficient of determination for linearity of 0.99997. And the read-out of the RPL glass dosimeter are affected by the circular rotation direction of the glass dosimeter during irradiation, fading according to the period after irradiation, the number of laser pulses of the reader, and response degradation due to repeated reading, it is judged that measurement uncertainty can be reduced by irradiation and reading in consideration of these factors. In addition, it was confirmed that the dose should be determined by calculating the correction factors for the sensitivity of each element and, the sensitivity of each reading magazine slot. It is believed that the reliability of dosimetry using glass dosimeters can be improved by using a mathematical model for correction of glass dosimeter readings and calculating measurement uncertainty.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1855-1869
• /
• 1993

For the traditional ALOHA system without capture, the Markov chain obtained using the number of backlogged users at each slot if shown to be non-ergodic. So the infinite population ALOHA with fixed retransmission probabilities is unstable for any choice of the arrival rates and retransmission probabilities. The capture ALOHA system of also shown to be unstable for any arrival rate unless it has perfect. In this paper, we study a stabilization policy for capture ALOHA system that controls the retransmission probabilities and prove the stability of its multidimensional Markovian model by empolying a continuous Lyapunov function, and thus identify the stability region. We also study a delay performance through computer simulation th show the stability for any input rate below the maximum achievable channel throughput.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1664-1667
• /
• 2003

Aperture-coupled microstrip antenna is one type of microstrip antennas. This type of antenna has bandwidth wider than simple microstrip antenna. Herein, we use two substrates, that have the same dielectric constant 2.47 (PTFE-quartz) in which upper substrate is a rectangular patch. The microstrip patch is fed by a microstrip line which is printed on lower substrate, through an aperture or slot in the common ground plane of patch and microstrip feed. This antenna is analyzed by using Finite Difference Time Domain (FDTD) method the specific design frequency 10 GHz and match impedance is 50 ohms. The simulation results of its characteristics are input impedance, return loss, VSWR and radiation patterns respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.2
• /
• pp.272-281
• /
• 2009

The effect of swirl on the flow characteristics in a sudden expansion tube was examined experimentally by using 3D PIV(particle image velocimetry) to capture the velocity profiles. The swirling flow of water through a sudden 1:2 axisymmetric expansion has previously been studied experimentally within a horizontal round tube. A kind of tangential slot is used as a swirl generator for swirling flow and a honey comb is used for without swirl flow. The work with the swirl and without swirl results are compared to each other at the same Reynolds number. Liquid crystal was employed to measure temperature profiles and heating coil used for heat transfer with and without swirl flow. And then the Nusselt number ratoes(Nu/Nudb) are calculated along the test section.