• Journal of the Korea Society of Computer and Information
• /
• v.16 no.4
• /
• pp.119-126
• /
• 2011

When ZigBee network supports beacon transmission mechanism, ZigBee devices have the restriction of the transmission range from the coordinator. On the contrary, when it does not support beacon transmission, it is not easy to save the energy through turning into sleep mode. This paper proposes active slot allocation method that allocates a transmission time and does not use the beacon transmission mechanism. It is based on the ZigBee's distributed address assignment mechanism and supports the scalability. This paper explains the active slot structure and the allocation order and describes the operation of ZigBee devices. We verify the proposed mechanism through the simulation and show the performance evaluation. It can be useful on the industrial automation and the environmental surveillance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.209-215
• /
• 2017

In this paper, an antenna having 2-axes cross monopulse for Ka band millimeter-wave seeker is designed and antenna performance is verified through vacuum-brazing method for fabrication and measurement. Also, by designing and manufacturing a waveguide circulator the antenna including the circulator is measured. Radiating part of the antenna takes optimized slot lengths and offsets from Elliot's array synthesis procedure using the generic algorithm and feeding part for cross monopulse axes uses the folded waveguide to optimize the S-parameter result. Based on this method, the antenna has 33.3 dBi gain, $3.5^{\circ}{\pm}0.5^{\circ}$ beamwidth, below -23 dB SLL through fabricating and measuring. It is found that antenna characteristics is similar to design results.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.3
• /
• pp.104-114
• /
• 2022

The purpose of using coolant in machining is both to increase a tool life and also to prevent product deformation and thus, stabilize the surface quality by lubricating and cooling the tool and the machining surface. However, a very small amount of cutting mist should be used because chlorine-based extreme pressure additives are used to generate environmental pollutants in the production process and cause occupational diseases of workers. In this study, medical titanium alloy (Ti-6Al-7Nb) was subjected to a processing experiment by selecting factors and levels affecting cutting power in the processing of the Aerosol Dry Lubrication (ADL) method using vegetable oil. The machining shape was a slot to sufficiently reflect the effect of the cutting depth. As for the measurement of cutting force, the trend of cutting characteristics was identified through complete factor analysis. The factors affecting the cutting force of ADL slot processing were identified using the reaction surface analysis method, and the characteristics of the cutting force according to the change in factor level were analyzed. As the cutting speed increased, the cutting force decreased and then increased again. The cutting force continued to increase as the feed speed increased. The increase in the cutting depth increased the cutting force more significantly than the increase in the cutting speed and the feed speed. Through the reaction surface analysis method, the regression equation for predicting cutting force was identified, and the optimal processing conditions were proposed. The cutting force was predicted from the secondary regression equation and compared with the experimental value.

• Journal of information and communication convergence engineering
• /
• v.14 no.1
• /
• pp.21-25
• /
• 2016

N-screen is a promising technology to improve support for multimedia multicasting, content sharing, content mobility, media scalability, and seamless mobility. In this paper, the WiMedia distributed-MAC (D-MAC) protocol is adopted for development of a seamless N-screen wireless service. Furthermore, to provide a multi-hop, one source multi-use N-screen service through point to point streaming in a seamless D-MAC protocol, a dynamic multi-frame transmission technology is proposed. In this technology, a dynamic time slot allocation scheme and a multi-hop resource reservation scheme are combined. In the proposed dynamic time slot allocation scheme, two thresholds, a hard threshold and a soft threshold, are included to satisfy the power consumption and delay requirements. A multi-frame DRP reservation scheme is proposed to minimize end-to-end delay during the multi-hop transmissions between N-screen devices. The proposed dynamic multi-frame transmission scheme enhances N-screen performance in terms of the multi-hop link establishment success rate and link establishment time compared to the conventional WiMedia D-MAC system.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.4
• /
• pp.9-19
• /
• 2008

In this paper, it is studied anti-collision algorithm based on the transmission protocol for RFID baseband system of the lSO/IEC 18000-6 Type-C regulation and designed the baseband part of RFID reader system using FPGA. To compensate this weak point of the slot random aloha algorithm which must have a long time to be dumped before deciding an appropriate slot size according to the number of surrounding tag, we suggested how to apply Bit By Bit algorithm to be able to recognize the tag when the tag is clashing. The design of the baseband part in the RFID reader system is accomplish by use of the ISE9.1i and I made an experiment on it targeting Spartan2. Construction verification is measured each block through Logic Analyzer and I can verify it has no error. I also compared and analyzed the performance between proposed algorithm and past algorithm and verified the improvement of performance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.2
• /
• pp.199-208
• /
• 2018

This paper investigated the effect of unevenly magnetized magnets to the cogging torque. First, through qualitative analysis of cogging torque, the generation of slot harmonic component is explained. Second, it is found that the slot harmonic can be suppressed by locating the magnets under specific condition even if the magnets are irregularly magnetized respect to each other. Finally, it is verified with the experimental result.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.172-176
• /
• 2008

This paper presents a novel feeding structure of the triple-band internal antenna which covers CELLVLAR/DCS/US-PCS bands. The proposed antenna consists of a U-slot patch radiator with a shorting post connected with ground plane and symmetric feeding lines with respective a feeding and shorting posts on both faces of the fixed FR-4 substrate. Through the simulation and experimental results, the proposed antenna is confirmed to have the features of less interference with a human head/body, broad bandwidth, desirable radiation patterns and efficiency for triple-band applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.2
• /
• pp.298-305
• /
• 1997

In this paper, the radiation characteristics of a slot annenna in conduction cylinder covered with a moving isotropic plasma layer are analyzed. Integral representations of the eletromagnetic fields in the spectral domain radiated through the plasma layer are derived and converted into the fields in the spacial domain by saddle-point ingegration. Radiation null which brings about distorion in the radiation parrern is explained by the zero of integrand in an asymptotic integral as a function of plasma and velocity parameters. Numerical results for a radiation null calculated from various plasma and velocity parameters correspond to the results of planner structure.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1712-1720
• /
• 1989

We propose a new radiating structure composed of a strip and a slot excited by an ideal current source, and electromagnetic analysis for the structure is presented. By the analysis procedure which is based upon equivalence formulated. Through the numerical computations to solve the equations by employing the method of moments, we ascertained that the suitable choice of the location and the size of strip guarantee the improvement of the radiation characteristics of antenna.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.9
• /
• pp.437-442
• /
• 2006

Cogging torque, the primary ripple component in the torque generated by permanent magnet (PM) motors, is due to the slotting on the stator or rotor. This article shows the reduction of cogging torque in a novel axial flux permanent magnet (AFPM) motor through the various design schemes. 3D finite element method is used for the exact magnetic field analysis. The effects of slot shapes and skewing of slot on the cogging torque and the average torque have been investigated in detail.