• ETRI Journal
• /
• 제13권4호
• /
• pp.2-9
• /
• 1991

Buried-heterostructure lasers are more difficult to fabricate than weakly index guided or gain guided lasers. However, these strongly index guided structures are most suitable for a source of lightwave transmission systems. But, for conventional etched mesa buried heterostructure lasers, the regrowth of InP blocking layer is difficult and irreproducible. So, there are inevitable leakage currents flowing outside the active region resulting poor performance. To eliminate these problems, we used a planar buried heterostructure. As a results, the average threshold current was 28mA and the differential quantum efficiency was about 20% per facet for $1.3\mum$ GaInAsP/InP PBH-LD. The initial forward leakage current was not exceeding $1\muA$ and the reverse voltage for $-10\muA$ was -3V~-5V, these are improved figure of 1mA~10mA and -1V~-3V for EMBH laser diode. The chip modulation bandwidth was more than 2.4GHz for $1.5I_th$.

• 전자공학회논문지D
• /
• 제35D권12호
• /
• pp.68-74
• /
• 1998

본 논문에서는 electron cyclotron resonance (ECR) N₂O-플라즈마 산화막을 게이트 산화막으로 사용한 다결정 실리콘 박막 트랜지스터 (TFT)의 성능과 단채널 특성에 대하여 연구하였다. ECR NE₂O-플라즈마 게이트 산화막을 사용한 소자는 열산화막을 이용한 경우에 비해 우수한 성능과 억제된 단채널 효과를 나타낸다. 얇은 ECR N2O-플라즈마 산화막을 사용하여 n채널 TFT의 경우 3 ㎛, p채널 TFT의 경우 1㎛ 게이트 길이까지 문턱 전압 감소가 없는 소자를 얻었다. 이러한 특성 향상은 부드러운 계면, passivation 효과, 그리고 계면과 박막 내부에 존재하는 강한 Si ≡ N 결합 등에 기인한다.

• 전자공학회논문지A
• /
• 제29A권9호
• /
• pp.36-45
• /
• 1992

The Modified Multi-Quantum Well(MMQWAl) structures have been grown by Mental-Organic chemical Vapor Deposition(MOCVD) method and stripe type MMQW laser diodes have been investigated. In the case of GaAs/AlGaAs superlattice and quantum well growth by MOCVD, the periodicity, interface abruptess, Al compositional uniformity and layer thickness have been confirmed though the shallow angle lapping technique, double crystal x-ray diffractometry (DCXD) and photoluminescence (PL) measurement. stripe-type MMQW laser diodes have been fabricated using the process technology of photolithography, chemical etching, ohmic contact, back side removing and cleaving. As the result of the electrical and opticalmeasurement of these laser diodes, we have achieved the series resistance of $1[\Omega}~2{\Omega}$ by current-voltage measurements, the threshold current of 200-300mA by currnt-light measurements and the lasing wavelength of 8000-8400$\AA$ by lasing spectrum measurements.

• 전기전자학회논문지
• /
• 제7권2호
• /
• pp.135-143
• /
• 2003

본 논문에서는 다치논리(Multiple-Valued Logic : MVL)를 위한 데이터 변환기의 설계방법에 대해서 논의한다. 3.3 v의 단일 전원의 4 디지트의 CMOS 아날로그 4치 변환기(Analog to Quaternary Converter : AQC)와 4치 아날로그 변환기(Quaternary to Analog Converter)를 뉴런모스를 사용한 다운리터럴회로(Down-Literal Circuit : DLC)를 사용하여 설계하였다. 뉴런모스 다운리터럴회로는 제안된 AQC와 QAQ가 4개의 전압 레벨값을 출력과 입력으로 사용하게 하며, 소자의 다중 문턱전압 특성을 갖게한다. 제안된 AQC -QAC 회로는 구조면에서 전전력 소모의 특성을 갖는다.

• 한국전기전자재료학회논문지
• /
• 제24권9호
• /
• pp.693-696
• /
• 2011

Recently, amorphous oxide semiconductors (AOSs) based thin-film transistors (TFTs) have received considerable attention for application in the next generation displays industry. The research trends of AOSs based TFTs investigation have focused on the high device performance. The electrical properties of the TFTs are influenced by trap density. In particular, the threshold voltage ($V_{th}$) and subthreshold swing (SS) essentially depend on the semiconductor/gate-insulator interface trap. In this article, we investigated the effects of Ar plasma-treated $SiO_2$ insulator on the interfacial property and the device performances of amorphous indium gallium zinc oxide (a-IGZO) TFTs. We report on the improvement in interfacial characteristics between a-IGZO channel layer and gate insulator depending on Ar power in plasma process, since the change of treatment power could result in different plasma damage on the interface.

• 센서학회지
• /
• 제14권5호
• /
• pp.331-336
• /
• 2005

The influence of water molecule on the electrical properties of single-walled carbon nanotube field effect transistors (SWNT-FETs) was reported. Conductance suppression was observed with the increase of the humidity. This can be explained by doping of the SWNT-FETs, which has p-type semiconductor characteristic, with the water molecules acting as an electron donor. However, after 65 % of humidity, conductance of the SWNT-FETs started to increase again, due to the opening of electron channels. Upon annealing at $400^{\circ}C$ in Ar atmosphere, conductance increases more than 500 %, and the threshold voltage shifts toward further positive gate voltages. The results of this experiment support possible application of single-walled carbon nanotubes for humidity sensing material.

• The Korean Journal of Physiology and Pharmacology
• /
• 제4권1호
• /
• pp.9-14
• /
• 2000

$K^+$ currents play multiple roles in the excitability of dorsal root ganglion (DRG) neurons. Influences on these currents change the shape of the action potential, its firing threshold and the resting membrane potential. In this study, whole cell configuration of patch clamp technique had been applied to record the blocking effect of capsaicin, a lipophilic alkaloid, on the delayed rectifier $K^+$ current in cultured small diameter DRG neurons of adult rat. Capsaicin reduced the amplitude of $K^+$ current in dose dependent manner, and the concentration-dependence curve was well described by the Hill equation with $K_D$ value of $19.1{\mu}M.$ The blocking effect of capsaicin was reversible. Capsaicin $(10 {\mu}M)$ shifted the steady-state inactivation curve in the hyperpolarizing direction by about 15 mV and increased the rate of inactivation. The voltage dependence of activation was not affected by capsaicin. These multiple effects of capsaicin may suggest that capsaicin bind to the region of $K^+$ channel, participating in inactivation process.

• 전력전자학회논문지
• /
• 제19권4호
• /
• pp.376-382
• /
• 2014

This paper proposes the pulse width modulation (PWM) control strategy for low-speed operation in the three-level neutral-point-clamped (NPC) inverters based on the bootstrap gate drive circuit. As a purpose of the cost reduction, several papers have paid attention to the bootstrap circuit applied to the three-level NPC inverter. However, the bootstrap gate driver IC cannot generate the gate signal to the IGBT for low-speed operation, because the bootstrap capacitor voltage decreases under the threshold level. For low-speed operation, the dipolar and partial-dipolar modulations can be the effective solution. However, these modulations have drawbacks in terms of the switching loss and THD. Therefore, this paper proposes the PWM control strategy to operate the inverter at low-speed and to minimize the switching loss and harmonics. The experimental results are presented to verify the validity on the proposed method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.109-110
• /
• 2007

Plasma etching process에서 magnetic field 영향에 관한 연구이다. High level dry etch process를 위해서는 high density plasma(HDP)가 요구된다. HDP를 위해서 MERIE(Magnetical enhancement reactive ion etcher) type의 설비가 사용되며 process chamber side에 4개의 magnetic coil을 사용한다. 이런 magnetic factor가 특히 wafer edge부문에 plasma charging에 의한 damage를 유발시키고 이로 인해 device Vth(Threshold voltage)가 shift 되면서 제품의 program 동작 문제의 원인이 되는 것을 발견하였다. 이번 연구에서 magnetic field와 관련된 plasma charge damage를 확인하고 damage free한 공정조건을 확보하게 되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1271-1272
• /
• 2007

Experimental results regarding to the structural properties of carbon nanotubes (CNTs) and the field-emission characteristics of CNT-coated tungsten (W) tips are presented. CNTs are successfully grown on conical-type W-tips by inductively coupled plasma-chemical vapor deposition (ICP-CVD) with or without inserting a TiN-buffer layer prior to the formation of Ni catalysts. For all the CNTs grown, their nanostructures, morphologies, and crystalline structures are analyzed by FESEM, HRTEM, and Raman spectroscopy. Furthermore, the emission properties of CNT-based field-emitters are characterized to estimate the maximum current density and the threshold voltage. The results obtained in this study indicate that the emission current level of the CNT-emitter without using a TiN buffer is desirable for the application of micro-focused x-ray systems.