• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.543-549
• /
• 2013

Motion artifacts of central and autonomic nervous system signals degrades the performance of the bio-signal based human factor analysis. Firstly, we propose a defining method of motion artifact section by analyzing successive image frames. Motion artifact section is defined when the amount of motion is greater than the pre-defined threshold. In here, the amount of motion is estimated by first derivation of image frames at temporal domain. Secondly, we propose another defining method of motion artifact section through designing 2D Gaussian probability density function model by analyzing feature vectors of one cycle of signal such as length and amplitude. The defined motion artifact sections are interpolated on the basis of 1D Gaussian function. At result of applying the method into photoplethysmography signal, we confirmed that the calculated heartbeat rate from the restored photoplethysmography came up to the one from electrocardiography. Also, we found that the video based method generated relatively more false acceptance of motion artifact section and the probability density function based method generated relatively more false rejection of motion artifact section.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.4 s.346
• /
• pp.23-30
• /
• 2006

This paper describes the short-channel effect(SCE), corner effect of nano-scale MuGFETs(Multiple-Gate FETs) by three-dimensional simulation. We can extract the equivalent gate number of MuGFETs(Double-gate=2, Tri-gate=3, Pi-gate=3.14, Omega-gate=3.4, GAA=4) by threshold voltage model. Using the extracted gate number(n) we can calculate the natural length for each gate devices. We established a scaling theory for MuGFETs, which gives a optimization to avoid short channel effects for the device structure(silicon thickness, gate oxide thickness). It is observed that the comer effects decrease with the reduction of doping concentration and gate oxide thickness when the radius of curvature is larger than 17 % of the channel width.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.4
• /
• pp.31-36
• /
• 2009

In this paper, the laser cutting characteristics of the flexible PCB using high power Nd:YAG UV laser were investigated. A specific FPCB model was selected for the experiment. Test sheets were made, which had equal materials and layer structure to those of the outline (OL) region and the contact pad (CP) region in the FPCB. The experiment is made up of two stages. In the first stage of the experiment, the laser cutting fluence was found, which is the threshold fluence to cut the test sheets completely. The laser cutting fluence of the OL sheet is $1781.26{\sim}1970.16\;J/cm^2$ and that of the CP sheet is $2109.34{\sim}2134.34\;J/cm^2$. In the second stage, cutting performance and its qualities were analyzed by the experiment. The laser cutting performance remained almost unchanged for all laser and process parameter sets. The average cutting width (top side/bottom side) of the OL sheet was $40.45\;{\mu}m/11.52\;{\mu}m$ and that of the CP sheet was $22.14\;{\mu}m/10.93\;{\mu}m$. However, the laser cutting qualities were different according to the parameters. The adjacent region of the cutting line on the OL sheet was carbonized as the beam speed was low and the overlap coefficient was high. The surface quality around the cutting line of the CP sheet was about the same. Carbonization and debris occurred on the surface of the cutting line. As a result of the experiment, the cutting qualities were better as the overlap coefficient was made low and beam speed high. Therefore, the overlap coefficient 2 or 3 is proper for the FPCB laser cutting.

• Korean journal of applied entomology
• /
• v.38 no.1
• /
• pp.29-33
• /
• 1999

Orius strgicollis Poppius is an endemic natural enemy of thrips recently found. To estimatethe optimum temperature for rearing in laboratory, development and oviposition of 0. strigicollis wasstudied at 15, 20, 25 and 30$^{\circ}$C with a 16L : 8D photoperiod and 60-80% RH. Cotton aphid, Aphisgossipyii, was supplied as prey. Total number of eggs laid per female ranged from 39.1 to 68.5 with thehighest at 25$^{\circ}$C. Adult longevity decreased as temperature increased, and the reverse was true for eggsurvivorship. Survivorship of larvae was 26.7,43.3, 76.7 and 46.7% at 15, 20, 25 and 30$^{\circ}$C, respectively.Duration of eggs and larvae at tested temperatures ranged from 3.4 days to 18.9 days and from 9.4 days to45.6 days, respectively. A linear regression model could describe development of the predator as afunction of temperature (R2=0.949-0.997). The lower developmental threshold temperatures for egg,larvae, and total immature stage were estimated to be 12.4, 11.4, and 11.6"C, respectively.6"C, respectively.vely.

• Journal of Internet Computing and Services
• /
• v.14 no.4
• /
• pp.13-24
• /
• 2013

IEEE 802.15.4 network and WiFi network are installed to overlap each other and configured to use adjacent frequency bands in which case the communication service required by applications can not be guaranteed because of randomly increased frame transmission delay and frequent frame transmission failures at nodes in IEEE 802.15.4 network. In this paper, transmission delay model at IEEE 802.15.4 nodes and an experimental system to evaluate the interference from WiFi traffic are described, then elements for the evaluation of interference are measured with the analysis of their characteristics. A sequential method of using medium access layer and physical layer elements of IEEE 802.15.4 protocols is proposed to decide interference from WiFi network. With the proposed method, if an evaluation function having frame transmission failures and transmission delay as variables returns a value greater than a threshold, intensive measurements of wireless channel power are carried out subsequently and the final decision of interference is made by the calculated average channel power. Experimental results of the method show that the decision time is reduced with increased frequency of decision in comparison to an other similar method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.764-769
• /
• 2004

The DC Motor in a vehicle may cause noise and vibration because of high speed revolution, which can make a driver feel uncomfortable. There have been various studies attempting to solve these problems, focusing mostly on the causes of and ways to reduce noise and vibration. It is suggested that the noise in a DC Motor may be primarily due to interaction between a brush and a commutator. Brush noise, the most common noise in a DC Motor, results from a brush bounced from the surface of the commutator, fluctuation of the friction between the brush and the commutator, and the impact on the brush when passing over slots of the commutator. Based on the noise test, one of the most important design parameters was shown to be the roundness of the commutator. As the DC motor is used, the roundness of the commutator gets bigger with subsequent increase of the level of brush noise and vibration. There must be a threshold in order to prevent the brush noise from getting worse. Using the method of CAE is more efficient than the real test for purposes of looking for various design parameters to maintain the roundness of the commutator. In this study, the design process to reduce the brush noise is presented with the use of a computer model. The design parameters to reduce the brush noise and vibration are proposed by using FEM. The design parameters are used to reduce the noise and vibration of a DC motor and it is verified with the test results on a fan DC motor in a vehicle. This method may be applicable to various DC motors.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.32 no.1
• /
• pp.35-42
• /
• 2018

TRPA1 and TRPV1 are members of the TRP superfamily of structurally related, nonselective cation channels. TRPA1 and TRPV1 are often co-expressed in sensory neurons and play an important role in mechanical hyperalgesia and allodynia during neuropathic pain. Scutellariae Radix was reported to possess anti-inflammation properties and similar patterns of therapeutic action against different diseases. also Baicalin(a known principal constituent of Scutellaria Radix) was shown to down-regulate the mRNA expression levels of TRPV1. In this study, we observed the effects of Scutellariae Radix extract(SRE) in neuropathic pain induced SD rats via modulation of TRPV1 and TRPA1. Oral administration of a Scutellaria Radix extract(in doses of 300mg/kg, SRE(300)) showed a meaningful increase in the withdrawal threshold of mechanical allodynia and showed a meaningful decrease in the expression of c-fos compared to the control group. SRE(100) and SRE(300) showed a meaningful decrease in the expression of TRPV1 level compared to the control group. These results suggest that Scutellariae Radix extract could decrease mechanical allodynia by down-regulate the TRPV1 on the model of neuropathic pain.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.22-28
• /
• 2009

As multiprocessors have been widely adopted in embedded systems, task computation energy consumption should be minimized with several low power techniques supported by the multiprocessors. This paper proposes an energy-aware task scheduling algorithm that adopts both dynamic voltage scaling and power shutdown in multiprocessor environments. Considering the timing and energy overhead of power shutdown, the proposed algorithm performs an iterative task assignment and task ordering for multiprocessor systems. In this case, the iterative priority-based task scheduling is adopted to obtain the best solution with the minimized total energy consumption. Total energy consumption is calculated by considering a linear programming model and threshold time of power shutdown. By analyzing experimental results for standard task graphs based on real applications, the resource and timing limitations were analyzed to maximize energy savings. Considering the experimental results, the proposed energy-aware task scheduling provided meaningful performance enhancements over the existing priority-based task scheduling approaches.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.7
• /
• pp.3211-3217
• /
• 2014

Background: The current study investigated the effects of Piper longumine on radio-sensitization of human breast cancer MDA-MB-231 cells and underlying mechanisms. Materials and Methods: Human breast cancer MDA-MB-231 cells were cultured in vitro and those in logarithmic growth phase were selected for experiments divided into four groups: control, X-ray exposed, Piper longumine, and Piper longumine combined with X-rays. Conogenic assays were performed to determine the radio-sensitizing effects. Cell survival curves were fitted by single-hit multi-target model and then the survival fraction (SF), average lethal dose ($D_0$), quasi-threshold dose ($D_q$) and sensitive enhancement ratio (SER) were calculated. Cell apoptosis was analyzed by flow cytometry (FCM). Western blot assays were employed for expression of apoptosis-related proteins (Bc1-2 and Bax) after treatment with Piper longumine and/or X-ray radiation. The intracellular reactive oxygen species (ROS) level was detected by FCM with a DCFH-DA probe. Results: The cloning formation capacity was decreased in the group of piperlongumine plus radiation, which displayed the values of SF2, D0, Dq significantly lower than those of radiation alone group and the sensitive enhancement ratio (SER) of D0 was1.22 and 1.29, respectively. The cell apoptosis rate was increased by the combination treatment of Piper longumine and radiation. Piper longumine increased the radiation-induced intracellular levels of ROS. Compared with the control group and individual group, the combination group demonstrated significantly decreased expression of Bcl-2 with increased Bax. Conclusions: Piper longumine at a non-cytotoxic concentration can enhance the radio-sensitivity of MDA-MB-231cells, which may be related to its regulation of apoptosis-related protein expression and the increase of intracellular ROS level, thus increasing radiation-induced apoptosis.

• Journal of Korean Neurosurgical Society
• /
• v.50 no.5
• /
• pp.420-425
• /
• 2011

Objective : Excitatory amino acids play important roles in the development of secondary pathology following spinal cord injury (SCI). This study was designed to evaluate morphological changes in the dorsal horn of the spinal cord and assess profiles of pain behaviors following intraspinal injection of N-methyl-D-aspartate (NMDA) or quisqualate (QUIS) in rats. Methods : Forty male Sprague-Dawley rats were randomized into three groups : a sham, and two experimental groups receiving injections of 125 mM NMDA or QUIS into their spinal dorsal horn. Following injection, hypersensitivity to cold and mechanical stimuli, and excessive grooming behaviors were assessed serially for four weeks. At the end of survival periods, morphological changes in the spinal cord were evaluated. Results : Cold allodynia was developed in both the NMDA and QUIS groups, which was significantly higher in the QUIS group than in the NMDA group. The mechanical threshold for the ipsilateral hind paw in both QUIS and NMDA groups was significantly lower than that in the control group. The number of groomers was significantly higher in the NMDA group than in the QUIS group. The size of the neck region of the spinal dorsal horn, but not the superficial layer, was significantly smaller in the NMDA and QUIS groups than in the control group. Conclusion : Intraspinal injection of NMDA or QUIS can be used as an excitotoxic model of SCI for further research on spinal neuropathic pain.