• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.2
• /
• pp.1-15
• /
• 2015

Urban flooding threatens human beings and facilities with chemical and physical hazards since the beginning of human civilization. Recent studies have emphasized the integration of data and models for effective urban flood inundation modeling. However, the model set-up process is tend to be time consuming and to require a high level of data processing skill. Furthermore, in spite of the use of high resolution grid data, inundation depth and velocity are varied with building treatment methods in 2-D inundation model, because undesirable grids are generated and resulted in the reliability decline of the simulation results. Thus, it requires building generalization process or enhancing building orthogonality to minimize the distortion of building before converting building footprint into grid data. This study aims to develop building generalization method for 2-dimensional inundation analysis to enhance the model reliability, and to investigate the effect of building generalization method on urban inundation in terms of geographical engineering and hydraulic engineering. As a result to improve the reliability of 2-dimensional inundation analysis, the building generalization method developed in this study should be adapted using Digital Building Model(DBM) before model implementation in urban area. The proposed building generalization sequence was aggregation-simplification, and the threshold of the each method should be determined by considering spatial characteristics, which should not exceed the summation of building gap average and standard deviation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1036-1039
• /
• 2005

하상유지시설의 하류에 설치되는 바닥보호공은 국내의 경우 일반적으로 사석(riprap)이나 돌망태(gabion mattress) 등을 이용하여 시공되고 있으며, 바닥보호공에 사용되는 재료는 유속에 따라 적절한 입경의 재료를 결정하여 사용하게 된다. 1970년대 중반부터 적절한 하상보호공 재료를 결정하기 위한 연구는 사석, 돌망태, 콘크리트 보호 블록 등에 대하여 순차적으로 이루어져 왔다, 초기 연구는 주로 사석에 대해서 이루어졌으며, 중량과 유속 관계를 이용하여 사석 입경 결정 공식을 제안하였으며, 점차 수심 및 하상 경사, 난류 강도 등을 고려하여 재료 입경 결정 공식을 정밀화시켜왔다. 공식에 난류 강도를 고려하기 시작하면서, 단순한 하상보호공 재료를 결정하기 위해서 제안되었던 공식들은 하천 구조물 하류에 설치되는 바닥보호공으로 관심의 대상이 옮겨가기 시작하였다. 기존의 공식들이 일반적인 평탄한 하상보호공으로부터 구조물 하류의 바닥보호공 까지 그 적용이 확장되었던 반면에, Escarameia와 May는 연구의 대상을 수리구조물 하류의 강한 난류 흐름이 발생하는 구간으로 범위를 한정하여 연구를 진행하였으며, Izbash 형태의 식을 기초로 하여, 난류 강도가 주요 변수가 되는 입경 결정 공식을 제안하였다. 본 연구에서는 Escarameia와 May의 연구 결과를 기초로 하여, 국내 하상유지시설 하류에 설치되는 사석 바닥보호공 재료의 입경을 결정하기 위한 실험을 수행하였다. 하천설계기준을 만족하는 실험용 보를 설치한 후 유량 및 실험에 사용된 사석의 입경을 변화시키면서, 유속을 측정하여, 입경별 한계 유속(threshold velocity)의 상관관계를 분석하였다. 실험 결과, Escarameia와 May가 제안한 공식을 더 확장하여 적용할 수 있는 실험 공식으로 개선하였으며 다양한 조건에 대한 실험을 수행하여 보다 정밀한 공식으로 개선할 수 있었다.$10,924m^3/s$ 및 $10,075m^3/s$로서 실험 I의 $2,757m^3/s$에 비해 통수능이 많이 개선되었음을 알 수 있다.함을 알 수 있다. 상수관로 설계 기준에서는 관로내 수압을 $1.5\~4.0kg/cm^2$으로 나타내고 있는데 $6kg/cm^2$보다 과수압을 나타내는 경우가 $100\%$로 밸브를 개방하였을 때보다 $60\%,\;80\%$ 개방하였을 때가 더 빈번히 발생하고 있으므로 대상지역의 밸브 개폐는 $100\%$ 개방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히 교사들이 중요하게 인식하는 해방적 행동에 대한 목표를 강조하여 적용할 필요가 있음을 시사하고 있다.교하여 유의한 차이가 관찰되지 않았다. 또한 HSP 환자군에서도

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.6
• /
• pp.59-64
• /
• 2010

Building a firebreak against surface forest fire is a typical indirect suppression method that stops spread of flame by removing surface fuel, such as fallen leaves and bushes. In the sense of fire dynamic, building a firebreak is to set a section which will block thermal energy from igniting on virgin fuel. This study suggests and evaluates a calculation method for width of firebreak against surface fire for variant wind and slope conditions by applying the Point Source Model (PSM) to fallen leaves of Pinus densiflora. Width of firebreak was measured based on the distance the threshold radiant heat igniting Pinus densiflora fallen leaves at the heat flux of $4.9\;kW/m^2$ reaches. As a result, at the wind velocity of 0~5 m/s and on the slope of $0{\sim}50^{\circ}$, the appropriate width of a firebreak was 0.35~0.65 m for the mean flame height and 0.75~1.05 m for the maximum flame height. Accordingly, considering the factor of safety, the most appropriate width of a firebreak is 1.05 m based on the maximum flame height. Additional comparative analyses through experiments and field surveys are deemed necessary to determine appropriate widths of firebreak for different types of surface fuel.

• Journal of Environmental Science International
• /
• v.19 no.11
• /
• pp.1423-1436
• /
• 2010

The effects of meteorological and reclaiming conditions on the reduction of suspended particles are investigated using a computational fluid dynamics (CFD) model with the k-$\varepsilon$ turbulence closure scheme based on the renormalization group (RNG) theory. Twelve numerical experiments with different meteorological and reclaiming conditions are performed. For identifying the meteorological characteristics of the target area and providing the inflow conditions of the CFD model, the observed data from the automatic weather station (AWS) near the target area is analyzed. Complicated flow patterns such as flow distortion, horse-shoe vortex, recirculation zone, and channeling flow appeared due to the topography and buildings in the domain. Specially, the flow characteristics around the reclamation area are affected by the reclaiming height, reclaiming size and windbreak height. Reclaiming height affected the wind speed above the reclaiming area. Windbreak induces more complicated flow patterns around the reclaiming area as well as within the reclaiming area. In front of the windbreak, flow is distorted as it impinges on the windbreak. As a result, upward flow is generated there. Behind the windbreak, a secondary circulation, so called, a recirculation zone is generated and flow is reattached at the end of the recirculation zone (reattachment point). At the lower part of the recirculation zone, there is a reverse flow toward the windbreak. Flow passing to the reattachment point starts to be recovered. Total amounts of suspended particles are calculated using the frictional and threshold frictional velocities, erosion potential function, and the number of surface disturbance. In the case of a 10 m-reclaiming and northerly wind, the amount of suspended particles is largest. In the presence of 5 m windbreak, the friction velocity above the reclaiming area is largely reduced. As a result, the total amount of the suspended particles largely decreases, compared to the case with the same reclaiming and meteorological conditions except for the windbreak The calculated suspended particle amounts are used as the emission rate of the dispersion model simulations and the dispersion characteristics of the suspended particles are analyzed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.4
• /
• pp.679-700
• /
• 1996

Inferior alveolar nerve dysfunction may be the result of trauma, disease, or iatrogenic injury. Inferior alveolar nerve injury is inherent risk in endodontic therapy, orthognathic surgery of the mandible, and extraction of mandibular teeth, particularly the third molars. The sensory disturbances of inferior alveolar nerve associated with such injury have been well documented clinical problem that is commonly evaluated by several clinical sensory test including Tinels sign, Von Frey test(static light touch detection), directional discrimination, two-point discrimination, pin pressure nociceptive discrimination, and thermal test. These methods used to detect and assess inferior alveolar nerve injury have been subjective in nature, relying on the cooperation of the patients. In addition, many of these techniques are sensitive to differences in the examiners experience and skill with the particular technique. Data obtained at different times or by different examiners are therefore difficult to compare. Prior experimental studies have used electro diagnostic methods(sensory evoked potential) to objectively evaluate inferior alveolar nerve after nerve injury. This study was designed with inferior alveolar nerve of rabbit. Several types of injury including mind, moderate, severe compression and perforation with 19 gauze, 21 gauze needle and 6mm, 10mm traction were applied for taking the sesory evoked ppterntial. Latency and amplitude of injury rabbit inferior alveolar nerve were investigated with sensory evoked potential using unpaired t-test. The results were as follows : 1. Intensity of threshold (T1) was $128{\pm}16{\mu}A$ : latency, $0.87{\pm}0.07$ microsecond : amplitude, $0.4{\pm}0.1{\mu}V$ : conduction velocity, 23.3 m/s in sensory evoked potential of uninjured rabbit inferior alveolar nerve. 2. Rabbit inferior alveolar nerve consists of type II and III sensory nerve fiber. 3. Latency was increased and amplitude was decreased in compression injury. The more injured, the more changed in latency and amplitude. 4. Findings in perforation injury was similar to compression injury. Waveform for sensory evoked potential improved by increasing postinjured time. 5. Increasing latency was prominent in traction injury rabbit inferior alveolar nerve. 6. In microscopic histopathological findings, significant degeneration and disorganization of the internal architecture were seen in nerve facicle of severe compression and 10mm traction group. From the above findings, electrophysiological assessment(sensory evoked potential) of rabbit injured inferior alveolar nerve is reliable technique in diagnosis and prognosis of nerve injury.

• Tunnel and Underground Space
• /
• v.25 no.1
• /
• pp.56-67
• /
• 2015

In this study, a source locating technique applicable to transversely isotropic media was developed. Wave velocity anisotropy was considered based on the partition approximation method, which simply enabled AE source locating. Sets of P wave arrival time were decided by the two-step AIC algorithm and they were later used to locate the AE sources when having the least error compared with the partitioned elements. In order to validate the technique, pencil lead break test on artificial transversely isotropic mortar specimen was carried out. Defining the absolute error as the distance between the pencil lead break point and the located point, 1.60 mm ~ 14.46 mm of range and 8.57 mm of average were estimated therefore it was regarded as thought to be 'acceptable' considering the size of the specimen and the AE sensors. Comparing each absolute error under different threshold levels, results showed small discrepancies therefore this technique was hardly affected by background noise. Absolute error could be decomposed into each coordinate axis error and through it, effect of AE sensor position could be understood so if optimum sensor position was able to be decided, one could get more precise outcome.

• Journal of Korean Society of Forest Science
• /
• v.77 no.2
• /
• pp.178-185
• /
• 1988

This study is carried out for analyzing the factors causing several disasters occurring around beach area in order to set a plan for an afforestation which will fulfill its function as facilities for prevention of disasters and for relaxation around beach resort at Tong-ri, Pokil-my$\bar{o}$n, Wando-gun. The results are as follows : 1. The main wind direction was summer was SE. 2. The first class in the rate of frequency of the hourly average wind speed and the instantaneous wind speed in summer were 2.1-3.0m/sec (29.2%) and 1.1-2.0m/sec (30.6%) respectively. 3. The particle sizes of the dune sands was a little small (82.5% in 0.125 to 0.25mm, $D_{50}=0.178mm$). 4. The mineral composition and the chemical components were as follows : The main mineral : Quartz The accessary minerals : Calcite, Feldspars(Orthoclase), Sericite. The chemical components : $SiO_2$ ; 75.6%. $Al_2O_3$ ; 8.1%, CaO ; 7.76%, Ign. loss ; 6.8%, MgO ; 0.23%, $K_2O$ ; 0.72%, $Na_2O$ ; 0.41%, $Fe_2O_3$ ; 0.32%. 5. The threshold friction velocity equation for the diameter class of the dune sands was $y=4.191x^{0.221}$. 6. The amount of floating salt was maximum at the point of 65m away from beach line, dropped abruptly at 135m and remained almost same on its way to the inland. The equation of the amount of floating salt was $y=28.181{\times}(-0.369^x)$. 7. The amount of extracted salt(33%) in seawater in summer was the same as the one of the nearest seawater of Korea.

• Journal of Korea Water Resources Association
• /
• v.48 no.5
• /
• pp.393-407
• /
• 2015

This study analyzed the characteristics of orographic effect using radar data for the Chungju dam basin. First, independent rainfall events were selected by applying the IETD (Interevent Time Definition) and rainfall threshold. Among those independent rainfall events, rather strong events were selected to decide the occurrence condition of orographic effect. Also, the average reflectivity was calculated for the entire period and for the period of storm center, and the change in reflectivity was analyzed by comparing the average reflectivity to that in the mountain area. Important rainfall factors were selected and applied to the logistic regression model to decide the occurrence condition of orographic effect. Summarizing the results is as follows. First, evaluation of the radar data along the passing line of a storm showed the increase of radar reflectivity in the mountain area. Second, the result of logistic regression analysis showed that the orographic effect in the Chungju Dam Basin mostly occurred when the rainfall intensity was higher than 4 mm/hr, the storm velocity was lower than 4 km/hr, and the approach angle was $90^{\circ}{\pm}5^{\circ}$.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.5
• /
• pp.316-325
• /
• 2012

In this study, we suggested adequate control technology by analyzing emission process and main chemical of VOC/HAPs generated from four paint factories in Busan area. And we estimated whether Kapok fiber, which is a natural material, can be commercially used for an absorbent by testing adsorption ability. As a result of this sturdy, above 60% of VOC/HAPs was volatilized and dispersed inside the working place without conducting control system of facilities during manufacturing paints. Concentration profile of VOC/HAPs, which is volatile naturally outside the factories, is surveyed above 70% at Toluene, Ethylbenzene, and Xylene. And a result of evaluation of odor attribution level about the component whose Odor Threshold is known, it is estimated that major cause material of A, B, C factories is Toluene and that of D factory is m/p-Xylene. And that result presented design arguments such as facilities specifications, activated carbon filling volume, and replace cycle of activated carbon as control technology. Also, that result presented emission process improvement such as adsorption of central-controlled ventilation device, installation of inlet flenge, and potable cleaning process. The rate of pollutant adsorption of Kapok fiber, which is natural material, is indicated about 91.9%, 66.7%. That result validated the possibility as replacement of activated carbon.

• Clinical and Experimental Reproductive Medicine
• /
• v.38 no.1
• /
• pp.47-52
• /
• 2011

Objective: To determine whether characteristics of sperm motility obtained by computer-assisted sperm analysis (CASA) could predict pregnancy after intrauterine insemination (IUI) in couples with unexplained infertility. Methods: Three hundred eighty-three cycles of intrauterine insemination with superovulation were retrospectively analyzed. Semen analysis was performed with CASA before and after swim-up and the parameters were compared between pregnant and non-pregnant women. Results: The pregnancy rate per cycle was 14.1%. Pregnant and non-pregnant women were comparable in terms of age, infertility duration, the number of dominant follicles. While sperm concentration, motility, and parameters such as average path velocity (VAP) and percentage rapid (RAPID) before semen preparation were significantly different between the pregnancy and non-pregnancy groups, there were no differences in sperm parameters when comparing the two groups after preparation. Using a receiver operating characteristic curve to measure sensitivity and specificity, the optimal threshold value for the predictors of pregnancy was revealed to be a concentration of ${\geq}111{\times}10^6/mL$, a motility of ${\geq}$ 51.4%, and RAPID ${\geq}$ 30.1% before preparation for IUI. Conclusion: Sperm parameters including concentration, motility, and RAPID before sperm preparation could have predictive value for pregnancy outcome after intrauterine insemination with superovulation in couples with unexplained infertility, and would be helpful when counseling patients before they make the decision to proceed with IVF/ICSI-ET.