• Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.125-130
• /
• 2008

Free ammonia ($NH_3$-N) inhibition of nitrite-oxidizing bacteria (NOB) has been widely studied for partial nitrification (or nitrite accumulation) and denitrification via nitrite ($NO_2^-$-N) as a low-cost treatment of ammonium containing wastewater. The literature on $NH_3$-N inhibition of NOB, however, shows disagreement about the threshold $NH_3$-N concentration and its degree of inhibition. In order to clarify the confusion, a simple and cheap respirometric method was devised to investigate the effect of free ammonia inhibition of NOB. Sludge samples from an autotrophic nitrifying reactor were exposed to various $NH_3$-N concentrations to measure the maximum specific nitrite oxidation rate ($\hat{K}_{NO}$) using a respirometer. NOB biomass was estimated from the yield values in the literature. Free ammonia inhibition of nitrite oxidizing bacteria was reversible and the specific nitrite oxidation rate ($K_{NO}$) decreased from 0.141 to 0.116, 0.100, 0.097 and 0.081 mg $NO_2^-$-N/mg NOB h, respectively, as the $NH_3$-N concentration increased from 0.0 to 1.0, 4.1, 9.7 and 22.9 mg/L. A nonlinear regression based on the noncompetitive inhibition mode gave an estimate of the Inhibition concentration ($K_I$) of free ammonia to be 21.3 mg $NH_3$-N/L. Previous studies gave $\hat{K}_{NO}$ of Nitrobacter and Nitrospira as 0.120 and 0.032 mg/mg VSS h. The free ammonia concentration which inhibits Nitrobacter was $30{\sim}50\;mg$ $NH_3$-N/L and Nitrospira was inhibited at $0.04{\sim}0.08\;mg$ $NH_3$-N/L. The results support the fact that Nitrobacter is the dominant NOB in the reactor. The variations in the reported values of free ammonia inhibition may be due to the different species of nitrite oxidizers present in the reactors. The respirometric method provides rapid and reliable analysis of the behavior and community of the nitrite oxidizing bacteria.

• Journal of Broadcast Engineering
• /
• v.12 no.6
• /
• pp.596-610
• /
• 2007

In order to reduce the complexity of SVC encoding, we introduce a fast mode decision method in the enhancement layers of spatial scalability by selectively performing the inter-layer residual prediction of SVC. The Inter-layer residual prediction coding in Scalable Video Coding has a large advantage of enhancing the coding efficiency since it utilizes the correlation between two residuals from a lower spatial layer and its next higher spatial layer. However, this entails the dramatical increase in the complexity of SVC encoders. The proposed method is to analyze the characteristics of integer transform coefficients for the subtracted signal for two residuals from lower and upper spatial layers. Then it selectively performs the inter-layer residual prediction coding and rate-distortion optimizations in the upper spatial enhancement layer if the SAD values of residuals exceed adaptive threshold values. Therefore, by classifying the residuals according to the properties of integer-transform coefficients only with SAD of residuals between two layers, the SVC encoder can perform the inter-layer residual coding selectively, thus significantly reducing the total required encoding time. The proposed method results in reduction of the total encoding time with 51.5% in average while maintaining the RD performance with negligible amounts of quality degradation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1414-1419
• /
• 2015

A method for detecting a skin region on the image is generally used to detect the color information. However, If saturation lowered, skin detection is difficult because hue information of the pixels is lost. So in this paper, we propose a method of correcting color of lower saturation of skin region images by the lighting. Color correction process of this method is saturation image acquisition and low-saturation region classification, segmentation, and the saturation of the split in the low saturation region extraction and color values, the color correction sequence. This method extracts the low saturation regions in the image and extract the color and saturation in the region and the surrounding region to produce a color similar to the original color. Therefore, the method of extracting the low saturation region should be correctly preceding. Because more accurate segmentation in the process of obtaining a low saturation regions, we use a multi-threshold method proposed Otsu in Hue values of the HSV color space, and create a binary image. Our experimental results for 170 portrait images show a possibility that the proposed method could be used efficiently preprocessing of skin color detection method, because the detection result of proposed method is 5.8% higher than not used it.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.2
• /
• pp.7-15
• /
• 2014

This study was conducted to understand the chemical characteristics of groundwater in carbonate areas of Korea. In this study, data on pH, electric conductivity (EC), $Ca^{2+}$, $Mg^{2+}$, $Na^+$, $K^+$, $Cl^-$, $SO_4{^{2-}}$, and $HCO_3{^-}$ were collected from 97 wells which were installed in various carbonate rock regions of Korea. The pH values ranged from 5.7 to 9.9, and the average value was 7.3. The concentration range showed differences between the maximum value of $HCO_3{^-}$ and the medium to minimum values of $Ca^{2+}$, $Mg^{2+}$, $Na^+$, $Cl^-$, $SO_4{^{2-}}$, and $K^+$ in the study area. The average value of EC was $374{\mu}S/cm$, higher than in granite and gneiss areas, where the value is $176{\mu}S/cm$. Most of the groundwater was type $Ca-HCO_3$, and some was type $Mg-HCO_3$. The relationship between $Ca^{2+}$, $Cl^-$, and $HCO_3{^-}$, respectively, and EC showed relatively significant positive correlations compared to the other dissolved components. However, the determination coefficients for $Mg^{2+}$, $Na^+$, $SO_4{^{2-}}$, and $K^+$ were very low less than 0.2. These results indicate that the source of $Ca^{2+}$ and $Mg^{2+}$ is relatively simple (carbonate dissolution) compared to other sources. The sources of $Na^+$, $K^+$, $Cl^-$, $SO_4{^{2-}}$, and $HCO_3{^-}$ might be not only water-rock interactions, but also irrigation return flow, because many groundwater wells had been developed for irrigation purposes. Subsequently, the influence of agriculture on groundwater chemistry was evaluated using a cumulative plot of $SO_4{^{2-}}$. The threshold value of $SO_4{^{2-}}$ calculated from the cumulative frequency curve was 29.2 mg/L. Therefore, 12.4% of all the groundwater wells were affected by agricultural activity.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.3
• /
• pp.219-228
• /
• 2001

Objective : For the purpose of preparing the fundamental data and health promotion and control program on organic solvents in air of manufacturing industry. Methods : The author surveyed number of organic solvent components which was used in working site and also determined the organic solvents concentration in air of 927 manufacturing industries and 1,267 working process with gas chromatography(NIOSH manual) for five years from 1995 to 1999. Results : Mean number of solvents components by type of industry, working process was number of 12. There were exceeded to TLV of 1,2-dichloroethane in textile manufacturing industry N,N-dimethyl furan in tanning and dressing of leather ; luggage, handbags, saddlery, harness and footwear manufacturing industry and chemical and chemical product manufacturing industry by type of industry. There were exceeded to TLV of 1,2-dichloroethane in handwriting and drawing process, cellosolve in adhesive spreading process, N,N-dimethly furan in production of solvent process and adhesion process by working process Total exceeded rate to threshold limit values of organic solvents mixture were 12.9% for EI(Exposure index) and 10.0% for Em(Estimation of mixture) by type of industry, 11.3% for EI and 8.2% for Em by type of working process. The highest exceed rate was 36.7% for EI in tanning and dressing of leather ; luggage handbags, saddlery, harness and footwear manufacturing industry and 29.0% for Em in textile manufacturing industry. The highest exceeded rate was 23.1% for EI and 12.5% for Em in adhesive spreading process by working process. Mean values of total subjects by type of industry and type of working process were $0.7{\pm}1.8$ for EI and $0.7{\pm}1.7$ for Em respectively. Conclusions : As above results, the author suggest that it makes the environmental control program on 1.2-dichloroethane, N,N-dimethyl furan, cellosolve by kind of organic solvent and on textile manufacturing industry, tanning and dressing of leather ; luggage, handbags, saddlery harness and footwear manufacturing industry by type of industry, and on handwriting, drawing process and adhesive spreading process and adhesion process by type of working process.

• Korean Journal of Radiology
• /
• v.19 no.6
• /
• pp.1042-1052
• /
• 2018

Objective: To determine the utility of computed tomography (CT) ventricular volumes and morphometric parameters for deciding the treatment strategy in children with a hypoplastic left ventricle (LV). Materials and Methods: Ninety-four consecutive children were included in this study and divided into small LV single ventricle repair (SVR) (n = 28), small LV biventricular repair (BVR) (n = 6), disease-matched control (n = 19), and control (n = 41) groups. The CT-based indexed LV volumes, LV-to-right-ventricular (LV/RV) volume ratio, left-to-right atrioventricular valve (AVV) area ratio, left-to-right AVV diameter ratio, and LV/RV long dimension ratio were compared between groups. Proportions of preferred SVR in the small LV SVR group suggested by the parameters were evaluated. Results: Indexed LV end-systolic (ES) and end-diastolic (ED) volumes in the small LV SVR group ($6.3{\pm}4.0mL/m^2$ and $14.4{\pm}10.2mL/m^2$, respectively) were significantly smaller than those in the disease-matched control group ($16.0{\pm}4.7mL/m^2$ and $37.7{\pm}12.0mL/m^2$, respectively; p < 0.001) and the control group ($16.0{\pm}5.5mL/m^2$ and $46.3{\pm}10.8mL/m^2$, respectively; p < 0.001). These volumes were $8.3{\pm}2.4mL/m^2$ and $21.4{\pm}5.3mL/m^2$, respectively, in the small LV BVR group. ES and ED indexed LV volumes of < $7mL/m^2$ and < $17mL/m^2$, LV/RV volume ratios of < 0.22 and < 0.25, AVV area ratios of < 0.33 and < 0.24, and AVV diameter ratios of < 0.52 and < 0.46, respectively, enabled the differentiation of a subset of patients in the small LV SVR group from those in the two control groups. One patient in the small LV biventricular group died after BVR, indicating that this patient might not have been a good candidate based on the suggested cut-off values. Conclusion: CT-based ventricular volumes and morphometric parameters can suggest cut-off values for SVR in children with a hypoplastic LV.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.16 no.2
• /
• pp.68-74
• /
• 2018

Purpose: In 2012, a revised guideline for acute acetaminophen overdose was proposed in the UK, recommending that the treatment threshold should be lowered to 100 mcg/ml at 4 hours after ingestion without risk stratification of hepatotoxicity. However, the poison centers in some developing countries do not have laboratory resources to provide serum drug levels in time. The primary aim of the study is to evaluate the cut-off value of reported dose per kilogram to determine when N-acetylcysteine treatment is warranted under the revised guideline. Methods: Data were collected retrospectively from the toxicology registry of an urban emergency medical center between 1st January 2010 and 30th June 2017. Inclusion criteria were single acute overdose of more than 75 mg/kg in 15 hours from ingestion and over 14 years of age. Subgroups were created by 25 mg/kg increments of reported dose, then sensitivity, specificity, positive predictive value and negative predictive value were calculated for the cut-off values of 100 mg/kg, 125 mg/kg, 150 mg/kg and 175 mg/kg for toxic serum level over '100-treatment line'. Results: A total of 99 patients were enrolled in the study; 24 patients showed toxic serum levels (24.2%). Zero of 17 patients with an ingestion dose under 100 mg/kg showed toxic level (0%), and 0 of 15 under 125 mg/kg (0%), 2 of 14 under 150 mg/kg (14.3%), and 4 of 12 under 175 mg/kg (33.3%) had toxic levels. The higher the ingested dose per kilogram of weight, the higher the frequency of the toxic serum concentration on the first test (${\chi}^2$ test for trend, ${\chi}^2=22.66$, p-value<0.001) and the sensitivity of each value was 100%, 100%, 92% and 76%. Conclusion: In acute single acetaminophen intoxication, the ingestion dose of 100 mg/kg of weight will be useful in determining the need for the N-acetylcysteine antidote in the indigent laboratory environment.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.1
• /
• pp.83-97
• /
• 2021

Wireless sensors that make up the Wireless Sensor Network generally have extremely limited power and resources. The wireless sensor enters the sleep state at a certain interval to conserve power. The Sleep deflation attack is a deadly attack that consumes power by preventing wireless sensors from entering the sleep state, but there is no clear countermeasure. Thus, in this paper, using clustering-based binary search tree structure, the Sleep deprivation attack detection model is proposed. The model proposed in this paper utilizes one of the characteristics of both attack sensor nodes and normal sensor nodes which were classified using machine learning. The characteristics used for detection were determined using Long Short-Term Memory, Decision Tree, Support Vector Machine, and K-Nearest Neighbor. Thresholds for judging attack sensor nodes were then learned by applying the SVM. The determined features were used in the proposed algorithm to calculate the values for attack detection, and the threshold for determining the calculated values was derived by applying SVM.Through experiments, the detection model proposed showed a detection rate of 94% when 35% of the total sensor nodes were attack sensor nodes and improvement of up to 26% in power retention.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.10
• /
• pp.1292-1298
• /
• 2023

PAMB 00755^T, a bacterial strain, was isolated from Korean fir leaves. The strain exhibits yellow colonies and consists of Gram-negative, non-motile, short rods or ovoid-shaped cells. It displays optimal growth conditions at 20℃, 0% NaCl, and pH 6.0. Results of 16S rRNA gene-based phylogenetic analyses showed that strain PAMB 00755^T was most closely related to Sphingomonas chungangi MAH-6^T (97.7%) and Sphingomonas polyaromaticivorans B2-7^T (97.4%), and ≤96.5% sequence similarity to other members of the genus Sphingomonas. The values of average nucleotide identity (79.9-81.3%), average amino acid identity (73.3-75.9%), and digital DNA-DNA hybridization (73.3-75.9%) were significantly lower than the threshold values for species boundaries; these overall genome-related indexes (OGRI) analyses indicated that the strain represents a novel species. Genomic analysis revealed that the strain has a 4.4-Mbp genome encoding 4,083 functional genes, while the DNA G+C content of the whole genome is 66.1%. The genome of strain PAMB 00755^T showed a putative carotenoid biosynthetic cluster responsible for its antioxidant activity. The respiratory quinone was identified as ubiquinone 10 (Q-10), while the major fatty acids in the profile were identified as C_18:1ω7c and/or C_18:1ω6c (summed feature 8). The major polar lipids of strain PAMB 00755^T were diphosphatidylglycerol, phosphatidylethanolamine, sphingoglycolipid, and phosphatidylcholine. Based on a comprehensive analysis of genomic, phenotypic, and chemotaxonomic characteristics, we proposed the name Sphingomonas abietis sp. nov. for this novel species, with PAMB 00755^T as the type strain (= KCTC 92781^T = GDMCC 1.3779^T).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.4
• /
• pp.414-427
• /
• 2022

This study aims to analyze the color distribution of maxillary permanent incisors in Korean pediatric patients and determine the effects of age and root developmental stage on tooth color. The L^*a^*b^* values of 404 sound and fully erupted maxillary incisors without dental caries, restorations, trauma history or discoloration from 101 Korean patients between ages 7 and 15, with a mean age 10.0 ± 1.5, were analyzed with a spectrophotometer. CIE L^*a^*b^* values were 84.01, 0.17, and 24.07 in maxillary central incisors, and 82.33, 0.31, and 25.99 in maxillary lateral incisors. L^* values of maxillary central incisors were higher, and b^* values of maxillary central incisors were lower than those of maxillary lateral incisors (p < 0.001). The color differences among the subregions exceeded the clinical perceptibility threshold in both of the maxillary central and lateral incisors. L^* value for children at age 10 and younger was 84.13 in maxillary central incisors and 84.04 in maxillary lateral incisors, and those of older patients were 80.62 and 80.56, respectively. L^* value of maxillary incisors of children at age 10 and younger was significantly higher than that of older patients. The root developmental stage did not affect tooth color. This study suggests that the color differences between maxillary central and lateral incisors and among the subregions of a tooth and the effects of age should be considered for aesthetic restorations of permanent incisors in pediatric patients.