• 전자공학회논문지A
• /
• 제32A권9호
• /
• pp.128-134
• /
• 1995

A fiber-optic temperature sensor utilizing an optical absorption device (InP) was fabricated. The spectrum of transmitted light through an InP device was obtained at the three temperatures(249 K, 369 K). A stabilized LED(light emmiting diode) driver, photoreceiver, and signal proocessing electronics were designed. An intensity referencing technique was adopted in order to minimize the fluctuation of output signal due to external pertubation of the transmitting optical fiber. The optical absorption edge of the InP device moves to longer wavelength at a rate of 0.42 nm / K, and energy gap of InP is 1.35 eV at room temperature. From these results, it is concluded that the InP device has temperature dynamic range of 300 K with LED of center wavelength of 940nm and spectral width of 50nm. The designed fiber-optic temperature sensor system showed good linearity within the temperature range from -30$^{\circ}C$ to + 150$^{\circ}C$.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.76-77
• /
• 2000

Very narrow transmission peaks are generated by the phase-shifted fiber Bragg grating with phase-shift region. The width of the transmission peaks are about ～0.5nm. The characteristics of multi-wavelength source using the phase-shifted fiber Bragg grating are designed and analyzed. The source with two and three transmission peaks is analyzed (omitted)

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.495-499
• /
• 2014

In this paper, a method is proposed for simultaneously measuring the front and back surface profiles of transparent micro-optical components. The proposed method combines a dual-wavelength digital holographic microscope with liquids to record holograms at different wavelengths, and then numerically reconstructs the three-dimensional phase information to image the front and back sides of the sample. A theoretical model is proposed to determine the surface information, and imaging of an achromatic lens is demonstrated experimentally. Unlike conventional interferometry, our proposed method supports nondestructive measurement and direct observation of both front and back profiles of micro-optical elements.

• 천문학회보
• /
• 제39권1호
• /
• pp.60.1-60.1
• /
• 2014

The star ${\zeta}$ Ophiuchi (HD 149757) is one of the brightest massive stars in the northern hemisphere and was widely studied in various wavelength domains. We report the analysis results of far ultraviolet (FUV) observations with other wavelengths for around ${\zeta}$ Ophiuchi. We study the correlation of between multi wavelength observations. We have developed a Monte Carlo code that simulates dust scattering of light including multiple encounters. The code is applied to the present Oph HII region to obtain the geometrical information of dust such as distance and thickness. Also We apply three-dimensional photoionization code to model Wisconsin $H{\alpha}$ Mapper observations of the H II region surrounding the star.

• 한국분무공학회지
• /
• 제9권4호
• /
• pp.1-8
• /
• 2004

Breakup characteristics of liquid sheets formed by the impingement of two water jets, such as a breakup length and a breakup wavelength of sheet, were investigated as increasing the injection velocity up to 30m/s and the ambient gas pressure up to 4.0MPa. While round edged orifices formed a laminar sheet which has no waves on the sheet when the injection velocity is low, sharp edged orifices formed a turbulent sheet which has impact waves irrespective of the injection velocity. Thus we compared the differences of breakup characteristics between them. The results showed that the aerodynamic force significantly affects the breakup of laminar sheet when the gas based Weber number is higher than unity, It was also found that the turbulent sheets have three breakup regimes, i.e. expansion regime, wave breakup regime and catastrophic breakup regime according to the gas based Weber number.

• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.565-570
• /
• 2017

우수한 반사방지막을 얻기 위하여 코팅 층의 구조를 나노입자구조로 만들어 코팅 층에 입사하는 빛을 분산시키거나, 코팅 층의 매질을 다양하게 선택하여 굴절률을 제어하여 반사율을 낮추는 기술이 제안되고 있다. 본 논문에서는 코팅 층의 굴절률 분포를 변화시켜 우수한 반사방지막을 얻는 방법 중 기존논문에서 제시되었던 5차 함수의 굴절률 분포와 제안하는 구배형 굴절률 분포의 반사방지막 특성을 비교하였다. 분석에 사용된 반사방지막 구조는 각각 3, 6, 9층 구조로서 총 두께 180 nm 이고, 입사파의 파장 범위는 300 nm ~ 1100 nm 이다. 각 각 서로 다른 층수에서 반사율을 비교하기 위하여 단층인 경우의 전달매트릭스를 구하고 3, 6, 9층의 구조에서의 반사율을 구하였다. 그 결과 3층의 구조 일 때 제안하는 구배형 굴절률 분포가 약 600 nm ~ 1100 nm 파장 범위에서 5차 함수의 굴절률 분포보다 더 낮은 반사율을 보였다. 향후 이 결과는 가시광선(적색)과 근적외선 영역에 사용되는 광소자 및 광 필터에 응용 가능하리라 판단된다.

• Current Optics and Photonics
• /
• 제3권6호
• /
• pp.541-547
• /
• 2019

A novel photonic crystal fiber (PCF) sensor with three D-shaped holes based on surface plasmon resonance (SPR) is analyzed in this paper. Three D-shaped holes are filled with the analyte, and the gold film is deposited on the side of three planes. The design of D-shaped holes with outward expansion can effectively solve the uniformity problem of metallized nano-coating, it is beneficial to the filling of the analyte and is convenient for real-time measurement of the analyte. Compared with the hexagonal lattice structure, the triangular arrangement of the clad air holes can significantly reduce the transmission loss of light and improve the sensitivity of the sensor. The influences of the air hole diameter, the distance between D-shaped holes and core, and the counterclockwise rotation angle of D-shaped holes on sensing performance are studied. The simulation results show that the wavelength sensitivity of the designed sensor can be as high as 10100 nm/RIU and the resolution can reach 9.9 × 10^-6 RIU.

• 한국광학회지
• /
• 제14권3호
• /
• pp.312-320
• /
• 2003

본 연구에서는 355 nm의 파장을 갖는 Nd:YVO$_4$ 3고주파 DPSS 레이저를 이용하여 폴리머의 3차원 미세형상 가공기술을 개발하였다. UV레이저와 폴리머의 어블레이션에 관한 메커니즘을 설명하였으며 비교적 UV영역에서 파장이 긴 355 nm파장의 영역에서는 광열분해 반응으로 가공되고 이에 따른 폴리머의 광학적 특성을 살펴보았다. 광 흡수율 특성이 우수한 폴리머가 광가공 특성이 좋은 것으로 나타났으나 벤젠구조가 많이 포함되어 있는 폴리이미드의 경우는 광분해후 다시 새로운 화학적 결합이 이루어져 가공부 면이 좋지 않은 면을 보였다. 레이저의 다중 주사방식으로 가공하기위하여 표면의 오염이 적은 폴리카보네이트를 시편으로 사용하여 3차원 적으로 모델링한 직경 1 mm와 500 $\mu\textrm{m}$의 마이크로 팬을 가공하였다. 레이저 발진 효율이 높고 유지비가 적은 355 nm의 DPSSL을 이용한 3차원 가공기술의 개발로 향후 저비용으로 빠른 시간에 미세부품을 개발하는 기술에 기여할 것으로 예상된다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권4호
• /
• pp.509-518
• /
• 2019

This study analyzed the effect of organic solvent extractives on the classification of wood species via near-infrared spectroscopy (NIR). In our previous research, five species of Korean softwood were classified into three groups (i.e., Cryptomeria japonica (cedar)/Chamaecyparis obtuse (cypress), Pinus densiflora (red pine)/Pinus koraiensis (Korean pine), and Larix kaempferi (Larch)) using an NIR-based principal component analysis method. Similar tendencies of extractive distribution were observed among the three groups in that study. Therefore, in this study, we qualitatively analyzed extractives extracted by an organic solvent and analyzed the NIR spectra in terms of the extractives' chemical structure and band assignment to determine their effect in more detail. Cedar/cypress showed a similar NIR spectra patterns by removing the extractives at 1695, 1724, and 2291 nm. D-pinitol, which was detected in cedar, contributed to that wavelength. Red pine/Korean pine showed spectra changes at 1616, 1695, 1681, 1705, 1724, 1731, 1765, 1780, and 2300 nm. Diterpenoids and fatty acid, which have a carboxylic group and an aliphatic double bond, contributed to that wavelength. Larch showed a catechin peak in gas chromatography and mass spectroscopy analysis, but it exhibited very small NIR spectra changes. The aromatic bond in larch seemed to have low sensitivity because of the 1st overtone of the O-H bond of the sawdust cellulose. The three groups sorted via NIR spectroscopy in the previous research showed quite different compositions of extractives, in accordance with the NIR band assignment. Thus, organic solvent extractives are expected to affect the classification of wood species using NIR spectroscopy.

• 한국결정성장학회지
• /
• 제33권5호
• /
• pp.191-195
• /
• 2023

핸드폰 Backcover에 적용한 3층 나노코팅 필름을 롤투롤(roll-to-roll) 연속 공정을 통하여 제조하였다. 세라믹/금속/세라믹 3층 구조의 코팅층을 도입함으로써 금속 고유의 반사 특성을 유지하면서 전기적으로는 절연 특성을 유지하였다. 길이와 폭이 각각 1500 nm, 500 nm인 대면적 PET 필름 위에 도입된 복합 코팅층의 두께는 60 nm 이하를 보였고 모든 영역에서 균일한 두께를 유지하고 있음을 확인하였다. 나노코팅 필름의 파장대(240~1600 nm)에 따른 투과율은 파장이 증가함에 따라 투과율 역시 점차 증가하고 있으며, 적외선 영역인 1,000 nm에서 약 48 %, 가시광선 영역에 해당하는 550 nm에서는 약 35.5 %의 투과율을 보였다. 이는 코팅된 Backcover의 요구 수준(< 40 %)에 부합한다.