• Journal of Microbiology and Biotechnology
• /
• v.19 no.11
• /
• pp.1374-1378
• /
• 2009

Response surface methodology (RSM) examining the effects of five-level-three-factors and their mutual interactions was utilized to optimize the fermentation conditions to enhance capsular polysaccharide (CPS) production of Streptococcus pneumoniae type 3. Twenty experiments conducted in an 8-l lab-scale fermentor were designed to assess fermentation pH, supplemented glucose concentration, and stirring rate. The predicted highest CPS production by the obtained optimization model equation was 256.14 mg/l at optimal conditions [pH 7.5, stirring rate 180 rpm, and supplemented glucose concentration 1% (w/v)]. The validity of the response model was confirmed by the good agreement between the predicted and experimental results. The maximum amount of CPS obtained was $255.03\pm2.23$ mg/l.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.1
• /
• pp.67-71
• /
• 2002

The implications of temperature (25,30 and 35$^{\circ}C$) and relative humidity (60, 70 and 80%) on the pupation patterns were studied in the silkworm, Bombyx mori L. Larvae of two pure silkworm breeds, Pure Mysore (PM) and NB4D2 and their hybrid, PM ${\times}4 NB4D2 were reared under experimental conditions under natural day photoperiodic (LD 12: 12) condition. The three developmental marker events viz., larval ripening, pharate pupal formation and pupal formation occurred at or around the beginning of the photo-phase. The computed of mean vector (equation omitted), based on the circular statistics, also confirmed the above. However, the length of mean vector, r and the mean vector angular variance, s varied according to temperature and humidity conditions imposed; the variations being non-significant. Extreme temperature and humidity conditions, however, resulted in reduction in pupation rate (%) for PM and PM ${\times}4 NB4D2. On the other hand, in NB4D2 pupation percentage reduced below the economic level. The temperature and humidity together seems to exert synergic impact on the pupation rate at least in the silkworm Bombyx mori, L.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.264-269
• /
• 2013

Purpose: This study was carried out to develop a classification index and grade levels to rate agricultural heaters for energy efficiency classification. Methods: The classification index was developed mainly by taking simplicity of calculation and easy access to relevant data into consideration. The grade levels were developed on the basis of a 5-grade classification system in which graded heaters are to be normally distributed over the grades. The value of each grade level were determined in terms of the classification index values calculated using the published performance data of agricultural heaters tested at the FACT in Korea over the past 12 years. Results: The thermal efficiency of agricultural heaters based on the enthalpy method was proposed as a reasonable classification index. The grade levels were proposed in equation form for three types of agricultural heaters: fossil fuel heaters, wood pellet heaters and wood pellet boilers. A reasonable energy efficiency classification of agricultural heaters could be performed using the proposed classification index and grade levels. Conclusions: It is expected that energy saving programs will be extended to agricultural machines in the near future. The classification index and grade levels to rate agricultural heaters for energy efficiency classification were developed and proposed for such near future to come.

• Korean Journal of Optics and Photonics
• /
• v.4 no.1
• /
• pp.101-107
• /
• 1993

We carried out the useful theoretical calculation for the optimum design of a 1.48 ${\mu}m$ diode laser pumped E$r^{3+}$ doped fiber amplifier. The model we established is based on the rate equations of three level laser system and the overlap integral between fundamental mode L$P_{01}$ and E$r^{3+}$ doped area. We determined several fiber parameters (N.A., V value, fiber length, E$r^{3+}$ concentration, cutoff wavelength etc.) for the optimum design of a high optical gain. We found that our theoretical results are very useful to the design of E$r^{3+}$ doped fiber used in EDFA.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.4
• /
• pp.52-61
• /
• 2003

This study was carried out to analyze the effects of stormwater retention and infiltration pond on reduction of flood peak and volume in a experimentally developed ecological pond. The experimental site has 542$m^2$ watershed area, 1,310mm yearly-averaged rainfall. And the area of the retention pond is 60$m^2$, the maximum water depth is 0.5m, the maximum and average storage is 15$m^3$and 9.3$m^3$d. And the area of infiltration pond is 58$m^2$, and the water depth varies 0.2m~0.5m. The monitoring system consists of one rainfall gage, one Parshall flume and acoustic water level gage, two rectangular weirs and acoustic water level gage for discharge gaging, and one data recording unit. Data from ten storm events in total, three storm events in year 2000 and seven storm events in year 2001, were collected. From the data the evaporation rate was achieved with the water balance equation, and the result shows 5.0mm/day in average. The result from the analysis of the effects on reduction of flood peak and volume, is that 14% reduction of flood volume and 15% reduction of flood peak in retention pond and 49% reduction of flood volume in infiltration pond.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.3
• /
• pp.87-93
• /
• 2010

The change of water level in reservoirs is an important factor causing failure of bank slopes, i.e. landslide. The water level of Three Gorges reservoir in China fluctuate between 145 m and 175 m, as a matter of flood control. During its normal operational state, the rate of water level fluctuation is supposed to range from 0.67 m/d to 3.0 m/d. Majiagou slope is located on the left bank of Zhaxi River, 2.1 km up from the outlet. Zhaxi River is a tributary of the Yangtze River within the Three Gorges area, of which the water level changes with the reservoir. At the back of Majiagou slope, a 20 m long and 3~10 cm wide fissure developed just after the reservoir water level rose from 95 m to 135 m in 2003. This big fissure was a full suggestion of potential failure of this slope. In this study, the pore water pressure files obtained from seepage analysis were used to evaluate the change in factor of safety (FS) with reservoir water level. Slope stability analyses then were carried out, with fully specified slip surface and limit equilibrium method. In the limit equilibrium analysis, the contribution of negative pore water pressure to shear strength was considered by the use of Fredlund's shear strength equation for unsaturated soils. On the base of the analyses, the change of FS with reservoir water level was interpreted in detail. It was found that FS against bank slopes decreases with the rise of the reservoir water level and increases with the drawdown of the reservoir water level. The most dangerous state was when the reservoir water level stays at the highest for a long time.

• Journal of Korean Society of Transportation
• /
• v.31 no.1
• /
• pp.47-56
• /
• 2013

The present study proposed a methodology to analyze the networking efficiency of arterial road networks. The methodology was motivated to design three-dimensional networks and to analyze the networking ability quantitatively, which is a novel approach compared to existing methods depending on the two-dimensional network definition and the qualitative analysis for improving arterial road networks. The method considered the interdependence between high-level freeways and low-level highways, the ITS-based information for traffic and road conditions, and the physical networking. These three factors were quantified by a networking index (NI), and the networking efficiency was measured by a networking rate (NR). The present study proved that the networking efficiency (NR) was influenced by travel information sharing (i.e., ITS) and physical factors. This supports the fact that the integrated improvements of physical and ITS factors are necessary for an arterial road. The proposed method was applied for an actual arterial road network. It was found that the nation-wide NR was higher than that for the metropolitan area, which might be due to the difficulty in switching between high- and low-level networks and the lack of ITS functions in the metropolitan area.

• Steel and Composite Structures
• /
• v.48 no.1
• /
• pp.1-17
• /
• 2023

The main goal of this paper is to study vibration of damaged core laminated sectorial plates with Functionally graded (FG) face sheets based on three-dimensional theory of elasticity. The structures are made of a damaged isotropic core and two external face sheets. These skins are strengthened at the nanoscale level by randomly oriented Carbon nanotubes (CNTs) and are reinforced at the microscale stage by oriented straight fibers. These reinforcing phases are included in a polymer matrix and a three-phase approach based on the Eshelby-Mori-Tanaka scheme and on the Halpin-Tsai approach, which is developed to compute the overall mechanical properties of the composite material. Three complicated equations of motion for the sectorial plates under consideration are semi-analytically solved by using 2-D differential quadrature method. Using the 2-D differential quadrature method in the r- and z-directions, allows one to deal with sandwich annular sector plate with arbitrary thickness distribution of material properties and also to implement the effects of different boundary conditions of the structure efficiently and in an exact manner. The fast rate of convergence and accuracy of the method are investigated through the different solved examples. The sandwich annular sector plate is assumed to be simply supported in the radial edges while any arbitrary boundary conditions are applied to the other two circular edges including simply supported, clamped and free. Several parametric analyses are carried out to investigate the mechanical behavior of these multi-layered structures depending on the damage features, through-the-thickness distribution and boundary conditions.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.11 no.1
• /
• pp.27-34
• /
• 1974

This study is aimed at a validation of the vigilance simulation model which was proposed earlier (2). The model estimates a perceived danger value, an alertness level and the probability of detection at a given elapsed time of vigilance. Twenty-nine male and seven female subjects were given a simple task. They were asked to detect a number(four numbers out of six digits in the telephone directory which have the probability of occurrence in the range of 0.0010-0.0018) in six different experimental conditions, for periods of two to three hours. Analysis of the experiments showed that although the mean detection rate varied slightly in two hours, the within-subject variance and the number of cyclic performance fluctuations increased significantly. A primal factor that affects the performance seems to be the frequency of target occurrence. By curve fitting, the relation between the probability of detection and the percentages of danger event occurrence was derived; $y=0.50(1-{\varepsilon}^{-50x^2})+0.39$. Assuming the equation represents the normal detection rate(100% performance), the Relative Vigilance Performance Rating was calculated. This rating method could be a useful criterion in selecting and training of the vigilance personnel. The results show that the simulation model is a good estimator of human a performance when the probability of danger occurrence is greater than 0.0015; it gives a good reference for improving the vigilance system. Suggestions are made that (1) the validity of proposed functional equations over the extended range of danger probability be studied, (2) an analysis of the cyclic fluctuations of the alertness level be accomplished, and (3) the cost functions of detection reliability be included in any future model.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.1-13
• /
• 2008

An efficient segregated algorithm for the coupling of velocity and pressure of incompressible fluid flow, called IDEAL Inner Doubly-Iterative Efficient Algorithm for Linked-Equations), has been proposed by the present authors. In the algorithm there exist double inner iterative processes for pressure equation at each iteration level, which almost completely overcome two approximations in SIMPLE algorithm. Thus the coupling between velocity and pressure is fully guaranteed, greatly enhancing the convergence rate and stability of solution process. The performance of the IDEAL algorithm for three-dimensional incompressible fluid flow and heat transfer problems is analyzed and a systemic comparison is made between the algorithm and three other most widely-used algorithms (SIMPLER, SIMPLEC and PISO). It is found that the IDEAL algorithm is the most robust and the most efficient one among the four algorithms compared. This new algorithm is used for the velocity prediction of a new interface capturing method. VOSET, also proposed by the present author. It is found that the combination of VOSET and IDEAL can appreciably enhance both the interface capture accuracy and convergence rate of computations.