• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.11-16
• /
• 2003

The 3-level converter/inverter system is very efficient in the ac motor drives of high voltage and high power application. This paper proposed a simple method to diagnose faults using change of current vector pattern in space vector diagram when the faults occurrence in the 3-level inverter and a control method that can protect system from unbalance of the neutral point voltage according to faults. The validity of the proposed method is demonstrated by the simulation results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 추계학술대회 논문집
• /
• pp.131-132
• /
• 2016

3-레벨 중성점 다이오드 클램프(NPC) 컨버터는 high-power medium voltage(MV)에서 많이 응용된다. 하지만 3-레벨 중성점 다이오드 클램프(NPC) 컨버터는 각 스위치 소자에서 손실이 불균형하게 발생하게 되어 스위치 소자 간 성능이 불균형하게 된다. 따라서 본 논문에서는 단상 3-레벨 중성점 다이오드 클램프(NPC) 컨버터의 기존 모델 예측 제어의 스위칭 패턴을 분석 및 스위칭 순환방식을 이용한 효율적인 스위칭 상태를 갖는 모델 예측 제어를 제안한다. 이를 통해 PI 제어기 기반의 펄스 폭 변조 방법과 기존 모델 예측 제어 방법의 손실 비교를 통하여 제안하는 모델 예측 제어 성능을 검증한다.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.432-444
• /
• 2018

This paper presents a capacitor voltage balancing topology using a three-level boost converter (TLBC) for a neutral point clamped (NPC) three-level inverter fed surface permanent magnet synchronous motor drive (SPMSM). It enhanced the performance of the drive in terms of its voltage THD and torque pulsation. The main attracting feature of the proposed control is the boosting of the input voltage and at the same time the balancing of the capacitor voltages. This control also reduces the computational complexity. For the purpose of close loop vector control, a software based cost effective resolver to digital converter RDC-less estimation is implemented to calculate the speed and position. The proposed drive is simulated in the MATLAB/SIMULINK environment and an experimental investigation using dSPACE DS1104 validates the proposed drive system at different operating condition.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1415-1425
• /
• 2016

This paper presents a new approach for fault diagnosis in three-level neutral point clamped inverters. The proposed method is based on the average values of the positive and negative parts of normalized output currents. This method is capable of detecting and locating multiple open-circuit faults in the controlled power switches of converters in half of a fundamental period of those currents. The implementation of this diagnostic approach only requires two output currents of the inverter. Therefore, no additional sensors are needed other than the ones already used by the control system of a drive based on this type of converter. Moreover, through the normalization of currents, the diagnosis is independent of the load level of the converter. The performance and effectiveness of the proposed diagnostic technique are validated by experimental results obtained under steady-state and transient conditions.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.86-88
• /
• 2018

The three level(3L) neutral point clamped (NPC) voltage source converter (VSC) topology is widely used for grid interface in high power wind energy due to its superior performance as compared to the two level(2L) VS. However, one of the major drawbacks of this topology is the unequal dispersion of loss and therefore the junction temperature among the power devices. The 3L ANPC topology derived from the NPC topology was proposed to resolve this drawback of unequal loss profile of 3L NPC. The 3L ANPC can work under various switching strategies. In this paper a comparative study of the various switching strategies of 3L ANPC using the recently developed 10kV IGCTs which has the capability to raise the current and voltage rating of the wind turbines is carried out. The comparison is performed using ABB make 10kV IGCT 5SHY17L9000 and PLECs simulations.

• 전력전자학회논문지
• /
• 제24권6호
• /
• pp.419-427
• /
• 2019

Several multilevel converter topologies have been proposed and compared. The three-level (3L) neutral-point-clamped (NPC) topology is promising and widely accepted. However, this topology suffers from uneven loss distribution among switches due to its fixed switching strategy. The 3L active NPC (ANPC) topology, which exhibits improved loss distribution profile, was proposed to address this disadvantage. The 3L T-NPC topology, a hybrid configuration of 2L and 3L NPC topologies, was introduced to address not only the loss distribution problem but also the reduction in the number of switches. In the present research, the application of these three topologies in PMSG-based medium-voltage wind turbines was investigated. The power devices considered were 10 kV IGCTs. Performance was evaluated in terms of a power loss of 10 kV IGCT for each NPC topology, which is a crucial indicator of thermal behavior, reliability, cost, and lifetime of any converter. The comparison was performed using ABB make 10 kV IGCT 5SHY17L9000 and the simulation tool PLECS.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.315-316
• /
• 2012

Three-level neutral point clamping (NPC) converter has been widely applied in high power drive system. And in this paper, a novel method is proposed to realize this algorithm based on FPGA, And the system is consist of two parts, the DSP part and FPGA part, the DSP part includes the control algorithms and the FPGA part works to generate and putout 12 PWM pulses. And the system is tested and verified using both simulation and experimentation.

• 전력전자학회논문지
• /
• 제21권3호
• /
• pp.238-248
• /
• 2016

In this study, an automatic command mode transition strategy of direct power control (DPC) is proposed for permanent magnet synchronous generators (PMSGs) medium-voltage (MV) offshore wind turbines (WTs). Benchmarking against the control methods are performed based on a three-level neutral-point-clamped (NPC) back-to-back type voltage source converter (VSC). The ramping rate criterion of complex power is utilized to select the switching vector in DPC for a three-level NPC converter. With a grid command and an MPPT mode transition strategy, the proposed control method automatically controls the generated output power to satisfy a grid requirement from the hierarchical wind farm controller. The automatic command mode transition strategy of DPC is confirmed through PLECS simulations based on Matlab. The simulation result of the automatic mode transition strategy shows that the proposed control method of VOC and DPC achieves a much shorter transient time of generated output power than the conventional control methods of MPPT and VOC under a step response. The proposed control method helps provide a good dynamic performance for PMSGs MV offshore WTs, thereby generating high quality output power.

• 전력전자학회논문지
• /
• 제15권6호
• /
• pp.451-459
• /
• 2010

본 논문은 대규모 풍력단지를 교류 전력망에 연계하기 위한 3-레벨 PWM 컨버터와 3-레벨 24-펄스 컨버터로 구성된 하이브리드 Back-to-Back 컨버터의 성능을 비교한 결과에 대해 기술하고 있다. 또한 3-레벨 24-펄스 컨버터를 점호각만 제어하는 경우와 영 전압제어를 같이 수행하는 경우 각각이 제어와 고조파레벨에 미치는 영향을 비교 분석하였다. 구체적인 성능비교를 위해 먼저 PSCAD/EMTDC 소프트웨어를 사용하여 시뮬레이션을 실시하고 이를 바탕으로 2 kVA 용량의 하드웨어 축소모형을 제작하고 실험을 실시하였다. 시뮬레이션과 실험을 통해 영전압과 점호각을 동시에 조절하는 방식과 점호각만 제어하는 방식의 성능비교분석을 하였다.