• 한국컴퓨터산업학회논문지
• /
• 제4권4호
• /
• pp.479-490
• /
• 2003

컴포넌트 기반 소프트웨어개발 (CBD: Component Based Development)은 재사용 부품을 기반하여 소프트웨어 개발, 수정, 유지보수를 용이하게 지원한다. 따라서 컴포넌트는 강한 응집력과 양한 결합력으로 개발되어야 한다. 본 논문에서는use case와 클래스를 간에 유사성을 통한 클러스터링 분석에 기반 하여 컴포넌트 식별에 대해 연구한다. 컴포넌트 참조 모델과 프레임워크를 제시하여 사례를 통해 검증한다. 컴포넌트 식별 방법은 추출, 명세 및 아키？쳐를 지원한다. 이들 방법론은 기존의 객체지향 방법론을 참조하며 분석에서 구현까지의 추적성을 지원하며 재사용 컴포넌트의 모듈성 지원을 위해 강한 응집력과 약한 결합력을 반영한다.

• Wind and Structures
• /
• 제10권2호
• /
• pp.135-151
• /
• 2007

This paper examines the extreme gust profiles obtained by conditionally sampling full-scale velocity data obtained in the lower part of the atmospheric boundary layer. It is demonstrated that three different types of behaviour can be observed in the streamwise component of velocity. In all cases the corresponding vertical velocity component illustrates similar behaviour. An idealised horseshoe vortex model and a downburst model are investigated to examine if such structures can explain the behaviour observed. In addition, an empirical model is developed for an isolated gust corresponding to each of the three types of behaviour observed. It is possible that the division of the gust profile into three different types may lead to an improvement in the correlation of extreme gust events with respect to type.

• 대한원격탐사학회지
• /
• 제36권6_1호
• /
• pp.1339-1348
• /
• 2020

식물성플랑크톤은 영양염, 광합성, 탄소순환 등의 측면에서 해양의 생태계를 제어하는데, 해양 환경에 미치는 영향의 정도는 식물성플랑크톤의 크기에 좌우된다. 원격탐사 기술을 기반으로 해양의 식물성플랑크톤 크기 별 생체량을 식별하려는 많은 연구가 있었으며, 그 중 가장 성공적인 접근법 중 하나는 식물성플랑크톤의 크기를 세 등급(micro-plankton;> 20 ㎛, nano-; 2-20 ㎛ 및 pico-; <2 ㎛)으로 구분하여 각 그룹별 엽록소 농도를 추정하는 삼성분 모델(three-component model)이다. 이 연구에서는 동해에서 식물성플랑크톤의 크기 별 생체량 분포를 추정하기 위한 GOCI 자료의 활용 가능성에 대해 검토하였다. 각 크기 별 엽록소 농도(CHL)를 도출하기 위해, 연구지역에서 수 년 동안 수집된 식물성플랑크톤 색소자료를 기반으로 회귀분석을 통해 삼성분 모델의 계수를 산출하였다. 새롭게 산출된 삼성분 모델을 시간 별 GOCI 기반 엽록소 농도 이미지에 적용하여, 전체 엽록소 농도 중 각 식물성플랑크톤 크기 별 생체량이 차지하는 비율을 산출하였다. 또한, 이 결과를 이용하여 동해에서 2013년 여름 대규모 적조가 발생한 시기의 크기 별 엽록소-a 농도 분포를 분석하였다.

• 분석과학
• /
• 제32권4호
• /
• pp.131-138
• /
• 2019

This paper reports results on the physical properties of a powder type of $Al_2O_3:C$ commonly used as a luminescence dosimeter using the LM-OSL technique. On the analysis with the general order kinetics model, the LM-OSL signal measured appeared to be composed of three components (fast, medium, slow) showing the largest area in the medium component. The photoionization cross sections of three components were distributed between $10^{-19}{\sim}10^{-21}cm^2$. The values of the thermal assistance energy were evaluated the largest in slow component and the smallest in fast component, which indicates the electrons trapped in defects attributed to slow component should be the most sensitive to thermal vibration among three components. In illumination to blue light, the fast component showed a rapid linear decay and completely disappeared after light exposure time of about 5 s. The medium component decayed with two exponential elements but the slow component did not observed any noticeable change until light exposure time of 40 s. In a dose response study, all components exhibited a linear behaviour up to approximately 10 Gy.

• 소음진동
• /
• 제6권1호
• /
• pp.97-106
• /
• 1996

This paper presents systematic study of the experimental application of a free-interfaced component mode synthesis method. In the free-interfaced component mode synthesis method, an error the to truncated higher modes and neglected ineria loadings on a component from the connected component is inherent. Also, it is difficult to directly use experimental modal data in a modal synthesis method which links experimental model to finite-element model because of many inconsistencies between experimentally obtained and analytically obtained modal vectors and missing degrees-of-freedom (DOFs) such as rotational DOFs. In order to solve these problems, three methods, the first one based on attaching auxiliary weights to the connection points, the second one utillizing the normalization of experimental modal vector, and the third one generating smoothed and expanded experimental mode shapes, are studied in this paper. Finally, the study is illustrated for a flat-plate structure by using simulated and measured experimental data.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.243-248
• /
• 2007

A three-dimensional (3D) unstructured hydrodynamic solver for transient two-phase flows has been developed. A two-fluid three-field model was adopted for the two-phase flows. The three fields represent a continuous liquid, an entrained liquid, and a vapour field. The hydrodynamic solver is for the 3D component of a nuclear system code and the component-scale analysis tools for transient two-phase flows. The finite volume method and unstructured grid are adopted, which are useful for the flows in a complicated geometry. The semi-implicit ICE (Implicit Continuous-fluid Eulerian) numerical scheme has been adapted to the unstructured non-staggered grid. This paper presents the numerical method and the preliminary results of the calculations. The results show that the numerical scheme is robust and predicts the phase change and the flow transitions due to boiling and flashing problems well.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.885-890
• /
• 2002

As Geographic Information Systems represents three-dimensional topological Information, the systems provide accurate and delicate services for user. In order to execute three-dimensional topological operations, a dimensional transformation and heterogeneous spatial models should be used. However, the existing systems that use the dimensional transformation and the heterogeneous models, are not only difficult to operate the spatial operators, but also happened to support non- interoperability. Therefore, in order to support the spatial operation as well as interoperability between dimensions, we propose three-dimensional spatial operators for the proposed models. We defined the three-dimensional spatial operators prior to designing the proposed model. We also implemented the operators of proposed model and evaluated the implemented model on the component environment. Finally, the proposed model is able to not only support interoperability among systems but also execute spatial queries efficiently on three-dimensional spatial objects.

• 품질경영학회지
• /
• 제17권1호
• /
• pp.1-10
• /
• 1989

In general, the characteristics of components which consist of multi-component system can not be the same. This paper proposes a maintenance model of multi-component system considering the characteristics of each component. In this paper, multi-component system is divided into three components-critical unit, major unit and minor unit, respectively. This paper determines the optimal replacement time of the system which minimizes total maintenance cost, optimal replacement period of major unit and initial stock quantity of minor unit within this optimal replacement time. Numerical examples are shown when the failure times of each unit have gamma distribution.

• 한국전산유체공학회지
• /
• 제16권2호
• /
• pp.30-48
• /
• 2011

A three-dimensional thermal-hydraulic code, CUPID, has been developed for the analysis of transient two-phase flows at component scale. The CUPID code adopts a two-fluid three-field model for two-phase flows. A semi-implicit two-step numerical method was developed to obtain numerical solutions on unstructured grids. This paper presents an overview of the CUPID code development and assessment strategy. The governing equations, physical models, numerical methods and their improvements, and the systematic verification and validation processes are discussed. The code couplings with a system code, MARS, and, a three-dimensional reactor kinetics code, MASTER, are also presented.

• East Asian mathematical journal
• /
• 제9권2호
• /
• pp.333-345
• /
• 1993