• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.308-312
• /
• 2003

The objective of this paper is to investigate the power spectrum of a three-phase and a two-phase RCD (Random Pulse Centered Displacement) PWM scheme. The two-phase or three-phase pulses of RCD-PWM scheme are mutually center-aligned as in SVM(Space Vector Modulation), but the common pulse center is displaced randomly from the middle of the period. To verify the validity of the proposed two-phase RCD-PWM scheme, the power spectra of the output voltage, the d.c link current in the inverter drives and the radiated acoustic noise are experimentally investigated. And, the performance of the proposed two-phase RCD-PWM scheme was compared and discussed with the conventional three-phase RCD-PWM scheme.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1892-1897
• /
• 2010

In three-phase power, when the power is supplied to the single phase load, there is the unbalance of load in the three-phase power. So the scott transformer is used in the power system to supply a single phase load in three-phase power without the unbalance of loads. Especially, the scott transformer is used in the AC substation of electric railroad. Two single phase transformers are combined by T-wiring in the scott transformer. So, two single phase voltage is provided by differing $90^{\circ}$ phase in three-phase power. The selection of related equipment and correction of protective relay are not easy from characteristic of the scott transformer when shunt and ground faults occur. PSIM(Power Electronics Simulator) is optimal simulation software in field of the power electronics and provide the simple and convenient user interface. In this paper, electric model of the scott transformer is suggested and the current of the scott transformer in shunt and ground faults is analyzed. Also, the scott transformer model is demonstrated by using PSIM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.94-97
• /
• 1998

The conceptual design of integrated three phase superconducting fault current limiter (SFCL) is presented. And through simulation of power system where this SFCL is installed, the characteristics of this SFCL is analyzed. It is like three-phase transformer. So it has the same characteristics with inductive single phase SFCL. But it has more merits than single phase SFCL. Differently to single phase SFCL, integrated three phase SFCL induces impedance at all phase by any single phase fault to protect the power system more safely.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권8호
• /
• pp.1137-1146
• /
• 2000

This study was carried out to establish an optimum number of phase feeding regimen which enable to reduce nutrients excretion without affecting growth performance and to investigate the effects of different feeding regimens on growth performance, nutrients excretion and carcass characteristics in finishing pigs. A total of 120 finishing pigs (an average initial body weight of 54.3 kg) were assigned to the feeding trial and 12 pigs were assigned to the metabolic trial. Treatments included one phase (54 to 104 kg), two phase (54 to 80 and 80 to 104 kg), three phase (54 to 70, 70 to 90 and 90 to 104 kg) and four phase (54 to 65, 65 to 80, 80 to 95, 95 to 104 kg) feeding regimens. Experimental diets were formulated to contain 16% crude protein for one phase feeding regimen, 16% and 12% crude protein for two phase feeding regimen, 16%, 14% and 12% crude protein for three phase feeding regimen, and 16%, 14.7%, 13.4% and 12% crude protein for four phase feeding regimen, respectively. Although there were no significant differences in any criteria measured during the entire experimental period, pigs reared in three phase feeding regimen grew slightly faster than those reared in other feeding regimens and showed a tendency to increase ADFI during the whole experimental period. The metabolic trial indicated that there were no significant differences in DM (dry matter), CP (crude protein) and P (phosphorus) digestibilities. However, fecal nutrient excretion except P was significantly influenced by feeding regimens. DM excretion of one phase feeding group was significantly higher than that of three phase feeding group and daily fecal N (nitrogen) excretion of one phase feeding group was higher than that of other phase feeding groups (p<0.05). Three and four phase feeding regimens resulted in 12% lower fecal N and DM excretion than one phase feeding regimen. Blood urea concentrations were lower for pigs reared in two, three and four phase feeding regimens than for those reared in one phase feeding regimen (p<0.05). Three phase feeding regimen for the finishing period showed better carcass grade than one phase feeding regimen, though the difference was not significant. The tenth rib fat thickness of pigs fed on four phase feeding regimen was reduced most and there was a trend that backfat thickness decreased as the number of phases increased. Feed cost per kg weight gain was significantly low in four phase feeding group than one phase feeding group (p<0.05). In summary, it seemed that producers generally oversupply the expensive nutrients for the finishing pigs. High nutrient diets do not always guarantee high growth rate of pigs and cause more unwanted nutrient excretion. It rather seems that meeting nutrient requirements for the each growth phase is more important for the reduction of pollutants and economical pork production.

• 전기학회논문지P
• /
• 제53권2호
• /
• pp.58-64
• /
• 2004

Most of the loads in industrial power distribution systems are balanced and connected to three power systems. However, in the user power distribution systems, most of the loads are single & three phase and unbalanced, generating voltage unbalance. Voltage unbalance is a condition in a polyphase system in which the rms values of the line-to-line voltages or the phase angles between consecutive line-to-line voltages, are not all equal. Slight voltage unbalance generates a disproportionately high current unbalance at the motor stator winding. This paper presents a scheme on operation states of a three-phase induction motor under unbalanced voltages. The three-phase voltages applied to the stator winding of the studied induction motor are controlled by respectively adjusting the magnitude and phase angle of each phase. The voltage unbalanced factor(VUF) of the three-phase source voltages can then be varied to examine the different values of VUF on machine's operation characteristics.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2396-2401
• /
• 2009

The three-phase buck-boost DC-AC inverter generates three alternating output voltages as the differential voltage of three DC-DC individual buck-boost converters. Three converters are driven with three DC-biased and 1200 phase-shifted sinusoidal references. The peak value of the inverter alternating output voltage can be larger or smaller than the value of the direct input voltage. In this paper, a three-phase buck-boost DC-AC inverter is designed and implemented on a prototype with digital controller using a microcontroller.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.119-122
• /
• 2000

This paper presents a new compensation method of series active power filter. The proposed method applied in the three-phase three-wire system can generate harmonic compensation voltage in front of the harmonic source. Futhermore it is also expended to three-phase four-wire system considering zero-sequence voltage. The compensation principle is described in detail. Experimental result show the validity of the proposed method in the three-phase three-wire system

• 전기학회논문지P
• /
• 제66권3호
• /
• pp.99-104
• /
• 2017

The three-phase four-wire power distribution system can be used to supply power to single-phase and three-phase loads at the same time. There are linear loads and nonlinear loads as single-phase loads connected to each phase. The nonlinear load generates a harmonic current during the power energy conversion process. In particular, the single-phase nonlinear load has a higher proportion of generation of the third harmonic current than the harmonics of the other orders. In a three-phase four-wire system, the third harmonic current flows through the neutral wire to the power supply side, affecting the power supply side and the line. Furthermore, the magnitude of the current flowing in the neutral line can be higher than the current flowing in the individual phase. If the neutral current is higher than the phase current, the breaker may be blocked. Therefore, it is necessary to reduce the amount of current flowing in the neutral line by harmonics. There is a method of zigzag connecting a single phase transformer by a method of reducing 3 harmonic current. In this study, the method of reducing the magnitude of the three harmonic currents flowing through the zigzag wire by comparing the polarity and the negative polarity characteristics of the single phase transformer was compared through measurement and simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권3호
• /
• pp.378-386
• /
• 2012

For reduction of the amount of CO2 emitted from ships, power generation characteristics of two power generation systems consisting of a high-efficiency permanent magnet synchronous generator and diode bridge rictifiers are discussed in this paper. One of the discussed systems has three-phase stator windings, and the other has two sets of three-phase (six-phase) stator windings to reduce pulsation in the electromagnetic torque and DC current. Experimental results reveal that the power generation efficiency of the system having six-phase stator windings is higher than that of the system having three-phase stator windings for a light load. The maximum power generation efficiency of the system having six-phase stator windings is almost the same as that of the system having three-phase stator windings. For the electromagnetic torque of the system having six-phase stator windings, the width of pulsation is about one-fifth compared to the system having three-phase stator windings.

• 대한방사선기술학회지:방사선기술과학
• /
• 제3권1호
• /
• pp.81-86
• /
• 1980

To compare three-phase 12-pulse full-wave X-ray generators with single-phase full-wave X-ray generators on their performance of outputs, authors studied the generating X-ray by means of exposure dose and radiographic density. The results were as follows; 1. The exposure doses of three-phase full-wave X-ray generators showed a 30%-60% increase as compared against of single-phase full-wave generators. 2. The transmitted doses of three-phase full-wave generators were more increased than single-phase full-wave X-ray generators. 3. To obtain the same density, 60kVp in three-phase full-wave generators were equivalent to $60{\sim}65kVp$ in single-phase full-wave generators, and 100kVp in those generators were equivalent to $100{\sim}125kVp$ in these generators.