• 패션비즈니스
• /
• 제19권6호
• /
• pp.28-41
• /
• 2015

Properties of textile fabrics influence the appearance, aesthetics, and performance of garment. Drape and related properties of fabrics affect profoundly the static and dynamic appearance during wearer's movement. The three dimensional shape of the folded structure often deforms with time or with subtle vibration around the fabric specimen during the drape measurement. Due to the uneven and complex nature of fabrics, the overall shape of the fabric specimen on the drape tester often becomes unstable. There is a need to understand the fundamental mechanisms of how draping may generate pleasing forms. Two drape test methods, conventional Cusick drape test, and in-built drape tester, based on a depth camera, are compared. Fabric specimens including cotton, linen, silk, wool, polyester, and rayon are investigated for the fabric drape and other physical/mechanical parameters. Drape coefficient values of fabric specimens are compared based on the final drape images, together with the intermediate 3D drape images of the specimens during elevation process of the drape tester equipped with a stepper motor system. The correlation coefficient between the data based on the two methods is reasonably high. Another advantage from the depth camera system is that it allows further analysis of three-dimensional information regarding the fabric drape shape, including the shape of nodes or crest and trough.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.118-121
• /
• 2005

The claw-pole PM(Permanent Magnet) stepping motor has the advantage of the positioning machine because of a relatively little step angle, facility of control, and detent torque characteristics. Although the research about this motor has been progressed, it was difficult to analyze because of three-dimensional magnetic circuit. This paper proposed a design method of the claw-pole PM stepping motor using 3D-FEA. We established design variables that have an important effect upon the characteristics of the motor, and then peformed analysis of the static and the dynamic characteristics. We also manufactured the test products and practiced the performance tests for verification of the analysis results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.175-179
• /
• 2008

In this study, computational structural vibration analysis of helicopter search light exposing unsteady buffet load have been conducted using combined advanced numerical methods. Unsteady CFD method based on Navier-Stokes equations is used to predict viscous buffet load due to flow separation effects. Full three-dimensional finite element model is constructed in order to conduct static and structural dynamic analyses of the search light model for two different typical flight speeds. Also, the correct performance of the search light can be physically estimated to examine the actual lighting area considering the effects of structural deformations.

• 한국소음진동공학회논문집
• /
• 제19권9호
• /
• pp.870-875
• /
• 2009

In this study, computational structural vibration analysis of helicopter search light exposing unsteady buffet load have been conducted using combined advanced numerical methods. Unsteady CFD method based on Navier-Stokes equations is used to predict viscous buffet load due to flow separation effects. Full three-dimensional finite element model is constructed in order to conduct static and structural dynamic analyses of the search light model for two different typical flight speeds. Also, the correct performance of the search light can be physically estimated to examine the actual lighting area considering the effects of structural deformations.

• 한국지진공학회논문집
• /
• 제2권2호
• /
• pp.95-104
• /
• 1998

수중 케이블의 동적 거동은 비선형 거동을 보이게 되는데 특히 기하하적 비선형성에 크게 영향을 받는다. 또한, 유체의 흐름으로 인하여 동적 거동의 해석은 더욱 복잡하고 어려워지기 때문에 해석적인 접근 방법에는 한계가 있다. 본 연구에서는 탄성 현수선 케이블요소에 동수력을 고려할 수 있게 하였다. 즉, 동수력을 받는 3차원 탄성 현수선 케이블를 정식화하고, 정적 및 동적 해석을 수행할 수 있는 유한요소 방법을 제시하였다. 동수력은 수정된 Morison 방정식을 이용하여 산정하였다. 제시된 방법으로 구한 수중케이블에 관한 동적 거동을 파악하려 하였으며, 정박 또는 예인에 사용하는 수중케이블의 경우 조류의 방향 및 케이블의 경사각에 따른 동적거동의 변화를 알아볼 수 있다.

• International Journal of Concrete Structures and Materials
• /
• 제9권1호
• /
• pp.89-118
• /
• 2015

The geometric nonlinearity of off-diagonal bracing system (ODBS) could be a complementary system to covering and extending the nonlinearity of reinforced concrete material. Finite element modeling is performed for flexural frame, x-braced frame and the ODBS braced frame system at the initial phase. Then the different models are investigated along various analyses. According to the experimental results of flexural and x-braced frame, the verification is done. Analytical assessments are performed in according to three dimensional finite element modeling. Nonlinear static analysis is considered to obtain performance level and seismic behaviour, and then the response modification factors calculated from each model's pushover curve. In the next phase, the evaluation of cracks observed in the finite element models, especially for RC members of all three systems is performed. The finite element assessment is performed on engendered cracks in ODBS braced frame for various time steps. The nonlinear dynamic time history analysis accomplished in different stories models for three records of Elcentro, Naghan and Tabas earthquake accelerograms. Dynamic analysis is performed after scaling accelerogram on each type of flexural frame, x-braced frame and ODBS braced frame one by one. The base-point on RC frame is considered to investigate proportional displacement under each record. Hysteresis curves are assessed along continuing this study. The equivalent viscous damping for ODBS system is estimated in according to references. Results in each section show the ODBS system has an acceptable seismic behaviour and their conclusions have been converged when the ODBS system is utilized in reinforced concrete frame.

• 한국전산구조공학회논문집
• /
• 제37권3호
• /
• pp.197-204
• /
• 2024

본 논문에서는 조선 후기의 대표적인 전통목구조인 수원 화령전 운한각의 구조성능을 평가하였다. 운한각의 가구구성 방식에 맞추어 3차원 구조해석 소프트웨어인 midas Gen으로 해석모델을 정교하게 구축하였다. 정적해석으로 주요 구조부재의 안전성과 사용성을 평가하였고, 고유치해석으로 동적거동특성을 평가하였다. 대부분의 부재가 안전성 및 사용성 기준을 여유 있게 만족하고 있으나, 외목도리에서 휨응력비가 기준을 20.7% 초과하고 있어 이 부재에 대해서는 장기적인 모니터링이 필요하다고 사료된다. 운한각의 고유주기는 1.079초로 비슷한 규모의 전통목구조보다 약간 긴 편이며, 특히 후면 화방벽의 영향으로 2차모드에서 비틀림이 발생한 것으로 분석된다.

• International Journal of Aeronautical and Space Sciences
• /
• 제2권2호
• /
• pp.28-38
• /
• 2001

A numerical method for the assessment and correction of tunnel wall interference effects on forced-oscillation testing is presented. The method is based on the wall pressure signature method using computed wall pressure distributions. The wall pressure field is computed using unsteady three-dimensional full Navier-Stokes solver for a 70-degree pitching delta wing in a wind tunnel. Approximately-factorized alternate direction implicit (AF-ADI) scheme is advanced in time by solving block tri-diagonal matrices. The algebraic Baldwin-Lomax turbulence, model is included to simulate the turbulent flow effect. Also, dual time sub-iteration with, local, time stepping is implemented to improve the convergence. The computed wall pressure field is then imposed as boundary conditions for Euler re-simulation to obtain the interference flow field. The static computation shows good agreement with experiments. The dynamic computation demonstrates reasonable physical phenomena with a good convergence history. The effects of the tunnel wall in upwash and blockage are analyzed using the computed interference flow field for several reduced frequencies and amplitudes. The corrected results by pressure signature method agree well with the results of free air conditions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2076-2082
• /
• 2003

A cross-flow fan is widely used on many industrial fields: mining industry, automobile and home appliances, etc. The design point of the cross-flow fan is generally based on the region within low static pressure and high flow rate. It relatively makes high dynamic pressure at low speed because a working fluid passes through an impeller blade twice. However, it has low static pressure efficiency between 30% and 40% because of relative high impact loss. Recently, in the air-conditioning systems, the operating behaviors at the off-design points are highly regarded to broaden the application area for various air-cooling loads. Especially, at the lower flow rate, there exists a rapid pressure head reduction, a noise increase and an irregular flow field against a rearguider as a scroll of centrifugal fan. Numerical analyses are carried out for investigating the flow characteristics in a cross-flow fan including the impeller, the rearguider and the stabilizer. Especially, various types of rearguiders are estimated by numerical and experimental methods to insure the stable operation in the region of lower flow rate. Numerical domains are discretized by hexahedral cells. Three-dimensional, unsteady governing equations are solved using FVM, PISO algorithm, sliding grid system and standard ${\kappa}-{\varepsilon}$ turbulence model. ASHRAE standard fan tester is also used to estimate the performance of the modeled crossflow fan.

• 대한토목학회논문집
• /
• 제7권2호
• /
• pp.141-153
• /
• 1987

고층 건물의 정확한 거동을 구하기 위한 구조 해석은 컴퓨터 적용의 중요한 분야로 취급되어 왔다. 본 논문에서는 건축구조물에 대한 3차원적인 해석방법을 연구하였다. 이 해석 방법은 건물을 각각의 독립된 프레임의 조합체로 보고 해석하므로 매우 효율적이며, 건물의 3차원적인 거동에 관한 고려는 건물이나 하중이 대칭이 아닐 때는 특히 중요하다. 그리고 matrix condensation 기법을 이용함으로써 컴퓨터의 용량과 해석 시간이 상당히 절약되므로 매우 경제적이다. 본 논문의 건물 구조해석 컴퓨터 프로그램 PFS의 정확성과 효율성을 증명하기 위해 여러가지 예제들에 대해서 SAPIV 에 의한 해석 결과와 비교하였다. 그러므로, 본 논문에서 제안한 해석방법은 고층 건물의 구조 설계에서 매우 효율적이라 할 수 있다.