• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.3
• /
• pp.303-314
• /
• 1998

In this study, the performance of a multi-stage condensation heat pump was examined. Computer simulation programs were developed for 1-stage, 2-stage, and 3-stage heat pumps and R11, R123, R141b were tested as working fluids. The results showed that coefficients of performance(COPs) of an optimized 3-stage condensation heat pump are 25∼40% higher than those of a conventional 1-stage heat pump. The increase in COP, however, differed among the fluids tested. The improvement in COP largely stems from the decrease in average LMTD values in the condensers of the multi-stage system. For the 3-stage condensation heat pumps, optimized UA values of three condensers were determined to be 30∼40% of the UA value of the total condenser regardless of the working fluid. When the amount of cooling water entering into the intermediate and high-stage subcoolers is roughly 10% of the total condenser cooling water respectively, the optimum performance was achieved for the 3-stage condensation heat pump.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.3
• /
• pp.86-93
• /
• 2008

This paper presents a design of the reticle stage for lithography using VCM(Voice Coil Motor) and kinematic analysis. The stage has three axes for X,Y,${\theta}_z$, those actuated by three VCM's individually. The reticle stage has cross coupled relations between X,Y,${\theta}_z$ axes, and the closed solution of the forward/inverse kinematics were solved to get an accurate reference position. The reticle stage for lithography was designed for reaching both high accuracy and long stroke, which was $0.1{\mu}m$ (X,Y)/ $1{\mu}rad({\theta}_z)$ accuracies and relatively long strokes about 2mm (X,Y) and 2 degrees(${\theta}_z$). Also this research presents a rotational compensation algorithm for the precision gap sensor for the stage. Simulation results show the overall performance of the whole algorithm and the improvement quantity of the rotational compensation algorithm.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.2
• /
• pp.95-100
• /
• 1998

Seedling establishment of soybean [Glycine mar (L.) Mer-rill] is an important factor for soybean production in the field. The objective of this study was to determine the distribution of chemical composition in the emerging organs during seedling development in soybeans. Three soybean cultivars (Hill, Paldalkong, and Jangyeobkong) were planted at the Research Farm of College of Natural Resources, Korea University, on May 26, June 5, and June 14. Protein, oil, sugar, and starch contents were measured in each organ at each developing stage. Mean dry weight of three soybean cultivars decreased until VE stage and increased after this stage. Protein content of whole seedling did not change significantly during the seedling growth stage, but the amount in cotyledons markedly decreased with each growth stage increment. About 88% of the cotyledon protein was translocated to the other parts of the seedling at the V2 stage. Oil content of cotyledons sharply decreased until the V1 stage. Sugar content of the seedling was not detected at VE stage and starch content of seedlings increased slightly at VE and VC stages. For the changes of each metabolic component, the amount for whole plants decreased until the V1 stage and started to increase after this stage. The results of this study provide evidence for the breakdown of carbohydrates and oil at the initial stage of seedling growth.

• Journal of Distribution Science
• /
• v.15 no.8
• /
• pp.15-28
• /
• 2017

Purpose - Many researchers analyze VMI as a supply chain collaboration program to reveal its true value. Most of them focus on the dyadic relationship in two stage supply chain systems. This study examines the effect of VMI when it is applied to the different parts of three stage supply chain systems. Research design, data, and methodology - Based on three stage supply chain, this study compares three different systems including full VMI, partial VMI, and non-VMI by using mathematical models. The performances of three systems are compared with the numerical examples of the proposed supply chain models. Results - The numerical examples reveal that full VMI where the manufacturer controls inventories at all stages outperforms any other systems in terms of the system profit and enables all individual members to gain greater profits than non-VMI. Meanwhile, under partial VMI where VMI is implemented between the wholesaler and retailer, only these two members improve their performances and the manufacturer who does not belong to VMI makes less profit than even under non-VMI. This study also examines the impact of market size and profit margin on the system performance. Conclusions - The result of this study supports the common belief that VMI secures the best result when it is applied to the entire supply chain system. The additional findings from the numerical analysis are discussed.

• Journal of Power Electronics
• /
• v.10 no.2
• /
• pp.155-164
• /
• 2010

This paper presents a voltage control algorithm for a hybrid multilevel inverter based on a staged-perception of the inverter voltage vector diagram. The algorithm is applied to control a three-stage eighteen-level hybrid inverter, which has been designed with a maximum number of symmetrical levels. The inverter has a two-level main stage built using a conventional six-switch inverter and medium- and low- voltage three-level stages constructed using cascaded H-bridge cells. The distinctive feature of the proposed algorithm is its ability to avoid the undesirable high switching frequency for high- and medium- voltage stages despite the fact that the inverter's dc sources voltages are selected to maximize the number of levels by state redundancy elimination. The high- and medium- voltage stages switching algorithms have been developed to assure fundamental switching frequency operation of the high voltage stage and not more than few times this frequency for the medium voltage stage. The low voltage stage is controlled using a SVPWM to achieve the reference voltage vector exactly and to set the order of the dominant harmonics. The inverter has been constructed and the control algorithm has been implemented. Test results show that the proposed algorithm achieves the desired features and all of the major hypotheses have been verified.

• Communications for Statistical Applications and Methods
• /
• v.28 no.5
• /
• pp.411-424
• /
• 2021

Inference following two-stage adaptive designs (also known as two-stage randomization designs) with survival endpoints usually focuses on estimating and comparing survival distributions for the different treatment strategies. The aim is to identify the treatment strategy(ies) that leads to better survival of the patients. The objectives of this study were to assess the performance three commonly cited methods for estimating survival distributions in two-stage randomization designs. We review three non-parametric methods for estimating survival distributions in two-stage adaptive designs and compare their performance using simulation studies. The simulation studies show that the method based on the marginal mean model is badly affected by high censoring rates and response rate. The other two methods which are natural extensions of the Nelson-Aalen estimator and the Kaplan-Meier estimator have similar performance. These two methods yield survival estimates which have less bias and more precise than the marginal mean model even in cases of small sample sizes. The weighted versions of the Nelson-Aalen and the Kaplan-Meier estimators are less affected by high censoring rates and low response rates. The bias of the method based on the marginal mean model increases rapidly with increase in censoring rate compared to the other two methods. We apply the three methods to a leukemia clinical trial dataset and also compare the results.

• Journal of Korean Medical classics
• /
• v.20 no.3
• /
• pp.57-65
• /
• 2007

This present study tried to observe an each feature that the difference of Neijing(內經) and Nanjing(難經) descriptions about the three-portion and nine-position pulse taking(三部九候脈). It was interpreted and contradistinguished that discrimination of position, diagnosis object, and the perceptions of Earth of the center among the Five Phase of each literature were described in Neijing and Nanjing for the three-portion and nine-position(三部九候). In Neijing, the three-portion and nine-position method divided three parts the whole body. Then the each three parts again divided with Heaven, Earth and Man(天地人). About the corresponding parts of pulse diagnosis, there mentioned for the head and the Zang-Fu organs(臟腑), but not mentioned for the hand and foot. In addition, Earth is assigned to the Earth(土), an each Earth accounted for the source of life. In Nanjing, three-portion divided Chon, Gwan, and Cheok(寸關尺) and each spots separated three stage of pulse taking. For the pulse taking spots and diagnosis, there mentioned the hand and foot instead of the unclear mention of Zang-Fu organs. Then Gwan spot and middle stage of pulse taking were assigned to the Earth, respectively. It was emphasized stomach Qi(胃氣) that the region of Earth, Gwan spot and middle stage among the pulse taking spots each literature were described in Neijing, Nanjing.

• Korean Institute of Interior Design Journal
• /
• v.18 no.1
• /
• pp.3-10
• /
• 2009

The relationship between light and space is fundamental In an opera stage design. In contemporary stage design, light, color and space themselves became one of tile most important elements to express and symbolize the content of the opera. This was very different compared to the primitive and medieval opera stage design in the past. The designer tried to represent the same periodical background of the opera with exact replica of the buildings as well as costumes. In comtemporary performance art, light became one the most important aspects in design. Max Keller is one of the living pioneers in stage lighting design. This thesis that is based on his lighting experiments and projects attempts to examine how contemporary stage design and light are applied and what kind of characteristics they have. One of the Wagner's opera, "Tristan und Isolde" was selected to be further analyzed. Three different "Tristan und Isolde" opera stage designs were carefully studied in terms of how three designs are differently constructed for specific same contents of the opera. This sort of comparison study is crucial when there is a strict parameter that is the opera itself. It was found that three opera stages have very different stage designs and unique ways of expressing the opera flow and contents. However, in some parts, very similar lightings were used. This sort of multi-disciplinary study can be helpful to re-think the interior environment by applying light as a fundamental medium.

• Smart Structures and Systems
• /
• v.29 no.1
• /
• pp.29-39
• /
• 2022

Crack detection plays an important role in the maintenance and protection of steel box girder of bridges. However, since the cracks only occupy an extremely small region of the high-resolution images captured from actual conditions, the existing methods cannot deal with this kind of image effectively. To solve this problem, this paper proposed a novel three-stage method based on deep learning technology and morphology operations. The training set and test set used in this paper are composed of 360 images (4928 × 3264 pixels) in steel girder box. The first stage of the proposed model converted high-resolution images into sub-images by using patch-based method and located the region of cracks by CBAM ResNet-50 model. The Recall reaches 0.95 on the test set. The second stage of our method uses the Attention U-Net model to get the accurate geometric edges of cracks based on results in the first stage. The IoU of the segmentation model implemented in this stage attains 0.48. In the third stage of the model, we remove the wrong-predicted isolated points in the predicted results through dilate operation and outlier elimination algorithm. The IoU of test set ascends to 0.70 after this stage. Ablation experiments are conducted to optimize the parameters and further promote the accuracy of the proposed method. The result shows that: (1) the best patch size of sub-images is 1024 × 1024. (2) the CBAM ResNet-50 and the Attention U-Net achieved the best results in the first and the second stage, respectively. (3) Pre-training the model of the first two stages can improve the IoU by 2.9%. In general, our method is of great significance for crack detection.

• Transactions of Materials Processing
• /
• v.17 no.3
• /
• pp.155-160
• /
• 2008

We analyzed a sequence of multi-stage automatic cold forging processes composed of four axisymmetric processes followed by a non-axisymmetric process using rigid-plastic finite element based forging simulators. The forging sequence selected for an example involves a piercing process and a heading process accompanying folding or overlapping, which all make it difficult to simulate the processes. To reduce computational time and to enhance the solution reliability, only the non-symmetric process was analyzed by the three-dimensional approach after the axisymmetric processes were analyzed by the two-dimensional approach. It has been emphsized that this capability is very helpful in simulating the multi-stage automatic forging processes which are next to axisymmetric or involve several axisymmetric processes.