• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.2
• /
• pp.176-183
• /
• 2014

Three-phase four-wire distribution systems are used for both three-phase three-wire loads and single-phase two-wire consumer appliances in South Korea, Myanmar and other countries. Unbalanced load conditions frequently occur in these distribution systems. These unbalanced load conditions cause unbalanced voltages for three-phase and single-phase loads, and increase the loss in the distribution transformer. In this paper, we propose constant DC capacitor voltage control based strategy for the active load balancer (ALB) in the three-phase four-wire distribution systems. Constant DC capacitor voltage control is always used in active power line conditioners. The proposed control strategy does not require any computation blocks of the active and reactive currents on the distribution systems. Balanced source-side currents with a unity power factor are obtained without any calculation block of the unbalanced active and reactive components on the load side. The basic principle of the constant DC capacitor voltage control based strategy for the ALB is discussed in detail and then confirmed by both digital computer simulations using PSIM software and prototype experimental model. Simulation and experimental results demonstrate that the proposed control strategy for the ALB can balance the source currents with a unity power factor in the three-phase four-wire distribution systems.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.822-828
• /
• 2018

AC-DC conversion is a necessary for the systems that require DC source. This conversion has been done via rectifiers based on controlled or uncontrolled semiconductor switches. Advances in the power electronics and microprocessor technologies allowed the use of Pulse Width Modulation (PWM) rectifiers. In this paper, dq-axis current and DC link voltage of three-phase PWM rectifier are controlled by using type-2 fuzzy neural network (T2FNN) controller. For this aim, a simulation model is built by MATLAB/Simulink software. The model is tested under three different operating conditions. The parameters of T2FNN is updated online by using back-propagation algorithm. The results obtained from both T2FNN and Proportional + Integral + Derivate (PID) controller are given for three operating conditions. The results show that three-phase PWM rectifier using T2FNN provides a superior performance under all operating conditions when compared with PID controller.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2552-2557
• /
• 2007

Shape optimization of an internal cooling passage with staggered dimples on single surface is performed and performances of surrogates are evaluated in this paper. Optimizations are performed so that turbulent heat transfer can be enhanced compromising with pressure loss due to friction. The three-dimensional governing differential equations have been solved to find the overall Nusselt number and friction factor which are related to the objective functions of this problem. Three design variables were selected among the dimensionless geometric variables. Basic surrogate models such as second order polynomial response surface approximation (RSA), Kriging meta-modeling technique, radial basis neural network (RBNN), and derived press based averaged (PBA) surrogate model are constructed. The optimal points are searched from the above constructed surrogates by sequential quadratic programming (SQP). It is shown that use of multiple surrogates can increase the robustness in prediction of better design with minimum computational cost.

• Journal of the Korean housing association
• /
• v.14 no.1
• /
• pp.77-86
• /
• 2003

The purpose of this study is to set up a model of affective evaluation to structurally and systematically analyse subjective affective expressions of human beings with regard to the residential environment and to analyse the correlation between affective responses of residents and physical elements by positively applying the model to the evaluation of outdoor space of apartment complexes as an area of study on evaluation of residential environment. The area for evaluation was limited to three apartment complexes situated in Daegu, and the subjects for evaluation were also limited to a group of residents(housewives) living at the three apartment complexes. The research method is summarized as follows. 214 affective words(adjective phrases) expressing outdoor space of apartments were selected from literature on random sampling basis, and reduced to 25 ones through factor analysis. Then, these 25 words were systematized by an affective evaluating scale with 7 categories of meaning. The evaluation was conducted with 324 homemakers living at the apartment complexes selected for evaluation from September 29, 2000 to October 5, 2000. SPSSWIN, a statistical program was used for analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.161.2-161
• /
• 2001

To achieve a cooperative work between human and robot, it is thought helpful to estimate the states of human mind, which originates his behavior. In this paper, human mind was considered to modify instinctive desires according to the conditions of external world surrounding the instinct. A simple human mind model was designed so that it finds a balance between instinctive desire and restriction from the external world. The external world is divided into three sub-worlds like subject´s whole body, its partner and concerned periphery. Proposed mind model has three-layers construction. Each of the layer tries to find a balance between desire and restriction from external world. In each layer, the role of finding the balance was expressed by an identical optimal control minimizing a performance index function of quadratic form with a weight factor, which is rearranged and named ...

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.38
• /
• pp.217-224
• /
• 1996

Recently groupware has been popularly adopted by corperations to gain competitive position. In Korea, one of major function of those systems is the Electronic Authorizing System because korean firms have authorizing system but western firms do not. Thus researches on EAS has never been produced before. The purpose of this research is to build the research framework for productivity measurement of EAS. The research model of EAS has investigated three dimensions including Business process, ease of system use and media richness to meet this end. Based on this model, author conducted case study with mailing questionaires. The result of research shows that the factors of the business process and ease of system use raise the productivity but the factor of electronic media a little decreases it. Also author finds business process affects the productivity in three ways such as changing layout of papers for authorizing, changing business process and removing waiting time for authorization. Finally, based on the result of research, this paper adds some recommendations for EAS builder.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.15-23
• /
• 1998

A three dimensional simulation of the fluid flow in an automotive torque converter was conducted adopting the mixing plane model implemented in the computational fluid dynamics program CFD-ACE. The present numerical results for performance characteristics showed a good agreement with the experimental results. In the flow of the torque converter, recirculating flow regimes were found mostly at the suction side of each element, which caused the performance decrease. The recirculating flow can be minimized by the optimization of the blade geometries.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.5
• /
• pp.83-83
• /
• 2004

The analysis of relative pose(position and rotation) between stereo cameras is very important to determine the solution that provides three-dimensional information for an arbitrary moving target with respect to robot-end. In the space of free camera-model, the rotational parameters act on non-linear factors acquiring a kinematical solution. In this paper the general solution of active stereo that gives a three-dimensional pose of moving object is presented. The focus is to achieve a derivation of linear equation between a robot′s end and active stereo cameras. The equation is consistently derived from the vector of quaternion space. The calibration of cameras is also derived in this space. Computer simulation and the results of error-sensitivity demonstrate the successful operation of the solution. The suggested solution can also be applied to the more complex real time tracking and quite general and are applicable in various stereo fields.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.5
• /
• pp.89-90
• /
• 2004

The analysis of relative pose(position and rotation) between stereo cameras is very important to determine the solution that provides three-dimensional information for an arbitrary moving target with respect to robot-end. In the space of free camera-model, the rotational parameters act on non-linear factors acquiring a kinematical solution. In this paper the general solution of active stereo that gives a three-dimensional pose of moving object is presented. The focus is to achieve a derivation of linear equation between a robot's end and active stereo cameras. The equation is consistently derived from the vector of quaternion space. The calibration of cameras is also derived in this space. Computer simulation and the results of error-sensitivity demonstrate the successful operation of the solution. The suggested solution can also be applied to the more complex real time tracking and quite general and are applicable in various stereo fields.

• Computers and Concrete
• /
• v.27 no.1
• /
• pp.55-62
• /
• 2021

The concrete fatigue analysis can be performed with the use of fracture mechanics. The fracture mechanics defines the fatigue crack propagation as the relationship of crack growth rate and stress intensity factor. In contrast to metal, the application of fracture mechanics to concrete is more complicated and therefore many authors have introduced empirical expressions using Paris law. The topic of this paper is development of a new prediction of fatigue crack propagation for concrete using rheological-dynamical analogy (RDA) and finite element method (FEM) in the frame of linear elastic fracture mechanics (LEFM). The static and cyclic fatigue three-point bending tests on notched beams are considered. Verification of the proposed approach was performed on the test results taken from the literature. The comparison between the theoretical model and experimental results indicates that the model proposed in this paper is valid to predict the crack propagation in flexural fatigue of concrete.