• Restorative Dentistry and Endodontics
• /
• v.7 no.1
• /
• pp.7-15
• /
• 1981

This study was conducted to compare the cleansing effect of various irrigants and the function of the quantity of irrigants in apical region. One hundred sixty single rooted teeth were divided into four groups and fourty teeth in each group were individually enlarged and irrigated with each of four irrigants as they would be during clinical condition. The four tested irrigants were Normal saline solution, 3.5% NaOCl, 15% EDTA, and 50% Citric acid. In each group, twenty teeth were flushed with 2cc of each irrigant and another twenty teeth with 5cc of same irrigant after use of each instrument. After final flush and dry, the roots were split longitudinally and the degree of cleansing at apical portion were evaluated under Stereoscope by three observers. The typical specimens of each group were also examined under Scanning electron microscope. The results were as follows. 1. There were no significant difference of cleansing effect among the tested irrigants. 2. 5cc flushed groups have more samples that have high degree of cleansing than 2cc flushed groups. 3. The canals irrigated with 2cc showed the presence of many dentin chips, tissue debris and smeared layer, whereas the 5cc groups revealed relatively clean canal surface and less smeared layer under Scanning electron microscope. 4. The teeth flushed with 5cc of EDTA and with 5cc of Citric acid showed the most clean canal surface at Scanning fictures.

• Restorative Dentistry and Endodontics
• /
• v.29 no.3
• /
• pp.212-218
• /
• 2004

The purpose of this study was to quantify the amount of remaining gutta-percha/sealer on the walls of root canals when three types of nickel-titanium rotary instruments (Profile. ProTaper and $K^3$) and a hand instrument(Hedstrom file) used to remove these materials. The results of this study were as follows: 1. In the total time for gutta-percha removal. Profile group was the fastest and followed by $K^3$, Protaper, Hedstrom file group. 2. In case of the evaluation of the volume of remained gutta-percha from radiograph. $K^3$ group got the highest score and followed by Protaper. Hedstrom file. Profile group in the apical 1/3. 3. In case of the evaluation of the volume of gutta-percha remained from stereomicroscope, $K^3$ group got the highest score and followed by Protaper. Hedstrom file. Profile group in the apical 1/3. These results showed that instrumentation using nickel-titanium rotary instrument groups was faster than that using hand instrument group. The effect of gutta-percha removal using Profile group was better than that using Protaper and $K^3$ group in the nickel-titanium rotary instrument groups.

• Applied Microscopy
• /
• v.35 no.2
• /
• pp.89-96
• /
• 2005

The ultrastructures of the fertilized egg envelope from Hyphessobrycon serpae belonging to Characidae was studied using scanning and transmission electron microscopes to get systematic fundamental data for classification of species and to confirm whether micropyle is a common trait of Characidae or not. The fertilized egg was of colorless, transparent, spherical, adhesive and demersal type. There were not oil droplets in vitelline membrane and attached structures in the outside of fertilize egg envelope. The egg envelope had a single micropyle resembling the pathway of sperm in the area of the animal pole. The micropyle was surrounded by 13 to 15 protruded lines of the egg envelope in a radiated form. The outer surface of fertilized egg envelope was covered by reticular adhesive fibrous structures and irregularly arranged by pore canals. The fertilized egg envelope consisted of three distinct layers an outer adhesive fibrous layer with high electron density, a middle layer with pore canals, and an inner layer consisting of 6 to 7 lamellae alternating layers with interlamellae of lower electron density. These ultrastructural characters of fertilized egg envelope form Hyphessobrycon serpae can be utilized in taxonomy of teleost, and as fundamental data for study on early development of fertilized egg. It seems that the morphology of micropyle is a common trait of Characidae

• Restorative Dentistry and Endodontics
• /
• v.31 no.1
• /
• pp.11-19
• /
• 2006

The purpose of this study was to compare and evaluate the shaping abilities of various hybrid instrumentation method using constant tapered file systems with $ProTaper\^{(R)}$ S1 and the difference between experts and inexperienced clinicians in use of NiTi file. Three hybrid methods used in this study were composed of $ProTaper\^{(R)}\;S1\;and\;K-Flexofile\^{(R)}\;(group S),\;ProTaper\^{(R)}\;S1\;and\;HeroShaper\^{(R)}\;(group\;H),\;and\;ProTaper\^{(R)}\;S1\;and\;ProFile\^{(R)}\;(group\;P)$respectively. The $ProTaper\^{(R)}$-alone method (group C) was introduced as a control group. After canal preparation, the lapse of time was recorded. The images of pre- and post-operative canal were scanned and superimposed. Amounts of instrumented canal widths and centering ratio were measured at apical 1, 2 and 3 mm levels and statistical analysis was performed In this study. both of the group C and S took more time to prepare canals than other groups, Inexperienced operators required more time for the entire preparation with the groups C and H than the experienced (p<0.05). And the centering ratio of group P were preferable to $ProTaper\^{(R)}$-alone method or the hybrid technique using stainless steel files. As such, within experienced operators, group H also showed better results in addition to the group P. Under these condition, the hybrid methods of each the $ProFile^{(R)}$ system and $HeroShaper^{(R)}$ with ProTaper are recommendable comparative to $ProTaper\^{(R)}$-alone method. According to the results, the hybrid instrumentation method is a more appropriate method of canal preparation than single file system for narrow or curved canals.

• Korean Journal of Plant Resources
• /
• v.25 no.5
• /
• pp.517-522
• /
• 2012

This study was conducted to investigate the morphological and anatomical characteristics of needle and the genetic diversity of Pinus pumila Regel which is a unique and the southern peripheral population in South Korea. ANOVA test showed that there were significant differences among individuals within population in all 8 needle characteristics. Average characteristics of 66 individuals were 53.59 mm in needle length, 0.78 mm in needle width, 68.98 in needle index, 0.65 mm in needle thickness, 4.56 ea. in maximum stomata row, 3.80 ea. in minimum stomata row, 8.36 ea. in total stomata row and 1.71 ea. in resin canals, respectively. Resin canal per needle of this species ranged from one to three, depending on external type. Especially, arrangement types were 69.47% in two resin canals and 30.45% in a single resin canal. A total of 78 bands was generated from 9 selected I-SSR primers. The estimates of genetic variation were 61.5% in proportion of polymorphic bands (P), 1.698 in effective number of alleles ($A_e$), 0.388 in expected heterozygosity ($H_e$) and 0.567 in Shannon's information index (S.I.), respectively.

• Restorative Dentistry and Endodontics
• /
• v.26 no.1
• /
• pp.77-85
• /
• 2001

The purpose of this in vitro study was to compare the apical leakage in extracted teeth filled with gutta-percha subsequent to dressing with one of three different calcium hydroxide preparations. Thirty six extracted teeth with single canal were used in this study. After working length determination, canals were prepared with K flexo files to a #40 at the working length. Step-back flaring was produced by using #45, #50 K flexo files and #2, #3, #4 Gates Glidden burs. The teeth were randomly divided into 3 groups of 10 each : the remaining six teeth were used for negative and positive leakage control: Group 1, dressed with pure calcium hydroxide powder (Sigma, USA) mixed with distilled water; Group 2, dressed with Metapaste (Metadent, Korea) ; Group 3, dressed with Vitapex (Neo Dental, Japan). Teeth were sealed with Caviton (GC, Japan) and incubated in 100% humidity, at 37$^{\circ}C$ for 1 wk. All kinds of calcium hydroxide were removed from the canal with a MAF and 5% NaOCl. The canals were filled with AH-26$^{\circledR}$ sealer and gutta-percha using lateral condensation technique, incubated in 100% humidity, at 37$^{\circ}C$ for 2 days for the sealer to be set. The teeth were coated twice with nail varnish except for an area of approximately 2mm surrounding the apical foramen. All specimens were placed in 2% methylene blue solution for 2 days. The root were sectioned longitudinally, the amount of apical leakage was measured to the most coronal part of the root canal to which the dye had penetrated. The independent measurements were made for each root using a stereomicroscope ($\times$40 magnification) and the average was recorded for statistical analysis. The results were as follows ; 1. The mean of apical leakage in group of pure calcium hydroxide ranged 0.102$\pm$0.156mm, in Metapaste$^{\circledR}$ ranged 0.062$\pm$0.069mm, and in Vitapex$^{\circledR}$ ranged 0.067$\pm$0.072mm. 2. Group of pure calcium hydroxide exhibited more leakage than those of 2 manufactured calcium hydroxide preparations, but it was not statistically significant. 3. Group of water-based Metapaste$^{\circledR}$ showed lesser leakage than that of oil-based Vitapex$^{\circledR}$, but it was not statistically significant.

• Journal of Korean Society of Forest Science
• /
• v.34 no.1
• /
• pp.1-14
• /
• 1977

These studies were carried out to know the variation of morphological tree forms, needles, cotyledons, seed characters and top height growth of seedlings of Pinus koraiensis S. et Z. by populations in Mt. Jiri. The results are summarized as follows: 1. It was observed that the characteristics of length, needles of serration density of needles, percentage of full seeds length, of seeds, thickness, of seeds length of cotyledons, width of cotyledon, numbers of the stomata line in cotyledons and the top height growth of seedlings were significantly different in individual trees and populations. 2. The characteristics of branch angle specific gravity of wood and resin canal numbers of cotyledons were significantly different in populations. 3. It was that the characteristics of numbers of stomata line, width, of seeds weight, of seeds serration density of cotyledons, numbers of cotyledons were significantly different in individuals. 4. The resin canals of needles showed three principle resin canals in individual trees and population, and the coefficients of variation were not shown in individual trees and populations. Stem forms showed to be a straight form with all populations. 5. The characteristics of cotyledons had generally higher tendency than the characteristics of needles in comparison with coefficience of variation.

• Restorative Dentistry and Endodontics
• /
• v.9 no.1
• /
• pp.59-68
• /
• 1983

The purpose of this study was to examine the influence of canal irrigants and the method of canal filling on the quality of canal obturation. Sixty extracted human teeth with single root were selected and divided into three different groups; In group I (control); 5 cc normal saline irrigated after each instrumentation In group II; 2.5 cc-3% NaOCl in combination with 2.5 cc-3% $H_2O_2$ In group III; RC-Prep in combination with 5 cc-3% NaOCl All specimens were cleaned, shaped(#50 file size), irrigated and obturated by lateral condensation and automated thermatic condensation filling method of gutta-percha and AH-26. After all the specimens were immersed in 2% methylene blue dye solution in $37^{\circ}C$ for 7 days and the degree of dye penetration into the canals observed by magnifying glass(${\times}$20) and reflected light microscope The results were as follows: 1. All the the teeth showed some degree of the dye penetration. 2. There were no significant difference among three groups in the degree of the dye penetration in each canal filling method. 3. There were no significant difference of the dye penetration between each canal filling method in group I. 4. There were no statistically significant difference of the dye penetration between each canal filling method in group II and group III, but lateral condensation group was showed slightly more than automated thermatic condensation group.

• Imaging Science in Dentistry
• /
• v.39 no.1
• /
• pp.41-49
• /
• 2009

Purpose: To detect the progression of experimentally induced periapical lesions on periapical radiograph and cone beam computed tomograph (CBCT) by quantitative analysis. Materials and Methods: After the removal of coronal pulps from premolars of two Beagle dogs, the root canals of premolars were exposed to oral environment during one week and then sealed for 70 days. Digital periapical radiographs and CBCTs were taken at baseline and every 7 days for 77 days after pulp exposure. We examined occurrence and areas of periapical bone resorption. Three comparative groups of CBCT radiographs were prepared by average projection of thin slabs with different bucco-lingual thicknesses (0.1, 3.0, and 8.0 mm) using a 3D visualization software. Radiographic densities were compensated by image normalization. Digital images were processed with mathematical morphology operations. The radiographic density and morphological features of periapical lesions were compared among three groups of CBCT in different time points. Results: In the CBCT group with 0.1 mm thickness, radiographic density (p<0.05) and trabecular bone area (p<0.01) were significantly decreased at the fifth week. However, in the CBCT groups with 3 mm and 8 mm thickness and periapical radiographs, none of densitometric and morphological features showed any significant differences in different time points. Radiographic density of periapical lesion showed increasing tendency at the eleventh week after pulp exposure. Conclusion: Radiographic detection of periapical lesions was possible at the fifth week after pulp contamination by quantitative method and was affected by buccolingual bone thickness.

• Applied Microscopy
• /
• v.29 no.2
• /
• pp.177-187
• /
• 1999

Ultrastructure of gametes in the three-spine stickleback, Gasterosteus aculeatus aculeatus was observed, utilizing light, scanning and transmission electron microscopes. The egg of three-spine stickleback is spherical and demersal type. The eggs are highly adhesived to each other but not to substrates. There are many oil droplets in vitelline membrane. The outer surface of egg envelope is arranged by mushroom-like structures and pore canals. The egg have a micropyle, sperm entry site, in the area of the animal pole. The egg envelope consists of three layers, an outer layer with high electron density, a middle layer consisting two layers and an inner layer consisting of 16 to 20 layers. In the fertilized egg envelope, the molecular weights of these components ranged from 14 kDa to 205 kDa. The molecular weights of nam protein bands are 19.4 kDa, 36.7 KDa, 39.4 kDa, 42.9 kDa, 46.1 kDa and 53.0 kDa. The head of spermatozoa is spherical shape and the acrosome is absent. The mitochondria in midpiece are arranged from one to three layers and separated from the axoneme by the cytoplasmic canal. The tail has two lateral fins and the axoneme is of the 9+2 structure.