• Neonatal Medicine
• /
• v.18 no.2
• /
• pp.301-309
• /
• 2011

Purpose: Point-of-care tests (POCTs) have the potential to significantly influence management of neonates. The aim of this study was to assess the clinical usefulness of the POCT chemistry analyzer in a neonatal intensive care unit (NICU). Methods: Blood samples of neonates admitted to the NICU were tested using a POCT chemistry analyzer (Piccolo Xpress Chemistry Analyzer, Abaxis, Union City, CA, USA) and a central laboratory chemical analyzer (Chemistry analyzer 7600-110, Hitachi Ltd., Tokyo, Japan) from March to September, 2010. Correlation of 15 analytes between the POCT and the central laboratory machine was evaluated. For consistency of the POCT, three consecutive samplings were performed. Differences among the three tests were recorded. The causes of performance errors were checked through log files. Results: One hundred of 112 pairs of tests for accuracy performed in 54 neonates showed a high correlation between the two machines. Twelve performance errors occurred during the 112 tests. The most common error was insufficient sample error. Eighteen triplet tests performed in 18 patients for consistency revealed a difference range of 3-10%, which was considered to be acceptable. No error occurred during the 54 tests. Conclusion: The POCT is capable of analyzing multiple analytes with a minimal amount of whole blood in a short time. The few performance errors noted presently are likely preventable. This POCT is concluded to be suitable for use as a simple and rapid diagnostic method in the NICU with a minimal amount of blood collected in a less invasive manner.

• Archives of Reconstructive Microsurgery
• /
• v.19 no.1
• /
• pp.12-20
• /
• 2010

Purpose: Industrial punch accidents involving fingers cause segmental injuries to tendons and neurovascular bundles. Although multiple-level segmental amputations are not replanted to regain function, most patients with an amputated finger want to undergo replantation for cosmetic as much as functional reason. The authors describe four cases of digital amputation by an industrial punch that involved the reinstatement of the amputated finger involving a joint and neurovascular bundle. Amputated segments were replanted to restore amputated surfaces and distal segments. Methods: A single institution retrospective review was performed. Inclusion criteria of punch injuries requiring replantation were applied to patients of all demographic background. Injury extent (size, tissue involvement), operative intervention, pre- and postoperative hand function were recorded. Result: Four cases of amputations were treated at our institute from 2004 to 2008 from industrial punch machine injury. Average patient age was 32.5 years (25~39 years) and there were three males and one female. Sizes of amputated segments ranged from $1.0{\times}1.0{\times}1.2\;cm^3$ to $3{\times}1.5{\times}1.6\;cm^3$. Tenorrhaphy was conducted after fixing fractured bone of the amputated segments with K-wire. Proximal and distal arteries and veins were repaired using the through & through method. The average follow-up period was thirteen months (2~26 months), and all replanted cases survived. Osteomyelitis occurred in one case, skin grafting after debridement was performed in two cases. Because joints were damaged in all four cases, active ranges of motion were much limited. However, a secondary tendon graft enhanced digit function in two cases. The two-point discrimination test showed normal values for both static and dynamic tests for three cases and 9 mm and 15 mm by dynamic and static testing, respectively, in one case. Conclusion: Though amputations from industrial punch machines are technically challenging to replant, our experience has shown it to be a valid therapy. In cases involving punch machine injury, if an amputated segment is available, the authors recommend that replantation be considered for preservation of finger length, joint mobility, and overall functional recovery of the hand.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1510-1519
• /
• 2007

This comparative study analyzes and compares tight skirt sewing methods which are found in the clothing configuration reference text books available in contemporary universities and which are used in commercially-available domestic consumer products. The study samples included 15 text books and 12 tight skirt consumer products of different brands on sale at three department stores in Seoul each of which had a belt, a back-centered zipper, and back double slits. The findings of the study are summarized as follows: First, text books mainly show very basic sewing methods of using zippers on both sides of the straight-lined waist belt. This indicates that it is necessary for such methods to be complemented so that they cover a recent variety of designs, materials, and sewing machines. For consumer products, the main sewing method is to use a curved waist belt and a console zipper in silhouette running across half the hipbone. Second, consumer products employ three different types of cutting and sewing methods for putting an inseam on the center of the back slit part: to leave the whole inseam hemmed in the back center, to cut the left side of the inseam to the upper part of the back slit, and to cut the inseam to both the upper parts of the back slit. However, a method shown in most of the sampled text books is to cut the inseam of the back center to both the upper parts of the back slit. Third, the way of finishing a bottom edge hem in the text books is to do slip-stitch, herringbone stitch, and slinting hemming, in order after doing over-lock stitch, or to cut the hem on the bias and then slip-stitch, while for the consumer products the most frequently used sewing method is to finish the bottom edge hem by doing secoui-stitch. Finally, while in the text books the method of stitching darts and tucks is used for lining, the main lining method used in consumer products is to make tucks only. Also in the way of stitching the side seams of lining or the seams of the back center, there is a difference between the two sample groups of text books and the consumer products: while the former suggests using both open seams and over-lock stitch, the latter is found to finish the seams using an over-lock stitch only.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1123-1129
• /
• 2015

A pair of two-way valves typically is used in automotive washing machines, where the water flow direction is frequently reversed and highly pressurized clean water is sprayed to remove the oil and dirt remaining on machined engine and transmission blocks. Although this valve system has been widely used because of its competitive price, its application is sometimes restricted by surging effects, such as pressure ripples occurring in rapid changes in water flow caused by inaccurate valve control. As an alternative, one three-way reversing valve can replace the valve system because it provides rapid and accurate changes to the water flow direction without any precise control device. However, a cavitation effect occurs because of the complicated bottom plug shape of the valve. In this study, the cavitation index and percent of cavitation (POC) were introduced to numerically evaluate fluid flows via computational fluid dynamics (CFD) analysis. To reduce the cavitation effect generated by the bottom plug, the optimal shape design was carried out through a parametric study, in which a simple computer-aided engineering (CAE) model was applied to avoid time-consuming CFD analysis and difficulties in achieving convergence. The optimal shape design process using full factorial design of experiments (DOEs) and an artificial neural network meta-model yielded the optimal waist and tail length of the bottom plug with a POC value of less than 30%, which meets the requirement of no cavitation occurrence. The optimal waist length, tail length and POC value were found to 6.42 mm, 6.96 mm and 27%, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.2
• /
• pp.155-160
• /
• 1984

This study was conducted to find out the effects of soil physical properties on workability of farm machines in the paddy fields. Various soil physical properties, workability of cultivator and tractor were investigated at three different textured soils and three levels of soil moisture conditions. The results are summarized as follows: 1. Soil strength, shear and friction resistance, plate sinkage, wheel and footprint sinkage, and slippage were greatly affected by the soil texture and moisture conditions, and the workabilities were changed by the soil physical properties. 2. Cultivator workability were high values at the range of soil shear resistance $200-450g/cm^2$, and cultivator or tractor working was difficult at below $200g/cm^2$ of the shear resistance. 3. The favorable range of soil strength for tractor working was $8-12kg/cm^2$, and $6-10kg/cm^2$ for cultivator. 4. Footprint sinkage was closely related to the values obtained by testers. It's optimum range for cultivator was 1-2cm, and tractor workability was increased by decreasing the footprint sinkage.

• Radiation Oncology Journal
• /
• v.17 no.2
• /
• pp.172-178
• /
• 1999

Purpose : To measure the basic structural characteristics of radiation oncology facilities in Korea during 1997 and to compare personnel, equipments and patient loads between Korea and developed countries. Methods and Materials : Mail serveys we conducted in 1998 and data on treatment machines, personnel and peformed new patients were collected. Responses were obtained from the 100 percent of facilities. The consensus data of the whole country were summarized using Microsoft Excel program. Results: In Korea during 1997, 42 facilities delivered megavoltage radiation theraphy with 71 treatment machines, 100 radiation oncologists, 26 medical physicist, 205 technologists and 19,773 new patients. Eighty nine percent of facilities in Korea had linear accelators at least 6 MeV maximum photon energy. Ninety five percent of facilities had simulators while five percent of facilities had no simulator, Ninety one percent of facilities had computer planning systems and eighty three percent of facilities reported that they had a written quality assurance program. Thirty six percent of facilities had only one radiation oncologist and thirty eight percent of facilities had no medical physicists. The median of the distribution of annual patients load of a facility, patients load per a machine, patients load per a radiation oncologist, patients load per a therapist and therapists per a machine in Korea were 348 patients per a year, 263 patients per a machine, 171 patients per a radiation oncologist, 81 patients per a therapist, and 3 therapists per a machine respectively. Conclusions : The whole scale of the radiation oncology departments in Korea was smaller than Japan and USA in population ratio regard. In case of hardware level like linear accelerators, simulators and computer planning systems, there was no big differences between Korea and USA. The patients loads of radiation oncologists and therapists had no significant differences as compared with USA. However, it was desirable to consider the part time system in USA because there were a lot of hospitals which did not employ medical physicists.

• Food Science and Preservation
• /
• v.24 no.2
• /
• pp.230-236
• /
• 2017

This study was carried out to investigate the effects of ultrasonic thawing on physicochemical characteristics of frozen pork sirloin. To determine the velocity of an ultrasonic thawing machine, $-80^{\circ}C$ frozen pork sirloins were thawed using 132, 580, and 1,000 kHz ultrasonic thawing machines, and the physicochemical properties of pork sirloin thawed with $15^{\circ}C$ tap water and those using the ultrasonic thawing machines were compared. As a result, thawing speed by ultrasonic thawing was three times faster than that of tap water, but drip weight loss rate is increased by about 5% during ultrasonic thawing compared to that during thawing in tap water. However, biochemical properties, such as pH, volatile basic nitrogen, thiobarbituric acid, and total aerobic bacteria, were not improved by ultrasonic thawing. Hunter values, such as total color change and redness, improved slightly after 580 kHz ultrasonic thawing. The hardness and chewiness of the pork sirloin decreased significantly after 580 kHz ultrasonic thawing; however, springiness was not changed. These results indicate that ultrasonic thawing is faster than thawing in tap water, but the physicochemical characteristics of frozen pork sirloin was not significantly improve by ultrasonic sound.

• Weed & Turfgrass Science
• /
• v.2 no.1
• /
• pp.23-29
• /
• 2013

This study was conducted to clarify effects of weed control methods on damages from agricultural chemicals of pear trees, growth of weeds and states of pear trees after treating pear orchards with different methods of weed controlling, density of GLU and application times. The growth and occupation rate were investigated after 10, 20 and 40 days of weeding treatment. According to a result of the first treatment conducted when weeds in the lower parts of crown in a pear orchard began to grow and grew about 20 cm, unwoven cloth covering showed the highest control value with 100% in all 14 kinds of grasses. In comparison, Stellaria aquatica and catchweed bedstraw showed 96.7% and 97.3% respectively in the 20 DAT investigate after the first treatment of GLU 540 g a.i. ha-1 and the high control value of 100% in other all kinds of grasses. According to an investigation of stalk enlargement, length of new shoot and the number of new shoot made to know differences in tree growth following treatment of the lower part of crown, to use weed killers two or three times a year or to eliminate grasses with machines have positive effects on cross growth of pear trees.

• Korean Journal of Veterinary Research
• /
• v.21 no.2
• /
• pp.151-159
• /
• 1981

An investigation on various causes of milking disturbances resulting from injuries and abnormalities of mammary system were made in 2,179 Holstein cows. To perform this investigation, 69 dairy farms of the suburban area of Seoul city, Gyeonggi-do and Chungnam provinces were andomly selected and subjected. Diagnosis was made by means of inspection and palpation of teat, insertion of teat canula, checking milk machines, anamneses and farm records. This investigation was, actively done from March 1977 to February 1979, The results obtained were summerized as follows; 1. It was found that 446 cows, accounting for 20.48% of 2,179 cows inspected, had supernumerary teats. Among them 53.59% had one, 43.72% had two, 2.47% had three, and 0.22% had four supernumerary teats, respectively. 2. Dry off quarters were found in 158 quarters which turned out to be 1.8% of 8,716 quarters inspected. Among dry off quarters, 62.02% seemed to be caused by mastitis, 30.37% by acquired teat obstructions, and 7.59% by congenital blind teats and glands respectively. 3. Teat sphincter stenosis was found in 154 teats of 50 cows, which represents 1.76% of 8,716 teats and 2.29% of 2,179 cows inspected, respectively. Among 154 teats with teat sphincter stenosis, 138 teats (85.7%) of 33 cows were found to be congenital and revealed highest incidence. 4. Loose sphincter was found in 78 teats of 36 cows, which figure 0.89% of 8,7l6 teats and 1.69% of 2,179 cows inspected, respectively. Among 78 teats with loose sphincter, 52 teats (66.66%) of 13 cows were found to be congenital and revealed highest incidence. 5. Injured teat tip caused by over milking of milk machine, was found in 229 teats of 156 cows, which figure 2.63% of 8,716 teats and 7.15% of 2,179 cows observed, respectively. 6. Other miscellaneous injuries and congenital abnormalities of teats and udders were diagnosed as follows: The teat laceration was found in 34 teats (0.39% of 8,716 teats), fissure of teat skin in 24 teats (0.28% of 8,716 teats), stricture of teat cistern in 21 teats (0.24% of 8,716 teats), teat fistula in 12 teats (0.14% of 8,716 teats), papillomas on testes in 8 teats (0.09% of 8,716 teats). Knothole orifice in 7 teats (0.08% of 8,716 teats), subcutaneous abscess of udder in 5 quarters (0.05% of 8,716 teats), membraneous obstruction of teat cistern in 4 teats (0.05% of 8,716 teats), and congenital short teat in 8 teats (0.09% of 8,716 teats), respectively.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.124-137
• /
• 2020

The need for customized products has also been increasing as more active consumers consume according to their values in recent years. Accordingly, fashion customizing web is becoming popular, but because custom freedom is low, we want to increase custom freedom by applying knitwear. To this end, a theoretical review was conducted through prior research and literature research on customization, knit design, and GUI, and based on this, a case analysis was conducted focusing on knit-making programs and fashion customizing web. Knit designs have more considerations than other fashion design process, resulting in more UIs, so users should use visual elements that are easily recognizable. Therefore, a draft assessment item was derived based on the preceding survey and three Delphi surveys were conducted on experts based on the draft. Each item was modified and deleted during the Delphi research process to produce the Custom Knitware Web GUI Design Guide. Through this study, we were able to identify the need for intuitive understanding and application of knit custom functions in GUI design of custom knitwear web. Through this research, it is expected that this data will be used to improve the usability of custom knitwear websites and to refer to knit design fields that utilize knit machines.