• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2653-2655
• /
• 1999

A technique to suppress the low frequency ripple voltage of the DC output voltage in three-phase buck diode rectifiers is presented. A pulse frequency modulation method is employed to regulate the output voltage of the rectifier and guarantee zero-current switching of the switch over the wide operating range. The pulse frequency control method used in this paper shows generally good performance such as low THD of the input line current and unity power factor. In addition, the pulse frequency method can be effectively used to suppress the low frequency voltage ripple appeared in the dc output voltage. The proposed technique illustrates its validity and effectiveness through the respective simulations and experiments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1125-1128
• /
• 2004

This paper presents the temperature characteristics with structure of 18 kV lightning arresters for distribution. Three types of polymer arresters were fabricated and ceramic type arrester was also ready to investigate. Below $100^{\circ}C$, three types of polymer arresters exhibited almost the same leakage current value, but above $100^{\circ}C$, polymer arrester that arrester module was injected into polymer housing with grease exhibited the highest leakage current and the arrester with the lowest leakage current was the arrester that silicon rubber was directly injected to arrester module. The rising of leakage current of polymer arrester with grease was because of existing grease between FRP winding and silicon housing, and reducing the insulation characteristics of the grease. All polymer arresters exhibited the same temperature characteristics but ceramic typr arrester was slower than polymer arrester in heat emission despite lowest leakage current. It was thought that the air layer between ZnO varistor blocks and ceramic housing prevented the heat emission. However, in spite of the difference of the structure, the variation of the surface temperature of all arresters exhibited the same result.

• Journal of The Korean Astronomical Society
• /
• v.44 no.3
• /
• pp.81-87
• /
• 2011

We carry out 100-GHz band test observations with the newly-constructed KVN 21-m radio telescopes in order to evaluate their performance. The three telescopes have similar performance parameters. The pointing accuracies are about 4" rms for the entire sky. The main beam sizes are about 30" (FWHMs), which is nearly the diffraction limit of the telescopes at the observing frequency (97 GHz). The measured aperture and main-beam efficiencies are about 52% and 46%, respectively, for all three telescopes. The estimated moon efficiency is ~84% for the KVN Tamna telescope. The first sidelobes appear 50" (~1.6${\times}$FWHM) from the main beam centers and the levels are on average -14 dB.

• The Journal of Internal Korean Medicine
• /
• v.36 no.4
• /
• pp.447-457
• /
• 2015

Objectives: This study was undertaken to investigate how Cortex Phellodendri affects metabolic functional change in an experimental rat model of obesity.Methods: An obesity model was induced in a C57BL/6 mouse with a high-fat diet. Mice were divided into three groups (n=6) of normal diet, high-fat diet (=control), and high-fat diet with Cortex Phellodendri. After 12 weeks, we measured the three mice groups’ body weight, FBG, FBI, HOMA-IR, OGTT, the weight of epididymal fat and liver, the percentage of ATM, and the gene expression of TNF-α, IL-10, and CD68.Results: Cortex Phellodendri significantly reduced blood glucose and oral glucose tolerance levels. It also reduced ATM numbers and TNF-α and CD68 gene expression and increased IL-10 gene expression.Conclusions: This study suggests that Cortex Phellodendri normalized the blood glucose and reduced the expression of inflammatory markers. However, with respect to other indicators of metabolic function in obesity, there were no significant results.

• Advances in pediatric surgery
• /
• v.6 no.2
• /
• pp.124-127
• /
• 2000

Femoral hernia is very rare in children and is easily misdiagnosed. During a period of three years, three children with femoral hernia were treated by one pediatric surgeon at Severance Hospital. Only one case was diagnosed correctly before surgery, and the others were thought to be either an indirect inguinal hernia or groin mass. Curative hernioplasty (McVay hernioplasty) could be done in only one case at the time of first operation. Diagnosis of femoral hernia in children is a challenge because of rarity and similarity of clinical presentation to indirect inguinal hernia. Co-incidental findings of indirect inguinal hernia sac or patent processus vaginalis during surgery can perpetuate the misdiagnosis. In case of absence of expected indirect inguinal hernia or apparent recurrence of indirect inguinal hernia, one should consider the possibility of femoral hernia.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.3
• /
• pp.123-131
• /
• 2007

The buckling behavior of a fiber reinforced plastic pipe was researched. When a cylindrical structure is made of isotropic material, it shows two dimensional buckled shape which has same deformed section along the longitudinal direction. But an anisotropic cylindrical structure shows three dimensional buckled shape which has different deformed section along the longitudinal direction. Because the modulus of elasticity is varied in a certain direction when ply angles are changed, the strength of a pipe are changed as ply angles are changed. In this study, the limitation of two dimensional and three dimensional buckling mode was investigated and the buckling strength of a laminated composite pipe was evaluated.

• Water for future
• /
• v.29 no.1
• /
• pp.163-179
• /
• 1996

Flood flow characteristics of the Han River (from Goan to Indo Bridge) are analyzed using 1-dimensional St. Venant equations. NETWORK, a finite difference model, is used to calculate each term (local acceleration term, convective acceleration term, pressure force term, gravity force term, and friction force term) of the momentum equation and to analyze the flow characteristics. By the result of the study, as the general characteristics of flow in a channel that acceleration terms are very small and the other three terms are much greater is presented, three terms(pressure force term, gravity force term, friction force term) are to be main terms which decide the characteristics of flow. Specially in this region the acceleration term is noted so large that it cannot be ignored according to the shape of hydrograph and the region.

• Journal of Marine Bioscience and Biotechnology
• /
• v.13 no.1
• /
• pp.58-65
• /
• 2021

In 2012, fishes caught by three-side fyke net in the coastal waters of Jedo were assessed for species composition and seasonal fluctuation in their abundance. The fish were caught at two research stations (St.) and were found to comprise 53 species, 39 families, and 9 orders. The dominant species were Takifugu niphobles, Lateolabrax maculatus, and Acanthopagrus schlegelii. To gain a measure of their biodiversity, all the species were assessed for their number, richness, diversity, evenness, and dominance. The highest and lowest number of total caught fish individuals was recorded in summer and winter, respectively. The diversity index was the highest in summer and lowest in winter. The evenness index was the highest in summer and lowest in spring. The richness index was highest in summer and lowest in winter. Furthermore, the dominance index was highest in spring and lowest in autumn.

• Journal of Korean Physical Therapy Science
• /
• v.30 no.1
• /
• pp.52-61
• /
• 2023

Background: The purpose of this study was to investigate the immediate effects of ankle elastic and non-elastic taping on postural balance and gait ability in subject with stroke. Design: Cross-sectional study Methods: Twenty-seven subjects with stroke participated in this study. The subjects performed to stand quietly for 30s on the balance platform and walking test with three different ankle taping conditions. The sway length, sway area and sway velocity of center of gravity (COG) displacement was measured to assess the postural balance and the timed up and go test, 10m walking test, 6 minutes walking test was measured to assess the gait ability. Repeated measured ANOVA was used to compare the postural balance parameters and gait ability according to three different ankle taping conditions. Results: Postural balance with non-elastic ankle taping was significantly improved compared to no ankle taping and elastic ankle taping condition(p<0.05). On the other hand, gait ability with elastic ankle taping was significantly increased compared to no ankle taping and non-elastic ankle taping condition(p<0.05). Conclusion: These findings suggest that an elastic ankle taping could effect to improve the gait ability, whereas a non-elastic ankle taping could effect to improve the postural balance in subject with stroke.

• Geomechanics and Engineering
• /
• v.34 no.1
• /
• pp.29-41
• /
• 2023

The 3D geospatial modeling of geotechnical information can aid in understanding the geotechnical characteristic values of the continuous subsurface at construction sites. In this study, a geostatistical optimization model for the three-dimensional (3D) mapping of subsurface stratification and the SPT-N value based on a trial-and-error rule was developed and applied to a dam emergency spillway site in South Korea. Geospatial database development for a geotechnical investigation, reconstitution of the target grid volume, and detection of outliers in the borehole dataset were implemented prior to the 3D modeling. For the site-specific subsurface stratification of the engineering geo-layer, we developed an integration method for the borehole and geophysical survey datasets based on the geostatistical optimization procedure of ordinary kriging and sequential Gaussian simulation (SGS) by comparing their cross-validation-based prediction residuals. We also developed an optimization technique based on SGS for estimating the 3D geometry of the SPT-N value. This method involves quantitatively testing the reliability of SGS and selecting the realizations with a high estimation accuracy. Boring tests were performed for validation, and the proposed method yielded more accurate prediction results and reproduced the spatial distribution of geotechnical information more effectively than the conventional geostatistical approach.