• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.66-72
• /
• 1999

A numerical simulation method has been under development for solving turbulent flows around a ship model in maneuvering motion using the Reynolds Averaged Navier-Stokes equations. The method used second-order finite differences, collocated grids, pressure-Poisson equation and four-stage Runge-Kutta scheme as key components of the solution method. A modified Baldwin-Lomax model is used for the turbulence closure. This paper presents a preliminary result of the computational study on turbulent flows past a ship model in drift motion. Calculations are carried out for a Series 60 $C_B=0.6$ ship model, for which detailed experimental data are available. The results of the present calculations are compared with the experimental data for hydrodynamic forces acting on the model as well as velocity distributions at longitudinal sections. Only fair agreements has been achieved. The computational results show the complex asymmetrical shear flow patterns including three-dimensional separations followed by formation of bilge vortices both in bow and stern regions.

• 한국해양학회지
• /
• 제20권1호
• /
• pp.56-73
• /
• 1985

黃海 및 東支那海의 三次元 水動力學的 數値모델이 기보고된 主太陰半日週潮 (M2)의 潮流分布(崔, 1984)에 附加하여 S$_{2}$, $K_{1}$, 및 $O_{1}$ 分潮의 水深에 따른 潮流分布를 算定하는데 利用되었다. 모델 結果는 近年의 美.中共 共同 海洋觀測 프로그램의 潮流觀測値( Larsem과 Cannon, 1983)와 比較檢討되었으며 또 한 S$_{2}$, $K_{1}$ 및 $O_{1}$ 分潮의 表層, 中間水深, 海底에서의 潮流 調和 常數 分布圖 및 潮流 圓圖로서 提示되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.96-100
• /
• 2008

In this paper, a experimental and theoretical study is carried out on the hydroelastic vibration for a rectangular bottom and side plate of tank. It is assumed that the tank wall is clamped along the plate edges. The fluid velocity potential is used for the simulation of fluid domain and to obtain the added mass due to plate vibration. It is assumed that the fluid is imcompressible and inviscid. Assumed mode method is utilized to the plate model and hydrodynamic force is obtained by the proposed approach. The coupled natural frequencies are obtained from the relationship between kinetic energies of a wall including fluid and the potential energy of the wall. The theoretical result is compared with the three-dimensional finite element method. In order to verify the result, modal test was carried out for bottom/side plate of tank model by using impact hammer. It was found the fundamental natural frequency of bottom plate is lower than that of side plate of tank and theoretical result was in good agreement with that of commercial three-dimensional finite element program.

• 한국해안해양공학회지
• /
• 제6권2호
• /
• pp.174-185
• /
• 1994

본 논문에서는 수평유속의 연직방향 변화 결정에 유한요소기법(FEM)을 이용하고 수평방향으로는 유한차분기법을 사용하는 복합형 Galerkin 연직함수 전개모델에 새로이 유사변환기법을 추가한 3차원 해수유동모델의 개발에 대하여 기술하였다. 기본방정식의 연직방향으로 선형보간함수를 기저함수로 사용하여 Galerkin 기법을 적용하여 구성되는 행열 방정식에 유사변환기법을 적용, 각 절점의 유속값을 해석적으로 구하였다. 유사변환기법을 적용하여 최종 얻어지는 모우드 shape 방정식은 비연계된 방정식으로 구성되므로 역행렬 계산이 필요없어 계산시간이 절약된다. 또한 수립된 모델은 고유벡터행렬로 구성되는 모우드 shape가 도입됨으로써 모우드 shape 몇개만 사용하여도 거의 수렴된 값을 얻을 수 있어 계산시간을 절약할 수 있다. 등수심하 유한영역과 무한영역에서의 수치실험을 통하여 개발된 모델의 적용 가능성을 검증하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.237.2-237.2
• /
• 2010

Although oscillating water column type wave energy devices are nearing the stage of commercial exploitation, there is still much to be learnt about many facets of their hydrodynamic performance. The techniques of Computational Fluid Dynamics (CFD) are applied to simulate a wave energy conversion device in free surface such as waves. This research uses the commercially available ANSYS CFX computational fluid dynamics flow solver to model a complete oscillating water column system with savonius turbine incorporated at the rear bottom of the OWC chamber in a three dimensional numerical wave tank. The purpose of the present study is to investigate the effect of an average wave condition on the performance and internal flow of a newly developed direct drive turbine (DDT) model for wave energy conversion numerically. The effects of blade angle and front lip shape on the hydrodynamic efficiency are investigated. The results indicated that the developed models are suitable to analyze the water flow characteristics both in the chamber and in the turbine. For the turbine, the numerical results of torque were compared for the all cases. The results of the testing have also illustrated that simple changes to the front wall aperture shape can provide marked improvements in the efficiency of energy capture for OWC type devices.

• 한국환경과학회지
• /
• 제14권9호
• /
• pp.835-842
• /
• 2005

The three-dimensional eco-hydrodynamic model was applied to estimate the physical process in terms of COD (chemical oxygen demand) and net supply(or decomposition) rate of COD in Kamak Bay to find proper management plan for oxygen demanding organic matters. The estimation results of the physical process in terms of COD showed that transportation of COD is dominant in surface level while accumulation of COD is dominant in bottom level. In the case of surface level, the net supply rate of COD was 0 -0.50 mg/m2/day. The net decomposition rate of COD was 0 -0.04 mg/m2/day in middle level(3 -6m) and 0.05 -0.1 5 mg/m2/day in bottom level(6m -bottom). These results indicates that the biological decomposition and physical accumulation of COD are occurred predominantly at the northern part of bottom level. Therefore, it is important to consider both allochthonous and autochthonous oxygen demanding organic matters in the region.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.1079-1083
• /
• 2010

하절기에 집중되는 강우로 인해 국내의 경우 저수지와 댐 건설이 불가피 하였으며, 이들 구조물에 의한 수체의 거동 및 수질의 분포 또한 일반 하천과는 다른 특성을 지니고 있다. 특히, 흐름 방향보다 수심 방향으로의 특성이 강하게 작용하는 호소에서는 3차원 수리 수질 모델링을 적용함으로써 모의 결과에 대한 신뢰성을 높일 수 있다. 하천의 발원지로서의 댐(저수지)과 하천과 하천사이에 위치한 저수지의 특성이 다르며, 하천 사이에 위치한 저수지의 경우, 하천과 하천을 이어주며 그 흐름특성과 수질의 분포 및 변화의 양상의 바뀐다는 점에서 독립적이며, 연계되는 구조의 특징을 동시에 반영할 수 있어야 한다. 본 논문에서는 낙동강에 위치한 남강댐(진양호)를 중심으로 연구를 진행하였으며, 안동댐 등처럼 하천의 발원지가 아닌 하천과 하천 사이에 위치한 호소(댐)으로 이와 같은 특징을 반영하여 수질오염총량관리제에서의 목표수질 달성여부와 점 및 비점오염원에서 발생되는 오염부하량의 변화에 따른 저수지 내의 수리 수질 모의를 EFDC-WASP의 연계 모델을 통해 연구하고자 하였다.

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.86-95
• /
• 2008

For analyses of multi-phase flows in a water-cooled nuclear power plant, a three-dimensional SIMPLE-algorithm based hydrodynamic solver CUPID-S has been developed. As governing equations, it adopts a two-fluid three-field model for the two-phase flows. The three fields represent a continuous liquid, a dispersed droplets, and a vapour field. The governing equations are discretized by a finite volume method on an unstructured grid to handle the geometrical complexity of the nuclear reactors. The phasic momentum equations are coupled and solved with a sparse block Gauss-Seidel matrix solver to increase a numerical stability. The pressure correction equation derived by summing the phasic volume fraction equations is applied on the unstructured mesh in the context of a cell-centered co-located scheme. This paper presents the numerical method and the preliminary results of the calculations.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.71-78
• /
• 2008

For analyses of multi-phase flows in a water-cooled nuclear power plant, a three-dimensional SIMPLE-algorithm based hydrodynamic solver CUPID-S has been developed. As governing equations, it adopts a two-fluid three-field model for the two-phase flows. The three fields represent a continuous liquid, a dispersed droplets, and a vapour field. The governing equations are discretized by a finite volume method on an unstructured grid to handle the geometrical complexity of the nuclear reactors. The phasic momentum equations are coupled and solved with a sparse block Gauss-Seidel matrix solver to increase a numerical stability. The pressure correction equation derived by summing the phasic volume fraction equations is applied on the unstructured mesh in the context of a cell-centered co-located scheme. This paper presents the numerical method and the preliminary results of the calculations.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.71-78
• /
• 2008

For analyses of multi-phase flows in a water-cooled nuclear power plant, a three-dimensional SIMPLE-algorithm based hydrodynamic solver CUPID-S has been developed. As governing equations, it adopts a two-fluid three-field model for the two-phase flows. The three fields represent a continuous liquid, a dispersed droplets, and a vapour field. The governing equations are discretized by a finite volume method on an unstructured grid to handle the geometrical complexity of the nuclear reactors. The phasic momentum equations are coupled and solved with a sparse block Gauss-Seidel matrix solver to increase a numerical stability. The pressure correction equation derived by summing the phasic volume fraction equations is applied on the unstructured mesh in the context of a cell-centered co-located scheme. This paper presents the numerical method and the preliminary results of the calculations.