• 제목/요약/키워드: Three Dimensional Crack

검색결과 260건 처리시간 0.023초

전단응력하의 분산형 복합재료에 미시역학적인 특성평가 (Analysis for Properties of Particle or Short Fiber Reinforced Composites based on Micromechanics under Pure Shear)

  • 조영태;임광희
    • Composites Research
    • /
    • 제15권3호
    • /
    • pp.11-17
    • /
    • 2002
  • 본 연구에서는 분산형 강화복합재료에 균열이 발생하면 하중부하능력이 감소와 더불어 재료의 손상을 초래할 수 있어 재료의 완전한 게재물과 균열이 존재한 게재물이 있는 경우를 상정하여 하중부하능력과 탄성 음력분포를 평가한다. 무한체가 전단음력을 받을 때 완전한 게재물과 균열이 내재한 경우에 대하여 3차원 유한요소해석이 수행되어 완전한 게재물의 경우는 게재물의 영역의 음력은 동일하고 게재물의 계면은 다소 불균일하게 나타났다. 그리고 균열이 내재한 경우에는 균열주변에는 음력이 집중되는 경우를 볼수 있을 뿐만아니라 아주 복잡한 분포를 볼수 있었다. 불균질물의 평균응력은 하중부하능력으로 표현이 가능하였고 완전만 게재물과 균열의 경우도 균열손상에 의해 하중부하능력의 차이를 볼 수 있었다. 특히, 균열이 내재한 경우에 에스펙터비(aspect ratio)가 증가할수록 하중부하능력이 증가함을 알 수 있었다.

A Study on the Profile Change Measurement of Steam Generator Tubes with Tube Expansion Methods

  • Kim, Young-Kyu;Song, Myung-Ho;Choi, Myung-Sik
    • 비파괴검사학회지
    • /
    • 제31권5호
    • /
    • pp.543-551
    • /
    • 2011
  • Steam generator tubes for nuclear power plants contain the local shape transitions on their inner or outer surface such as dent, bulge, over-expansion, eccentricity, deflection, and so on by the application of physical force during the tube manufacturing and steam generator assembling and by the sludge (that is, corrosion products) produced during the plant operation. The structural integrity of tubes will be degraded by generating the corrosive crack at that location. The profilometry using the traditional bobbin probes which are currently applied for measuring the profile change of tubes gives us basic information such as axial locations and average magnitudes of deformations. However, the three-dimensional quantitative evaluation on circumferential locations, distributional angle, and size of deformations will have to be conducted to understand the effects of residual stresses increased by local deformations on corrosive cracking of tubes. Steam generator tubes of Korean standard nuclear power plants expanded within their tube-sheets by the explosive expansion method and suffered from corrosive cracks in the early stage of power operation. Thus, local deformations of steam generator tubes at the top of tube-sheet were measured with an advanced rotating probe and a laser profiling system for the two cases where the tubes expanded by the explosive expansion method and hydraulic expansion. Also, the trends of eccentricity, deflection, and over-expansion of tubes were evaluated. The advanced eddy current profilometry was confirmed to provide accurate information of local deformations compared with laser profilometry.

Numerical modeling and prediction of adhesion failure of adhesively bonded composite T-Joint structure

  • Panda, Subhransu K;Mishra, Pradeep K;Panda, Subrata K
    • Structural Engineering and Mechanics
    • /
    • 제74권6호
    • /
    • pp.723-735
    • /
    • 2020
  • This study is reported the adhesion failure in adhesive bonded composite and specifically for the T-joint structure. Three-dimensional finite element analysis has been performed using a commercial tool and the necessary outcomes are obtained via an eight noded solid element (Solid 185-element) from the library of ANSYS. The structural analysis input has been incurred through ANSYS parametric design language (APDL) code. The normal and shear stress distributions along different layers of the joint structure have been evaluated as the final outcomes. Based on the stress distributions, failure location in the composite joint structure has been identified by using the Tsai-Wu stress failure criterion. It has been found that the failure index is maximum at the interface between flange and web part of the joint (top layer) which indicates the probable location of failure initiation. This kind of failures are considered as adhesion failure and the failure propagation is governed by strain energy release rate (SERR) of fracture mechanics. The different adhesion failure lengths are also considered at the failure location to calculate the SERR values i.e. mode I fracture (opening), mode II fracture (sliding) and mode III fracture (tearing) along the failure front. Also, virtual crack closure technique (VCCT) principle of fracture mechanics steps is used to calculate the above said SERRs. It is found that the mode I SERR is more dominating compared to other two modes of failure for the joint considered. Finally, the influences of various parametric (geometrical and material) effect on SERR of the joint structure are evaluated and discussed in details.

Nonlinear analysis of reinforced concrete beams strengthened with polymer composites

  • Pendhari, S.S.;Kant, T.;Desai, Y.M.
    • Structural Engineering and Mechanics
    • /
    • 제24권1호
    • /
    • pp.1-18
    • /
    • 2006
  • Strengthening of existing old structures has traditionally been accomplished by using conventional materials and techniques, viz., externally bonded steel plates, steel or concrete jackets, etc. Alternatively, fibre reinforced polymer composite (FRPC) products started being used to overcome problems associated with conventional materials in the mid 1950s because of their favourable engineering properties. Effectiveness of FRPC materials has been demonstrated through extensive experimental research throughout the world in the last two decades. However there is a need to use refined analytical tools to simulate response of strengthened system. In this paper, an attempt has been made to develop a numerical model of strengthened reinforced concrete (RC) beams with FRPC laminates. Material models for RC beams strengthened with FRPC laminates are described and verified through a nonlinear finite element (FE) commercial code, with the help of available experimental data. Three dimensional (3D) FE analysis has been performed by assuming perfect bonding between concrete and FRPC laminate. A parametric study has also been performed to examine effects of various parameters like fibre type, stirrup's spacing, etc. on the strengthening system. Through numerical simulation, it has been shown that it is possible to predict accurately the flexural response of RC beams strengthened with FRPC laminates by selecting an appropriate material constitutive model. Comparisons are made between the available experimental results in literature and FE analysis results obtained by the present investigators using load-deflection and load-strain plots as well as ultimate load of the strengthened beams. Furthermore, evaluation of crack patterns from FE analysis and experimental failure modes are discussed at the end.

최적 시험체 형상을 고려한 개선된 콘크리트 등방휨인장강도 시험법 (Improved Biaxial Flexure Test (BFT) for Concrete with the Optimum Specimen Geometry)

  • 지광습;김지환;오홍섭
    • 콘크리트학회논문집
    • /
    • 제21권4호
    • /
    • pp.523-530
    • /
    • 2009
  • 콘크리트를 설계하기 위해 설계자는 설계의 효율성을 위하여 일축휨강도에 기초한 설계를 하고 있지만, 포 장체 및 바닥판과 같은 실제 구조요소의 응력상태는 재료전반에 작용하는 이축응력이 발생하게 된다. 따라서 콘크리트 의 이축휨시험은 사용하중상태에서 콘크리트의 거동을 평가할 수 있는 중요한 설계인자로서 사용될 수 있다. 이 연구 에서 저자들은 콘크리트 이축휨강도를 평가할 수 있는 BFT 시험법의 최적 구성을 제안하였다. 이 기법은 세라믹 또는 바이오 재료 분야에서 사용되어온 링온링 시험법을 콘크리트 재료에 적합하도록 수정, 제시한 것이다. 이를 위하여 유 한요소해석과 정밀해에 대한 분석을 통하여 시험체의 형상과 시험법을 제시하였다. 제안된 방법에 의한 실험 결과, 이 축휨실험을 통하여 콘크리트 재료의 휨강도를 충분히 판정할 수 있는 것을 증명할 수 있었다.

신뢰성(信賴性) 이론(理論)에 기초(基礎)한 철근(鐵筋)콘크리트 원통-쉘 차폐(遮蔽) 구조물(構造物)의 설계하중(設計荷重) 조합(組合) 규준(規準) (Reliability Based Load Combination Criteria for Design of Reinforced Concrete Cylindric-ShellContainment Structures)

  • 한봉구
    • 대한토목학회논문집
    • /
    • 제13권2호
    • /
    • pp.21-29
    • /
    • 1993
  • 본 연구에서는 구조물의 사용성 한계상태와 유한요소 해석 결과를 기초한 랜덤 진동 이론에 의한 확률적 신뢰성 해석 방법에 대해 연구하였다. 한계상태 모형은 보다 실제적인 방사능 누출 한계 균열에 대한 사용성 한계상태로 정의하여 연구하였다. 차폐구조물은 SAP V-2를 이용하여 3차원 유한요소 해석을 하였으며, 본 연구에 적합하게 수정 개발한 HRAS 신뢰성 프로그램으로 신뢰성 해석을 수행하였다. 본 연구에서는 하중조합 설계규준 보정 기법을 이용하여 국내의 철근콘크리트 차폐 구조물에 적합한 하중계수를 제안하였으며, 현행 ASME 규준과 비교하였다. 제안한 하중계수는 시방서 목적과 잘 일치하며, 한계상태 확률이 일관성 있음을 입증하였다.

  • PDF

TiNi/A16061 형상기억복합재료의 미시적 손상거동과 손상위치측정에 관한 연구 (A Study on the Microscopic Damage Behavior and the Damage Position Evaluation of TiNi/Al6061 Share Memory Alloy Composite)

  • 이진경;박영철;구후택;이규창
    • 대한기계학회논문집A
    • /
    • 제26권9호
    • /
    • pp.1787-1794
    • /
    • 2002
  • TiNi alloy fiber was used to solve the problem of the tensile residual stress as the reinforced material. TiNi alloy fiber improves the tensile strength of composite by occurring compressive residual stress in the matrix using shape memory effect. In order to generate compressive residual stress in TiNi/Al6061 shape memory alloy(SMA) composite, 1, 3 and 5% pre-strains were applied to the composite in advance. It was also evaluated the effect of compressive residual stress corresponding to the pre-strain variation and the volume fraction of TiNi alloy. AE technique was used to clarify the microscopic damage behavior at high temperature and the effect of pre-strain in TiNi/Al6061 SMA composite. The results of the microscopic damage evaluation of TiNi/Al6061 SMA composite under various pre-strain using AE technique can be divided into three stage corresponding to the AE signals. AE counts and events were useful parameters to evaluate the fracture mechanism according to the variation of pre-strain. In addition, two dimensional AE source location technique was applied for monitoring the crack initiation and propagation in composite.

접착식 콘크리트 덧씌우기 포장의 부착거동 연구 (A Study on the Bond-Behavior of Bonded Concrete Overlays)

  • 김영규;이승우;한승환
    • 한국도로학회논문집
    • /
    • 제14권5호
    • /
    • pp.31-45
    • /
    • 2012
  • PURPOSES: In Korea, rapid maintenance of distressed concrete pavement is required to prevent traffic jam of the highway. Asphalt concrete overlay has been used as a general maintenance method of construction for aged concrete pavement. AC overlay on existing concrete pavements experience various early distresses such as reflection crack, pothole and rutting, due to different physical characteristics between asphalt overlay and existing concrete pavement. Bonded concrete overlay(BCO) is a good alternative since it has advantages that can reduce various distresses during the service life since overlay material has similar properties with existing concrete pavements. Recently, BCO which uses the ultra rapid harding cement has been applied for maintenance of highway. BCO has advantage of structural performance since it does monolithic behave with existing pavement. Therefore, it is important to have a suitable bond strength criteria for securing performance of BCO. Bond strength criteria should be larger than normal tensile stress and horizontal shear stress occurred by traffic and environmental loading at bond interface. Normal tensile stress and horizontal shear stress need to estimated for the establishment of practical bond strength criteria. METHODS: This study aimed to estimate the bond stresses at the interface of BCO using the three dimensional finite element analysis. RESULTS: As a result of this study, major failure mode and maximum bond stress are evaluated through the analysis of normal tensile stress and horizontal shear stress for various traffic and environmental load conditions. CONCLUSIONS: It was known that normal tensile stresses are dominated by environmental loading, and, horizontal shear stresses are dominated by traffic loading. In addition, bond failure occurred by both of normal tensile stresses and horizontal shear stresses; however, normal tensile stresses are predominated over horizontal shear stresses.

횡하중을 받는 RC 무량판 구조의 슬래브 모델링 기법 (Modeling Method of Slabs in RC Flat-Plate Structures Under Lateral loading)

  • 최정욱;송진규;이수곤;김진상
    • 콘크리트학회논문집
    • /
    • 제14권4호
    • /
    • pp.615-622
    • /
    • 2002
  • 철근콘크리트 무량판 구조의 내력 및 변위를 합리적으로 예측하기 위해서는 슬래브의 휨 강성을 고려한 해석모델이 필요하다. FEMA 273과 ACI 318-99에서는 횡 하중에 대한 슬래브의 해석모델들을 제시하고 있으나 실제적인 적용 방법론은 언급하고 있지 않다. 본 연구에서는 무량판 슬래브의 모델링 방법론을 정립하고 이를 내진설계에 어떻게 적용할 것인가에 대하여 연구하였다. 연구결과는 다음과 같다. 1) 무량판 구조의 3차원 해석시 슬래브의 휨 강성을 적절히 고려하기 위해서는 본 연구진이 제시하는 유효보폭 모델을 적용하는 것이 바람직하다. 2) 예제 무량판 건물 해석에서 슬래브의 균열효과를 고려한 유효보폭을 이용할 경우 해석결과는 횡변위에 대하여 상한값을 나타낸 반면 유효보폭 계수만을 고려한 모델은 접합부 불균형 모멘트에 대하여 상한값의 결과를 나타냈다.

Mechanical performances of concrete beams with hybrid usage of steel and FRP tension reinforcement

  • Bui, Linh V.H.;Stitmannaithum, Boonchai;Ueda, Tamon
    • Computers and Concrete
    • /
    • 제20권4호
    • /
    • pp.391-407
    • /
    • 2017
  • Fiber reinforced polymer (FRP) bars have been recently used to reinforce concrete members in flexure due to their high tensile strength and especially in corrosive environments to improve the durability of concrete structures. However, FRPs have a low modulus of elasticity and a linear elastic behavior up to rupture, thus reinforced concrete (RC) components with such materials would exhibit a less ductility in comparison with steel reinforcement at the similar members. There were several studies showed the behavior of concrete beams with the hybrid combination of steel and FRP longitudinal reinforcement by adopting the experimental and numerical programs. The current study presents a numerical and analytical investigation based on the data of previous researches. Three-dimensional (3D) finite element (FE) models of beams by using ANSYS are built and investigated. In addition, this study also discusses on the design methods for hybrid FRP-steel beams in terms of ultimate moment capacity, load-deflection response, crack width, and ductility. The effects of the reinforcement ratio, concrete compressive strength, arrangement of reinforcement, and the length of FRP bars on the mechanical performance of hybrid beams are considered as a parametric study by means of FE method. The results obtained from this study are compared and verified with the experimental and numerical data of the literature. This study provides insight into the mechanical performances of hybrid FRP-steel RC beams, builds the reliable FE models which can be used to predict the structural behavior of hybrid RC beams, offers a rational design method together with an useful database to evaluate the ductility for concrete beams with the combination of FRP and steel reinforcement, and motivates the further development in the future research by applying parametric study.