• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.05a
• /
• pp.190-196
• /
• 2004

Thick composite laminated plates is considered in 3D finite-element. To consider continuity of transverse stresses and displacement field, mixed finite-element has been developed by using layerwise theory and the minimum potential energy principle. Mixed finite-element has been enforced through the thick direction, Z, of a laminated plate by considering six degree-of-freedoms per node. Six degree-of-freedoms are three displacement components in the coordinate axes directions and three transverse stress components ${\sigma}_z,\;{\tau}_{xz},\;{\tau}_{yz}$. The model maintain the fundamental elasticity relations that are stress-strain relation and displacement-strain relation, because the transverse stress components invoked as nodal degrees of freedom by using the fundamental elasticity relationship between th components of stress and displacement. Random vibration analysis of the model is performed by computing consistent mass matrix and computing covariance in frequency domain technique.

• Journal of Internet Computing and Services
• /
• v.3 no.3
• /
• pp.75-85
• /
• 2002

Nowadays for reliable software and cost reduction there are many research works on software development based on component, One of the challenge in designing a component-based system is determining which components are required and where they fit in the overall system architecture. In this paper, we developed three EJB components, the first is for transforming XML DTD to relational database schema, the second is for storing XML document in relational database, and the third is for transforming XML document by retrieving relational database, By assembling these three components, we developed XML Repository system finally.

• Journal of the Optical Society of Korea
• /
• v.15 no.2
• /
• pp.140-145
• /
• 2011

Joint transform correlator (JTC) is a well known tool for color pattern recognition for a color image. Color images have red, green and blue components, thus in conventional JTC, three input channels of these color components are necessary for color pattern recognition. This paper proposes a new technique of color pattern recognition by decomposing the color image into three color components and recombining those components into a single gray image in the input plane. This new technique needs single input channel and single output CCD camera, thus a simple JTC can be used. We present various kinds of simulated results to show that our newly proposed technique can accurately recognize and discriminate color differences.

• International Journal of Aerospace System Engineering
• /
• v.5 no.2
• /
• pp.8-15
• /
• 2018

For small earth observation satellites, alignment between the optical components is important for precise observation. However, satellite cameras are structurally subject to misalignment in the launch environment where vibration excitations and impacts apply, and in space environments where zero gravity, vacuum, radiant heat and degassing occur. All of these variables can cause misalignment among the optical components. The misalignment among optical components results in degradation of image quality, and a re-alignment process is needed to compensate for the misalignment. This process of re-alignment between optical components is referred to as a refocusing process. In this paper, we proposed a 3 - axis focusing mechanism to perform the refocusing process. This mechanism is attached to the back of the secondary mirror and consists of three piezoelectric inertia-friction actuators to compensate the x-axis, y-axis tilt, and de-space through three-axis motion. The fabricated focus mechanism demonstrated excellent servo performance by experimenting with PD servo control.

• Nuclear Engineering and Technology
• /
• v.50 no.6
• /
• pp.971-980
• /
• 2018

Using the concept of quasi-static decomposition and using three-noded isoparametric locking-free element, this article presents a formulation of the finite element method for Timoshenko beam subjected to spatially different time-dependent motions at supports. To verify the validity of the formulation, three fixed-hinged beams excited by the real seismic motions are examined; one is a slender beam, another is a stocky one, and the other is an intermediate one. The numerical results of time histories of motions of the three beams are compared with corresponding analytical solutions. The internal loads such as bending moment and shearing force at a specific time are also compared with analytic solutions. These comparisons show good agreements. The comparisons between static components of the internal loads and the corresponding total internal loads show that the static components predominate in the stocky beam, whereas the dynamic components predominate in the slender one. Thus, the total internal loads of the stocky beam, which is governed by static components, can be predicted simply by static analysis. Careful numerical experiments indicate that the fundamental frequency of a beam can be used as a parameter identifying such a stocky beam.

• Analytical Science and Technology
• /
• v.32 no.4
• /
• pp.131-138
• /
• 2019

This paper reports results on the physical properties of a powder type of $Al_2O_3:C$ commonly used as a luminescence dosimeter using the LM-OSL technique. On the analysis with the general order kinetics model, the LM-OSL signal measured appeared to be composed of three components (fast, medium, slow) showing the largest area in the medium component. The photoionization cross sections of three components were distributed between $10^{-19}{\sim}10^{-21}cm^2$. The values of the thermal assistance energy were evaluated the largest in slow component and the smallest in fast component, which indicates the electrons trapped in defects attributed to slow component should be the most sensitive to thermal vibration among three components. In illumination to blue light, the fast component showed a rapid linear decay and completely disappeared after light exposure time of about 5 s. The medium component decayed with two exponential elements but the slow component did not observed any noticeable change until light exposure time of 40 s. In a dose response study, all components exhibited a linear behaviour up to approximately 10 Gy.

• Journal of Korean society of Dental Hygiene
• /
• v.24 no.4
• /
• pp.333-341
• /
• 2024

Objectives: This study aimed to identify the key components and tools for Comprehensive Dental Hygiene Care (CDHC) among dental hygienists and provide foundational data for widespread implementation in dental institutions. Methods: A third Delphi survey involving experts derived the CDHC components and materials. Dental hygienists' characteristics and the CDHC application status were analyzed for frequency. The perceived need for and willingness to apply the CDHC components based on general characteristics were assessed using t-tests. Results: The results of the Delphi survey identified the following CDHC components: 11 for medical history; three, dental history; five, oral hygiene practices; seven, dental conditions; three, occlusion conditions; six, periodontal conditions; and, three, other examinations. Planning included 3 items for healthy gums and 4 for gingivitis and mild periodontitis. Evaluation included 7 items for mild periodontitis, 5 for patient education, and totally 27 CDHC-related materials. Dental hygienists' needs and willingness varied, with higher levels among those in clinics, university graduates, those in counseling or managerial roles, team leaders or those at higher positions, and those with >6 years of experience (p<0.05). Conclusions: The Delphi survey identified the CDHC clinical application process, confirming the strong desire of dental hygienists to apply it in practice.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.105-111
• /
• 2003

The three-axis road simulator is the test equipment which can simulate the standardized road conditions for the durability evaluation of automotive components such as suspensions. The road load data are collected and acquired from a vehicle test, and then these data are used to simulate road load conditions by the road simulator which consists of hydraulic actuators, link mechanism and servo controller. The link mechanism must be designed in consideration of the dynamic effect and interference during three axes motions in order to generate accurate motions. In this paper, the structural and kinematic analysis of the link mechanism is performed, and these results can be used for developing the three-axis road simulator. The three-axis road simulator provides considerable savings in cost, development time, and testing risk during developing automotive components.

• Earthquakes and Structures
• /
• v.22 no.1
• /
• pp.1-13
• /
• 2022

When a building suffers damages under moderate to severe loading condition, its physical properties such as damping and stiffness parameters will change. There are different practical methods besides various numerical procedures that have successfully detected a range of these changes. Almost all the previous proposed methods used to work with translational components of mode shapes, probably because extracting these components is more common in vibrational tests. This study set out to investigate the influence of using both rotational and translational components of mode shapes, in detecting damages in 3-D steel structures elements. Three different sets of measured components of mode shapes are examined: translational, rotational, and also rotational/translational components in all joints. In order to validate our assumptions two different steel frames with three damage scenarios are considered. An iterative model updating program is developed in the MATLAB software that uses the OpenSees as its finite element analysis engine. Extensive analysis shows that employing rotational components results in more precise prediction of damage location and its intensity. Since measuring rotational components of mode shapes still is not very convenient, modal dynamic expansion technique is applied to generate rotational components from measured translational ones. The findings indicated that the developed model updating program is really efficient in damage detection even with generated data and considering noise effects. Moreover, methods which use rotational components of mode shapes can predict damage's location and its intensity more precisely than the ones which only work with translational data.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.365-368
• /
• 2004

We present a family of elaborate numerical models for simulation and systematic optimization of complex LCDs for demanding applications (e.g. LCD-TV). These numerical models comprise modules for solving LCD-related problems in one, two and three dimensions. The three modules feature an intuitive graphical user surface for a jump-start into modeling, a common database for a range of materials and components as well as sophisticated and proven algorithms with more than 15 years of reliable performance in the LCD-industry. Methods for obtaining data required for the modeling of key components are presented.