• Journal of Internet Computing and Services
• /
• v.8 no.3
• /
• pp.75-83
• /
• 2007

Multithreaded model is an effective parallel system in that it can reduce the long memory reference latency time and solve the synchronization problems. When compiling the non-strict functional programs for the multithreaded parallel machine, the most important thing is to find an set of sequentially executable instructions and to partitions them into threads. The existing partitioning algorithm partitions the condition of conditional expression, true expression and false expression into the basic blocks and apply local partitioning to these basic blocks. We can do the better partitioning if we modify the definition of the thread and allow the branching within the thread. The branching within the thread do not reduce the parallelism, do not increase the number of synchronization and do not violate the basic rule of the thread partitioning. On the contrary, it can lengthen the thread and reduce the number of synchronization. In the paper, we enhance the method of the partition of threads by combining the three basic blocks into one of two blocks.

• Transactions of Materials Processing
• /
• v.20 no.8
• /
• pp.581-587
• /
• 2011

The production of high-precision micro-sized screws, used to fasten parts of micro devices, generally utilizes a cold thread-rolling process and two flat dies to create the teeth. The process is fairly complex, involving parameters such as die shape, die alignment, and other process variables. Thus, up-front finite-element(FE) simulation is often used in the system design procedure. The final goal of this paper is to produce high-precision screw with a diameter of $800{\mu}m$ and a thread pitch of $200{\mu}m$ (M0.8${\times}$P0.2) by a cold thread rolling process. Part I is a first-stage effort, in which FE simulation is used to establish process parameters for thread rolling to produce micro-sized screws with M1.4${\times}$P0.3, which is larger than the ultimate target screw. The material hardening model was first determined through mechanical testing. Numerical simulations were then performed to find the effects of such process parameters as friction between work piece and dies, alignment between dies and material. The final shape and dimensions predicted by simulation were compared with experimental observation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.189-190
• /
• 2009

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.469-473
• /
• 2002

고성능의 인터넷과 컴퓨터의 보급은 Online Game이 개발 될 수 있는 기반을 만들었다. 또한 게임에 관련된 프로나 채널이 생길 정도의 많은 관심은 Online 게임이 급성장을 이루는데 많이 도움을 주었다. 그러나 많은 Online 게임 사용자는 서버 접속률과 진행 속도 저하의 원인된다. 그래서 접속한 많은 Client를 효과적으로 다를 수 있도록 각 게임마다의 각 특성에 맞는 Game Server의 구현을 필요로 한다. 이 논문에서는 그것의 한 방법으로 여러 개의 그룹별로 게임을 하는데 효과적인 서버를 연결 리스트와 multi-thread를 이용하여 구현하였다. Client를 효과적으로 관리하기 위하여 각 데이터를 연결 리스트로 연결하고 multi-thread 사용하여 클라이언트의 요청을 처리하였다.

• Journal of the Korean Society of Costume
• /
• v.60 no.10
• /
• pp.80-87
• /
• 2010

The purpose of this study is to develop cultural products containing Korean beauty with modern sense by applying quilting with dyed threat among Korean traditional quilting works. Quilting with dyed thread using various colored thread expresses curve, straight and oblique lines harmoniously, is mainly used to make household goods such as a pouch, a spectacle case and a quilting pocket and a circular pattern, a cross pattern and a geometric pattern are shown in this kind of quilting. As for sewing method, half backstitch and full backstitch are used, and products made by this method are pouches stuffing pads in cotton or silk and quilting it finely to make patterns with various colored threads of stuffing cotton between linings and spectacle cases, a packet of needles and case of spoon and chopsticks which give various feelings according to arrangement of colors. Design of cultural products by applying the beauty of curves of hanbok, sleave-seam of jeogori, trimming line of dangeui. We expect that various cultural products with Korean traditional beauty and modern convenience will be developed continually by introducing the artistic strength of quilting with dyed thread to practical life.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.46-55
• /
• 2021

Seam puckering and the seam strength of conductive threads used to produce smart clothing were analyzed according to stitching methods and fabrics. Samples were prepared in a lock stitch and zigzag stitch on plain woven and jersey knit fabric, using one type of polyester sewing thread and three types of commercial conductive threads that consisted of two types of stainless-steel conductive threads (TST and MST) and one type of silver conductive thread (SSV). Seam pucker percentages, shapes, and seam strength were measured. On plain woven fabric as well as jersey knit fabric, three-ply TST and MST showed a higher SP percentage compared to a polyester sewing thread. Meanwhile, single-ply SSV showed the lowest SP percentage. In addition, the SP percentage of the zigzag stitch decreased along the weft and course directions of the fabric, and decreased significantly as the number of fabric layers increased. Moreover, there was a marked tendency for a higher SP percentage in jersey knit fabric compared to plain woven fabric, and the two-dimensional cross-section waveforms of stitches obtained using three-dimensional data that showed increased irregular waveforms and peaks in the zigzag stitch. There were no correlations between seam strength and tensile strength.

• Steel and Composite Structures
• /
• v.42 no.1
• /
• pp.49-57
• /
• 2022

This paper presents a study on the behavior of a bolted T-stub to square tube connection using Thread-fixed One-side Bolts (TOBs) through tests and numerical simulations. It outlines a research work of four connections with focus on the failure modes and strengths of the connection under tensile load. It was observed that the thread anchor failure caused by shear failure of hole threads controlled the final failure of the connection in the tests. Meanwhile, the out-of-plane deformation of tube wall resulted in the contact separation between hole threads and bolt threads, which in turn reduced the shear strength of hole threads. Finite element models (FEMs) allowing for the configuration details of the TOBs fixed connection are then developed and compared with the test results. Subsequently, the failure mechanism of hole threads and stress distribution of each component are analyzed based on FEM results. It was concluded that the ultimate strength of connection was not only concerned with the shear strength of hole threads, but also was influenced by the plastic out-of-plane deformation of tube wall. These studies lay a foundation for the establishment of suitable design methods of this type of connection.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.316-323
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of different thread designs on the marginal bone stresses around dental implant. Materials and methods: Standard ITI implant(ITI Dental Implant System; Straumann AG, Waldenburg, Switzerland), 4.1 mm in diameter and 10 mm in length, was selected as control. Test implants of four different thread patterns were created based on control implant, i.e. maintaining all geometrical design of control implant except thread pattern. Four thread designs used in test implants include (1) small V-shape screw (model A), (2) large V-shape screw (model B), (3) buttress screw (model C), and (4) trapezoid screw (model D). Surface area for unit length of implant was 14.4 $mm^2$ (control), 21.7 (small V-shape screw), 20.6 (large V-shape screw), 17.0 (buttress screw) and 28.7 $mm^2$ (trapezoid screw). Finite element models of implant/bone complex were created using an axisymmetric scheme with the use of NISA II/DISPLAY III (Engineering Mechanics Research Corporation, Troy, MI, USA). A load of 100 N applied to the central node on the crown top either in parallel direction or at 30 degree to the implant axis (in order to apply non-axial load to the implant NKTP type 34 element was employed). Quantification and comparison of the peak stress in the marginal bone of each implant model was made using a series of regression analyses based on the stress data calculated at the 5 reference points which were set at 0.2, 0.4, 0.6, 0.8 and 1.0 mm from implant wall on the marginal bone surface. Results: Results showed that although severe stress concentration on the marginal bone cannot be avoided a substantial reduction in the peak stress is achievable using different thread design. The peak marginal bone stresses under vertical loading condition were 7.84, 6.45, 5.96, 6.85, 5.39 MPa for control and model A, B, C and D, respectively. And 29.18, 26.45, 25.12, 27.37, 23.58 MPa when subject to inclined loading. Conclusion: It was concluded that the thread design is an important influential factor to the marginal bone stresses.

• Journal of the Korean Society of Safety
• /
• v.18 no.2
• /
• pp.1-5
• /
• 2003

By using an approach developed to determine the torque-tension relationship for bolted joints, frictional properties of several typical bolted joints were studied experimentally. The specific property by bolted joints certify that the most significant influence of materials and bearing surface condition. Experiments on thread friction shows that prevailing torque nuts with distorted threads provide benefit for preventing self-loosening of the nut. Repeated tightening-loosening generally increases frictions in a bolted joint. It was noted that the data scatter of the experimental results of frictions in a belted joint may overshadow the influence of size. speed, and contact positions. The results from the experimental investigation will help to better design bolted joints.

• The KIPS Transactions:PartA
• /
• v.13A no.3 s.100
• /
• pp.205-210
• /
• 2006

To assist developing robust multithreaded software, we develop a thread monitoring system for multithreaded Java programs, which can trace or monitor running threads and synchronization. We design a monitoring system which has options to select interesting threads and synchronizations. Using this tool, programmers can monitor only interesting threads and synchronization in more details by selecting options. It also provides profile information after execution, which summarizes behavior of running threads and synchronizations during execution. We implement the system based on code inlining, and presents some experimental results.