• Journal of Internet Computing and Services
• /
• v.10 no.5
• /
• pp.27-32
• /
• 2009

Colored thread algorithm, suggested to be used for the label switching network, needs to be modified for the packet switching network. In this paper, it is recommended to add a merged state, besides the 3 states - null, colored and transparent - which are resulted from the behaviors of extend, rewind, stall, withdraw and merge events. The original colored thread algorithm is designed to generate a new thread and extend it to the downstream direction with unknown hop count when the thread has revisited the node that was visited. It also suggested rewinding the thread to the downstream direction by the source node, instead of rewinding it upstream direction by the revisited node. If a node received multiple threads which had a same forward equivalent class, then it checks first whether the hop counts are ascending or not. If it is in ascending order, then threads are merged. Otherwise the later thread is stalled until the former thread's color is to be changed to transparent or it is removed. This idea removes the effort of generating a new thread with unknown hop count.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.375-380
• /
• 2000

The purpose of this study is to verify the relations with the fatigue life and stress distribution on the screw thread for thoracic and lumbar spine. These screws are now developed for Korean in this research group. The fatigue life of single screw was found longer than that of up-left-screw, but shorter than that of up-right-screw. The fatigue life of screw used was associated with the angie between bending and thread direction. In the case of upper left and right screw were fractured in the region of one pitch and two pitch of the thread valley from the shank of pedicle screw, respectively.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.21 no.2
• /
• pp.153-167
• /
• 2005

The purpose of this study was to compare the v-shape thread with the square shape thread of fixture in the view of stress distribution pattern using finite element stress analysis. The finite element model was designed with the parallel placement of two standard fixtures(4.0 mm diameter ${\times}$ 11.5 mm length) on the region of mandibular 1st and 2nd molars. Three dimensional finite element model was created with the components of the implant and surrounding bone. This study simulated loads of 200 N at the central fossa in a axial direction (load A), 200 N at the buccal offset load that is 2 mm apart from central fossa in a axial direction (load B), 200 N at the buccal offset load that was 4 mm apart from central fossa in a axial direction (load C). These forces of load A',B',C' were applied to a $15^{\circ}$ inward oblique direction at that same site with 200 N. Von Mises stress values were recorded and compared in the supporting bone, fixture, and abutment screw. The following results have been made based on this study : 1. The highest stress concentration occurred at the cervical region of the implant fixture. 2. Von Mises stress value of off-site region was higher than that of central fossa region. 3. Square shape thread type showed more even stress distribution in the vertical and oblique force than V-shape thread type. 4. Stress distribution was the most effective in the case of buccal offset load (2, 4 mm distance from central fossa) in the square shape thread type. 5. V-shape thread type revealed higher von Mises stress value than square shape thread type in all environmental condition. The results from numerical analyses concluded that square shape thread type had the lower destructive stress and more stress distribution between the fixture and bone interface than V-shape thread type. Therefore, square shape thread type was regarded as optimal thread configuration in biomechanical concepts.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.72-79
• /
• 2024

This study focuses on combining traditional craft lacquer thread sculpture and augmented reality (AR) technology to develop digital educational content. In this way, we not only make it easier and easier for children to learn and understand the traditional craftsmanship of lacquer thread sculpture, but also finds a new direction for traditional craft education. First, through literature research, the production process of traditional craft lacquer thread sculpture is summarized. Through an in-depth understanding of traditional craft lacquer thread sculpture, it provides a theoretical basis for subsequent AR digital content development to achieve educational goals. Next, we used AR technology to design and produce the digital content of the traditional craft lacquer thread sculpture. This study proposes the application of AR technology and the design and production methods of digital content. It is hoped that the methods and experiences we have proposed will not only provide reference for the development of similar digital content in the future, but also provide new educational methods for the inheritance of traditional crafts.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.2
• /
• pp.185-196
• /
• 2006

Statement of problem: The researches on the influence of design variables on the stress distribution in cortical and trabecular bones and on optimal design for implant system were limited. Purpose: The purpose of this study is to identify the sensitivities of design parameters and to suggest the optimal parameters for designing the onebody type implant system. Material and methods: Stresses arising in the implant system were obtained by finite element analysis using a three dimensional model. An onebody type implant system[Oneplant (Warrantec. Co. Ltd., Korea)] was considered in this study. Vortical load(150 N) was applied on the top of the abutment along the axial direction. The initial design variables set for sensitivity analysis were radius of fixture, numbers of micro thread, numbers of power thread, height of micro thread, future length, tapered angle of future, inclined angle of thread, width of micro thread and width of power thread. The statistical technique of Design of Experiments(DOE) was applied tn the simulation model to deduce effective design parameters on stress distributions in bones. The deduced design parameters were incorporated into a fully automated design tool which is coupled with the finite element analysis and numerical optimization to determine the optimal design parameters. Results: 1. The result of sensitivity analysis showed six design variables - radius of future, tapered angle of fixture, inclined angle of thread, numbers of power thread, numbers of micro thread and height of micro thread - were more influential than the others. 2. The optimal values of design variables can be deduced by coupling finite element analysis (FEA) and design optimization tool(DOT).

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.947-950
• /
• 2005

In this paper, we present an approach to control the locomotion of snake robot with concurrent programming model constructed using threads and semaphores. The multi-thread based concurrent programming model adds the flexibility to design and synchronize the movement of snake robots as compared with microcontroller and mechanical based approaches. We have designed a physical snake robot using LEGO sensors and actuator blocks and the wave motion of the snake robot is generated by multi-thread based concurrent programming under RT-Linux. The different robot movements in a desired direction along with different types of snake movements are achieved using angle sensors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.05a
• /
• pp.21-24
• /
• 1994

A piezoelectric actuator. which is composed of a piezoelectrically driven stator and a rotor, Is made and the characteristics are investigated experimentally is a new ultrasonic actuator which transforms rotary motion to linear one is proposed and proved to work successfully. If an ultrasonic wave is excited to propagate in the stator, particles on the internal surface move elliptically. Since the internal surface is machined as an internal thread and an external thread(rotor) is put into the stator. the external thread is rotated through the friction force and moved in the axial direction. The traveling wave is excited by a piezoelectric element bonded to the stator. This idea is firstly proposed by S. Ueha, et al. in 1987. However, efficiency of their actuator is less than 3%. In this study, in order to improve characteristics of this type actuator, we used various pitches and number of the screw thread, and materials of rotor, and we obtained good charcteristics.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.2
• /
• pp.115-121
• /
• 2015

PURPOSE. This study aimed to evaluate the effect of implant thread depth on primary stability in low density bone. MATERIALS AND METHODS. The insertion torque was measured by inserting Ti implants with different thread depths into solid rigid polyurethane blocks (Sawbones) with three different bone densities ($0.16g/cm^3$, $0.24g/cm^3$, and $0.32g/cm^3$). The insertion torque value was evaluated with a surgical engine. The static compressive strength was measured with a universal testing machine (UTM) and the Ti implants were aligned at $30^{\circ}$ against the loading direction of the UTM. After the static compressive strength test, the Ti implants were analyzed with a Measurescope. RESULTS. The Ti implants with deeper thread depth showed statistically higher mean insertion torque values (P<.001). Groups A and group B had similar maximum static compressive strengths, as did groups C and D (P>.05). After the static compressive strength, the thread shape of the Ti implants with deeper thread depth did not show any breakage but did show deformation of the implant body and abutment. CONCLUSION. The implants with deeper thread depth had higher mean insertion torque values but not lower compressive strength. The deep threads had a mechanical stability. Implants with deeper thread depth may increase the primary stability in areas of poor quality bone without decreasing mechanical strength.

• Journal of Internet Computing and Services
• /
• v.3 no.1
• /
• pp.41-49
• /
• 2002

Ohba has suggested the Colored Thread Algorithm to prevent looped path when LSP is to be setup. M immediate node sends thread information such as color, hop count. ill, to downs1ream node via LDP message for the set-up of LSP. Afterward, decides that the looped path is formed when it receives a message with a same colored thread that was sent to downs1ream node, and it searches another path. If the message reaches to the egress node, then acknowledged message is sent to upstream node as reverse direction to the ingress node to set up loop-free path. For the algorithm, Ohva has defined three thread states as Null, Colored, Transparent. In this paper, the state of thread is extended to 5 states such as Extending, Merging, Stalling, Null, and Transparent. By the way, related FSM and TCB was redefined to make clear the ambiguity of thread states which causes faulty actions and to remove overhead. And, to improve performance, it limits to generate a thread in the state of Stalling.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.1
• /
• pp.36-45
• /
• 1983

In order to characterize the machine tool feed-drive dynamics, thread cutting experiments are performed with cutting conditions and slide-way lubrication varied. During the experiments, the carriage, tool post and tail stock accelerations in the feed direction are measured, and analyzed by employing the spectral analysis method. It is found that the tool post vibration in the feed direction during thread cutting operation is mainly due to those of the carriage and the workpiece. Other structure-related vibrations show little effects on the tool post vibration. The characteristics of the carriage vibration is shown to be fairly consistent, except the vibration amplitude, regardless the variations in cutting condition and lubrication within the experimental range. The experimental results suggest that the feeddrive system can be modelled as a 2 DOF damped oscillatory system.