• 한국전산유체공학회지
• /
• 제4권1호
• /
• pp.8-18
• /
• 1999

In devising a numerical approximation for the convective spatial transport of a fluid mechanical quantity, it is noted that the convective motion of a scalar quantity occurs in one-way, or from upstream to downstream. This consideration leads to a new scheme termed a pure upwind difference scheme (PUDS) in which an estimated value for a fluid mechanical quantity at a control surface is not influenced from downstream values. The formal accuracy of the proposed scheme is third order accurate. Two typical benchmark problems of a wall-driven fluid flow in a square cavity and a buoyancy-driven natural convection in a tall cavity are computed to evaluate performance of the proposed method. for comparison, the widely used simple upwind scheme, power-law scheme, and QUICK methods are also considered. Computation results are encouraging: the proposed PUDS sensitized to the convection direction produces the least numerical diffusion among tested convection schemes, and, notable improvements in representing recirculation of fluid stream and spatial change of a scalar. Although the formal accuracy of PUDS and QUICK are the same, the accuracy difference of approximately a single order is observed from the revealed results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권9호
• /
• pp.2483-2504
• /
• 2023

Most existing low-light enhancement algorithms either use a large number of training parameters or lack generalization to real-world scenarios. This paper presents a novel lightweight and robust pixel-wise polynomial approximation-based deep network for low-light image enhancement. For mapping the low-light image to the enhanced image, pixel-wise higher-order polynomials are employed. A deep convolution network is used to estimate the coefficients of these higher-order polynomials. The proposed network uses multiple branches to estimate pixel values based on different receptive fields. With a smaller receptive field, the first branch enhanced local features, the second and third branches focused on medium-level features, and the last branch enhanced global features. The low-light image is downsampled by the factor of 2b-1 (b is the branch number) and fed as input to each branch. After combining the outputs of each branch, the final enhanced image is obtained. A comprehensive evaluation of our proposed network on six publicly available no-reference test datasets shows that it outperforms state-of-the-art methods on both quantitative and qualitative measures.

• Steel and Composite Structures
• /
• 제10권2호
• /
• pp.129-149
• /
• 2010

The objective of this study is to formulate a general 3D material-structural analysis framework for the thermomechanical behavior of steel-concrete structures in a fire environment. The proposed analysis framework consists of three sequential modeling parts: fire dynamics simulation, heat transfer analysis, and a thermomechanical stress analysis of the structure. The first modeling part consists of applying the NIST (National Institute of Standards and Technology) Fire Dynamics Simulator (FDS) where coupled CFD (Computational Fluid Dynamics) with thermodynamics are combined to realistically model the fire progression within the steel-concrete structure. The goal is to generate the spatial-temporal (ST) solution variables (temperature, heat flux) on the surfaces of the structure. The FDS-ST solutions are generated in a discrete form. Continuous FDS-ST approximations are then developed to represent the temperature or heat-flux at any given time or point within the structure. An extensive numerical study is carried out to examine the best ST approximation functions that strike a balance between accuracy and simplicity. The second modeling part consists of a finite-element (FE) transient heat analysis of the structure using the continuous FDS-ST surface variables as prescribed thermal boundary conditions. The third modeling part is a thermomechanical FE structural analysis using both nonlinear material and geometry. The temperature history from the second modeling part is used at all nodal points. The ABAQUS (2003) FE code is used with external user subroutines for the second and third simulation parts in order to describe the specific heat temperature nonlinear dependency that drastically affects the transient thermal solution especially for concrete materials. User subroutines are also developed to apply the continuous FDS-ST surface nodal boundary conditions in the transient heat FE analysis. The proposed modeling framework is applied to predict the temperature and deflection of the well-documented third Cardington fire test.

• 한국항공우주학회지
• /
• 제43권9호
• /
• pp.799-804
• /
• 2015

본 연구의 목적은 인공위성의 자세제어 추력기 배기가스가 태양전지판에 충돌하여 생기는 동적 영향인 교란력과 교란토크를 분석하는 것이다. 두 개의 매개변수인 태양전지판과 추력기 사이의 거리와 추력기의 경사각을 사용하는 Sweep Analysis를 실시하여 교란력과 교란토크 원(原)데이터베이스를 만들었다. 이 데이터베이스를 기반으로 이 두 개의 매개변수에 의해 달라지는 교란력과 교란토크의 특성을 기술하는 3차 다항 근사식을 만들고, 각 태양전지판의 각(角)위치에 대해 근사식의 계수들을 최종 결과로서 얻는다. 이 결과들은 자세제어계의 입력 자료로서 사용되어 추력기 배치 최적화에 사용된다. 정지궤도복합위성의 후보 태양전지판 두 종류에 이 분석을 적용하여, 교란력과 교란토크 결과를 비교 분석하였다.

• 한국해양공학회지
• /
• 제37권3호
• /
• pp.81-88
• /
• 2023

Maneuverability is a crucial factor for the safety and success of submarine missions. This paper introduces a mathematical model that considers the large drift and angle of attack motions of submarines. Various computational fluid dynamics (CFD) simulations were performed to adapt Karasuno's fishery vessel maneuvering mathematical model to submarines. The study also presents the procedure for obtaining the physics-based hydrodynamic coefficients proposed by Karasuno through CFD calculations. Based on these coefficients, the reconstructed forces and moments were compared with those obtained from CFD and to the hydrodynamic derivatives expressed by a Taylor expansion. The study also discusses the mathematical maneuvering model that accounts for the large drift angles and angles of attack of submarines. The comparison results showed that the proposed maneuvering mathematical model based on modified Karasno's model could cover a large range of motions, including horizontal motion and vertical motions. In particular, the results show that the physics-based mathematical maneuvering model can represent the forces and moments acting on the submarine hull during large drift and angle of attack motions. The proposed mathematical model based on the Karasuno model could obtain more accurate results than the Taylor third-order approximation-based mathematical model in estimating the hydrodynamic forces acting on submarines during large drift and angle of attack motions.

• 대한전자공학회논문지SP
• /
• 제47권2호
• /
• pp.51-60
• /
• 2010

본 논문에서는 백색광 위상천이 간섭계에서 향상된 3차원 형상 정보를 보다 빠르게 얻을 수 있는 새로운 방법을 제안한다. 백색광 위상천이 간섭계는 초정밀 제품의 형상 측정에 사용되는 유용한 방법이다. 첫째, 가시도 함수를 포함하는 간섭신호로부터 3차원 높이 정보를 신속하게 계산할 수 있는 가시도 유효 검출 구간 설정 방법을 제안한다. 둘째, 기존의 백색광 위상천이 간섭계에서 발생하는 전역 기울어짐 현상을 해결하기 위하여 바닥면 데이터 자동 추출 방법과 이를 이용한 최소 제곱 근사화 기반의 바닥 평변 추정 방법을 제안한다. 셋째, 높이의 변화가 큰 경계영역에서의 형상 왜곡인 bat-wing effect를 제거하기 위한 적응 필터 방법을 제안한다. 실험을 통해 제안하는 방법이 기존의 백색광 위상천이 간섭법의 성능을 보다 향상시킴을 보인다.

• Journal of Communications and Networks
• /
• 제16권5호
• /
• pp.548-558
• /
• 2014

Load distribution is vital to the performance of multipath transport. The task becomes more challenging in real-time multimedia applications (RTMA), which impose stringent delay requirements. Two key issues to be addressed are: 1) How to minimize end-to-end delay and 2) how to alleviate packet reordering that incurs additional recovery time at the receiver. In this paper, we propose sub-packet based multipath load distribution (SPMLD), a new model that splits traffic at the granularity of sub-packet. Our SPMLD model aims to minimize total packet delay by effectively aggregating multiple parallel paths as a single virtual path. First, we formulate the packet splitting over multiple paths as a constrained optimization problem and derive its solution based on progressive approximation method. Second, in the solution, we analyze queuing delay by introducing D/M/1 model and obtain the expression of dynamic packet splitting ratio for each path. Third, in order to describe SPMLD's scheduling policy, we propose two distributed algorithms respectively implemented in the source and destination nodes. We evaluate the performance of SPMLD through extensive simulations in QualNet using real-time H.264 video streaming. Experimental results demonstrate that: SPMLD outperforms previous flow and packet based load distribution models in terms of video peak signal-to-noise ratio, total packet delay, end-to-end delay, and risk of packet reordering. Besides, SPMLD's extra overhead is tiny compared to the input video streaming.

• 한국공간구조학회논문집
• /
• 제3권2호
• /
• pp.85-90
• /
• 2003

If we use a third order approximation for the displacement function of beam element in finite element methods, finite element solutions of beams yield nodal displacement values matching to beam theory results to have no connection with the number increasing of elements of beams. It is assumed that, as the member displacement value at beam nodes are correct, the calculation procedure of beam element stiffness matrix have no numerical errors. A the member forces are calculated by the equations of $\frac{-M}{EI}=\frac{{d^2}{\omega}}{dx^2}\;and\;\frac{dM}{dx}=V$, the member forces at nodes of beams have errors in a moment and a shear magnitudes in the case of smaller number of element. The nodal displacement value of plate subject to the lateral load converge to the exact values according to the increase of the number of the element. So it is assumed that the procedures of plate element stiffness matrix calculations has a error in the fundamental assumptions. The beam methods for the high accuracy ratio solution Is also applied to the plate analysis. The method of reducing a error ratio of member forces and element stiffness matrix in the finite element methods is studied. Results of study were as follows. 1. The matrixes of EI[B] and [K] in the equations of M(x)=EI[B]{q} and M(x) = [K]{q}+{Q} of beams are same. 2. The equations of $\frac{-M}{EI}=\frac{{d^2}{\omega}}{dx^2}\;and\;\frac{dM}{dx}=V$ for the member forces have a error ratio in a finite element method of uniformly loaded structures, so equilibrium node loads {Q} must be substituted in the equation of member forces as the numerical examples of this paper revealed.

• 한국정보통신학회논문지
• /
• 제21권8호
• /
• pp.1465-1470
• /
• 2017

기존의 MOSFET에서는 반전층보다 항상 실리콘 두께가 크기 때문에 드레인유도 장벽감소가 실리콘 두께에 관계없이 산화막 두께 및 채널길이의 함수로 표현되었다. 그러나 10 nm 이하 저도핑 이중게이트 구조에서는 실리콘 두께 전체가 공핍층이 형성되기 때문에 기존의 SPICE 모델을 사용할 수 없게 되었다. 그러므로 이중게이트 MOSFET에 대한 새로운 SPICE 용 드레인유도 장벽감소 모델을 제시하고자 한다. 이를 분석하기 위하여 전위분포와 WKB 근사를 이용하여 열방사 및 터널링 전류를 구하였다. 결과적으로 드레인유도 장벽감소는 상하단 산화막 두께의 합 그리고 실리콘 두께의 2승에 비례하며 채널길이의 3승에 반비례한다는 것을 알 수 있었다. 특히 SPICE 파라미터인 정적 궤환계수가 1과 2사이에서 사용할 수 있어 합당한 파라미터로써 사용할 수 있었다.

• 가정과삶의질연구
• /
• 제9권1호통권17호
• /
• pp.45-63
• /
• 1991

The purpose of this study was to develop Family Welfare Program for strengthening Family Life, especially focused on the Family Life Education. In order to perform the above research purpose, this study was organized three sections. First, conceptualizing strong family second, measurement the degree of strong family third, is about the Family Life Education. I defined that the concept of strong family is functional family that is family members(husbands & wives)perform successfully internal family functions. I measured the strong family by means of family function performance scale which is composed by 54 questionnaires. Through the survey study with the family function performance scale. I recognized the necessity of Family Life Education for strengthening family function. Family Life Education(FLE)is an educational specialty which was originated in reaction to changing social conditions, industrialization, and urbanization. It deals with the perceive inadequacies of families to cope with these changes, thereby reducing social problems involved with, and improving family life. With and assumption that the studies about FLE have not been so active in Korea, the present thesis examines the FLE in Korea : i.e., the defintion, the objectives, the scope, the approximation of family life education, and the necessity of marital education in Korea based upon the published theories of FLE in the United States of America. Also, it attemps to formulate tentative plan for the promotion of a FLE program in Korea. The concept of FLE in Korea was mainfested itn the social educational law and lifespan institutional, governmental attention. It is defined as "the family life education to enhance the quality of human life, to solve family problems, to develop and individual's potentiality, and to strengthen the family interaction." Of the FLE program, the marital education is considered one of the crucial subjects because it is the core of the family life. With this premise, FLE tries to support the healthy marital relations, subsequently helping to explore the family potentiality and to strengthen family ties. Considering the seemingly dual characteristics of the contents of marital educations, and effective expressions of mutual affection. In addition, reciprocal understanding and cooperation of the married couples to overcome the differences of value, personality, hobby, and religion, the educational methods in child rearing kids, and the effective management of home economics should be included. The objects of the FLE program are unmarried, pre-married, and married persons. For the married persons, the FLE program should be arranged in accordance with their marital status classified by the family life cycle so that they amy prevent possible family problems t each stages of the family life. Also, to prevent the problems incurred in the course of carrying out family functions, the FLE program should be provided with on the basis of a family unit, there by improving the quality of the family functions.